How to detect if my BB device has GPS support?

Similar Questions

• How do I know if a device has wifi capabilities...

  Hi, is there any class or something to do to find out if a device has hardware wifi inside? Check the list of templates is not a good solution.

  Thank you.

  Use the following call:

  RadioInfo.areWAFsSupported (RadioInfo.WAF_WLAN)

  It is available from the RIM API 4.2.1

• How to detect if a TestStand execution has been terminated?

  We have written a GUI custom that has interface with TestStand to summon and control the execution of the sequence files.  In the course of a writ of execution, the operator can click a STOP button that causes run following code:

  this.myExecutionViewMgr.GetCommand (CommandKinds.CommandKind_Terminate). Execute (true);

  It works well, and TestStand is finished.  However, the event handler EndExecution tell me that execution has been terminated.  Here's what our code looks like:

  void EndExecutionEventHandler (sender As object, EndExecutionEvent ev)

  {

  This line ALWAYS returns SUCCESS or FAILURE

  This. Status = ev.exec.ResultStatus;

  The purpose of the error does not occur when I terminate

  PropertyObject errorObj = ev.exec.ErrorObject;

  If (errorObj.Exists ("occurred", 0) & errorObj.GetValBoolean ("occurred", 0))

  {

  error code string = errorObj.GetValNumber ("Error.Code", 0). ToString();

  string errorText = errorObj.GetValString ("Error.Msg", 0);

  MessageBox.Show (errorCode.ToString () + "-" + errorText);

  }

  }

  Is there a way to identify if a writ of execution has been cancelled, abandoned, etc.?

  You can also use Execution.GetStates and look at the State of cessation of employment to determine if it has been completed.

  -Doug

• What is the best way to detect if the device has a touch screen?

  How do detect you if a device has a touchscreen with version 4.7 of the OS?  With the upcoming 9630, that I need to know he can't stand not touch.  Thanks for the help.

  ~ chris

  No Touchscreen.isSupported () not doing it for you?

• Lion broke Fusion - no boot device has been detected.

  Everything was wonderful until the Lion has eaten my Windows OS...

  I can start to Win 7 under Bootcamp without problem, but when I try to start windows 7 under the terms of the merger, I now get an error message that says no boot device has been found. Here is a screenshot. And Yes, I did uninstall/reinstall merger with the more recent version.

  Any help would be most appreciated.

  Thank you

  Brad

  This is a known issue because the installation of Mac OS X Lion modifies the partition table and all what you need to do is delete the Virtual Machine Boot Camp and add it to the back of the Virtual Machine library.

  Take a look at: VMware Fusion 3 support for Mac OS X Lion (10.7)

  • Boot Camp partitions is not accessible through Fusion after upgrade to Lion.

  To work around this problem, delete the virtual machine Boot Camp of the library and recreate it. For more information, see the virtual machine to Boot Camp fails to turn on with a disk (1003483) error.

• How to detect if the GPS device is connected to the COM port.

  In fact I use Java Comm API to get the GPS NMEA string.
  
  But I want to know, how to automatically find what serial port has the connection to the GPS receiver using the java program?
  
  Please answer me if anyone knows?
  
  Thank you
  
  Kind regards
  
  Maxim G

  Iterate over the ports series, until answered correctly.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• How to detect a Variant empty?

  I get an error when my application passes a variant vacuum (as determined by the probe) to a variant of the function Data. The variant is a Global Variable that has not yet been initialized. I need to avoid calling the variant of the function of data as long as the variant is empty.

  How to detect that a variant is empty? I can't find a function or constant that will help me to do this.

  LabView 2010 is pretty inconsistent about how empty variables of different types are detected. How is there aren't any detection methods of vacuum for each type of data? Why are not always done in the same way?

  You can right click on one of the connectors on a service of alternative variants and select create constant.  This will create a small empty box of purple.  Then you can compare your Variant that and if it is empty, the comparison will be true.

  

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• HOW WE LINK SHARED VARIABLE WITH DEVICE (SENSOR MODBUS ADDRESS) IN E/S SERVER MODBUS

  I USE THE IO SERVER MODBUS WITH SHARED VARIABLES TO COMMUNICATE WITH THREE DEVICES (TEMPERATURE, PRESSURE AND LEVEL DEVICE). EACH DEVICE HAS ITSELF MODBUS ADDRESS TO BE IDENTIFIED IN THE E/S SERVER. THESE DEVICES ARE SUPPORTED BY THE MODBUS SERIES.

  (1) HOW CAN I CONNECT EACH DEVICE SHARED THE DEVICE TO HELP ADDRESS VARIABLE?

  (2) HOW DO I USE THE ADDRESS OF DEVICE FOR IDENTTIFY THE E/S SERVER APPLIANCE?

  COULD YOU HELP ME?

  Thank you

  Hello

  You will find attached a few slides explaining the different steps to create variables shared with e/s server Modbus.

  You can also have a look at the demo on the website.

  I hope this will help you communicate with your devices.

  Kind regards

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• Windows XP SP III, status of the device: a driver (service) for this device has been disabled.

  Windows XP SP III, device status: _ a driver (service) for this device has been disabled.  Another driver can provide this functionality. _ (Code 32)

  Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
  Information how to fix this problem would be apreciated

  Try following the steps for Windows XP in the following MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• How can I reinstall the audio device.

  I used the space on the material. and no installed audio device.

  Hi dc2nice,

  · What is the number and the model of the computer?

  Check whether the sound card is installed on your computer. Follow the steps below:

  a. open the Device Manager by clicking the Start button

  b. click on run

  c. type devmgmt.msc

  d. expand the section audio controllers, video and game to see the sound card you have installed.

  If this article does not appear or is not sound card, your computer does not have a sound card, or the driver for the sound card has not been properly installed.

  If you do not have a sound card, obtain and install one. Contact the manufacturer to check the hardware configuration of the computer and make sure that the sound card is installed.

  If the sound card is already installed then update the sound card. You can check the link below: how to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918

  You can also check: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!