Contacts search

Similar Questions

• iPhone freeze Contact Search, does not properly

  I saw a few chains with a touch Iphone freeze and wanted to tell my experience to see if anyone has seen similar problems.

  I have observed since on IOS 8.3 that my contacts are starting to freeze when I get more than 4 characters.

  The problem seems to be specific to an iPhone 6 more and no matter if I reset the phone as new or not.

  In other words if I reset the phone as new and then restore ONLY the contacts I still have the problem.  Oddly, the problem DOES not occur with an iPhone 6.  I went to the genius bar and we have tested on 2 iphone 6 and it is not a problem.  We then tested on another iPhone 6 more only it was a 6 s iPhone is not a problem 6 and of course similarly.  I checked also iPhone of my wife 6 more and then she has about 6 K contacts and not such a problem, the minute that I charge my 7.5 K comes into contact with the freezing of contacts.

  Apple Care focuses on this, but is also amazed that I am.  They gave me a new iPhone 6 Plus and we have the same problem, so I don't think it's a hardware problem.

  The version of IOS, which began to be a problem for me is the first version of IOS contacts search which, instead of just displaying the name, shows also an additional line of text.

  Given that my contacts are the contacts of GMAIL that I also contacted Google and they have an open box, but do not believe that it is their problem.  I have

  I could document my contacts work very well on 2 iphone 1 iPhone 4S and 6s with the help of a very old operating system to 7.1

  Just an update.

  I talked to Apple Care technical support and they verified that it is a real problem with IOS.  We don't know why this happens to some people and NOT for others.  What is known, it is that the following workarounds may help.

  1. using the microphone to dictate your search (works most of the time, but not 100%)

  2. use the spotlight search and NOT looking for contacts.  Spotlight, accessible by sliding your finger down from the top of the screen will search your contacts as well as other places on your iPhone.  Interestingly enough this seems very well work (probably a simpler search algorithm)

  If anyone has any good ideas for alternatives workarounds or things that apple Care should know that can help their development, please let me know.

• Contacts search does not display in the list of contacts after the future use

  Hello

  I have a small problem with the contacts app after updating to Android 5.0 lollipop on Xperia Z3 Compact. I have a database/list of contacts (local) big (about 800 entries). The problem list when I'm trying to find the contact using Research future - it shows me not all contacts who possesses the same attributes is entered in the search field. For excample: I have 13 inputs which family names starts by " ZA" sentence, but future research shows me only 8 entries from this sentence, but I don't know I have 13 entries with her. The funniest in this is that future research works ONLY WITH CONTACTS used from contacts contacts Unsused approx. will appear after research. I tried to erase the contacts app data parameters - is not worked.

  OK, I have a solution:

  First export all the contacts in a *.vcf file then delete all entries. Then import a backup *.vcf file and voila! Search future work:-)

  Thanks for your attention

• custom data fields and the contacts search term...

  Thus,.

  We have created a unique ID field that corresponds to a field in our database we make our unique on correspondence. I want to be able to find contacts in the field of research on the contacts tab, but it does not work. Even when I change the default view to one that includes this custom field ID it does not work. I'm doing something wrong? Or is this not a feature in this area of research? (And oh how I hope I am doing something wrong and it's doable!)

  Hi Jessica,.

  Unfortunately, searching for contacts through the touch screen is limited in the number of fields, it can browse. The available fields are Email address, first name, last name, and company. Unfortunately cannot be added to this list additional fields. If you need to find contacts by values in other areas, Segmentation would be the only solution.

• Contact Search using the IP address

  If you know the IP address of the visitor, can search you for contacts in Eloqua?

  Hi guys,.

  It is possible to do.

  First of all, make sure you the profile view to have the field profile called "IP address".

  If you run any report of visitor and get the returned data, you can filter the IP address. If the contact associated with this IP address is in your database, you will see them, otherwise the person will be listed as unknown ad.

  In this exercise, you will discover the same person can have multiple IP addresses, it is common that we are working in different places and are always on the move. You will also find l discover several people using the same IP address, which is normal.

  I hope this help you.

• User contact search

  Maluz.plandano

  CX

• BlackBerry smartphones can not use the contact option search on blackberry messenger

  my camera 9360

  I can't use contact search on my blackberry messenger, if I use that just get my blackberry Messenger to block/no response.

  What will happen?

  Pliss help me, brother and sister n

  Thank before and after

  Hmm... I don't know why your BBM contacts are suspended.

  • I would try to backup your BBM contacts on your media card (open BBM > Menu key > Options > backup locally to media card).
  • Then, to delete BBM on your device in Options > advanced > Applications (options > device > Applications)
  • Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.
  • Now, reinstall BBM using your Blackberry browser to www.blackberry.com/bbm
  • restore your identical to the backup above BBM contacts.

• No results found in iPhone Mail search

  I support a medium-sized law firm and several lawyers noted that their search function for their e-mail application works inconsistently. I recently observed that a user can find a search term and getting no results when they have a number of emails containing the search term in their Inbox. I also observed that a user can search and see some terms of the subject lines of messages in their Inbox and still get no search results. I tested this for a single user and searched a number of times. I tried with wifi and wifi turned off. Tried keyword searches and contact searches based on key words. I tried the same search 6 times on the 6th test I got the results, then I tried again, after you try a few other search and don't go to no result.

  After that I updated the iOS to 9.3.1 users I did all this research again and a few more for good measure and all the results returned but I handed the device to the user and it gave once more no results for him while he was trying different search terms.

  I have seen similar behavior on other phones, including my own, but given that the problem disappears usually I updated it. I've now seen enough times in enough different users to think it is probably a more serious problem and people are simply not comment on this.

  How is it possible that the search engine may suggest search pulled terms the subject lines of messages in the Inbox and then return no results when you search for search terms? How is it possible that I can open an email containing the search term, and then when I search for this search term, that I don't get any results?

  We use Office 365. These users all have very large mailboxes. I more than once tried to remove the account and add it again for a user that is affected by this problem, and the problem persisted. I have turned off several times on the phone and turn it back on. I've more than once updated the iOS version on the phone that has the problem. The problem is quite inconsistent that most people just live with it but I heard enough reports at this stage to be concerned, that can happen in a situation where a users MUST find an email and they end up not being able to and my cabinet that could be a costly problem.

  Any help or an explanation of how the mail application might behave in this way would be welcome.

  Thanks in advance!

  Intermittent is almost impossible to diagnose, much less difficulty. (from years of experience, probably like you)

  No answers, but rather suggestions...

  1. file a bug report in the menu here > http://www.apple.com/feedback/iphone.html < expect no return or thank you
  2. Contact the Apple Support - wait to be politely assert in this rise to the top of the chain as 1st responders are
     1. not current high-level Knowledge Bases, and
     2. are sometimes reluctant to show any inability to solve (they think it reflects badly on the performance reports)?

  I'd be interested to hear back NO result you contact - I bet others would too!

  Good luck

• I can't add a new contact on iPhone 6s

  Recently got a new iPhone 6 s. I tried to add a new contact and phone number to my existing list.

  There seems to be no problem until I checked the list and the new contact was not there.

  I looked online and saw another way to do it, by dialing the phone by clicking on the sign more number.

  It was supposed to take me to the page contacts where name etc can be added.

  I did, but to enter the last digit, the sign disappeared. So I tried again but this time

  I thought I would omit the last digit and change it after. Well, it's the same thing.

  Everything seemed fine, but... There is still no sign of him on the list of contacts.

  Even the contacts search shows nothing. Any advice?

  theatrechick wrote:

  There seems to be no problem until I checked the list and the new contact was not there.

  Especially this declaration, supported by the rest of your post, suggests that there is more than one source of your contacts.

  When I think to education "[I] recently received a new 6 iPhone" and I think to enter contacts into an iPhone brand new (without any other reference in your post), I think that you manually type them in.  They would be stored locally only your iPhone, or maybe in iCloud if you have turned on iCloud contacts.  In one of these two scenarios, entering the future contacts would not be a problem, because they would be placed in the only and unique casing that you put in place.

  But in your case, since you never mentioned where your contacts are housed and had this phenomenon of missing contact, it is very likely that you are housing your contacts in several places (e.g., Facebook contacts importers?).

• Milestone - why the contacts application displays only 16 contacts?

  Hi all!

  Something strange with this app - it shows only 16 contacts and when I add a new contact it saves but does not display after (if I type the name of the contact in "contact search" the BONE shows that what we find, but the search using general search (on the home screen) does not find.) Is this normal for this operating system or phone?

  Go to the menu > show groups > Contact groups > check all options box

  worked for me

• Search ODBC

  I'm looking for the best way to get a PIN for a user with a BB device. They are stored on the Microsoft SQL database. I tried the search method remotely on the contacts that works, but leaves an entry in the Contacts search: what programtaically I can not remove. Some users are also in another area. Is it possible to use an ODBC driver in the code? Is there information about what I can read on?

  Thank you.

  Thanks Peter,.

  I was kind of worried about it. The http Service have surely less space in the code...

  Thanks again.

• XPS 12 + two S2340T for three monitors have contact problems

  I am testing a configuration of business as part of our R & D in the field.  I'm running a Dell XPS 12 8.1 Windows.  Last week, I ordered two external monitors S2340T for use with my setup.  In the past, I was able to successfully run the two external monitors for a three monitor Setup.  When I plugged in the first S2340T, everything worked fine. When I connect the other, I lost the ability to screen on the first.  On the second, when I touched the screen, he was interacting as if I touch the screen of the PC clean, despite the fact that he was it running correctly as extended desktop. I finally found that each monitor must be running with the USB cable (I found this in a forum of the year, even if the instructions I received still makes no mention of the need.) At the moment I touch on the screen of Mobile PC, as well as the first S2340T (monitor 1) that I am connected.  The other I'm connected (screen 2) takes any action contact and is the space in the mobile PC display.  If I disconnect 1 monitor, monitor 2 will work perfectly, as expected.  If I plug then 1 monitor, it won't work properly, allowing a contact immediately to show as a touch control on the laptop PC screen (thus imitating the question I had when monitors were reversed). I completely replaced the Dell drivers, even those it says is up-to-date.  I've disabled and upgraded.  At this point, I don't know what to try next.  Dell has recently told me to update my Bluetooth driver for a separate issue and immediately after, I lost the Bluetooth connectivity option and my Bluetooth mouse functionality. After you run an update of the driver from Dell, I lost my Bluetooth receiver on the laptop.  Fortunately, I've seen it before and all I have to do is to re - install the VPN we use SonicWall Global VPN client software.  Restart the system and my Bluetooth is back; but now neither monitor reacts to the touch on the scree, each monitor shows the point of contact as being on my Dell XPS 12.

  Try this...

  * Unplug the two computer screens
  * Reconnect the two monitors by USB 3.0 only (do not use DP or HDMI)
  * Use Windows to configure the monitors in extended mode and save this configuration
  * Go to the control panel
  * Contact search
  * Tablet select configuration - installation
  * You will see a screen that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
  * At this point, press enter
  * This message will move to one of the external screens
  * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
  * Press enter
  * At this point, if only using a screen external, you will be on the tablet settings screen and you can close it. If you use several external displays, the original message will be then posted on other external display
  * You will see a display on the other monitor that says "Touch this screen to identify it as the touch screen if it is not the press serigraphy tablet PC enter to move to the next screen.
  * At this point, press enter
  * This message will move to one of the external screens
  * Press the screen near the message until the message "press on enter to move to the next step in your configuration to compete."
  * Close this window
  * Now every touch screen will work independently without affecting the other or the laptop screen

• BlackBerry Smartphones please help me find my contact list!

  Hello world

  I have a blackberry curve 8900 which I love, but which I think may have violated my mind this time!

  When I go into my contacts to search for a contact it just continues to "Add contact" - when I type the name of the contact in the contact 'find' option then decides to add a new place!

  It will allow me to search my contacts to SIM card, but, being not the most skilled of the people, my contacts are not all on my SIM card.

  If I go through the search icon on my desktop and search through contacts he will allow me to find them there, but I do not understand why my little contact has changed and how to reverse this trend?

  The contacts are there when I go to the SMS of someone, but if I try to send a message via MMS (IE a picture), the same problem of contacts search is performed.

  I'm not the most technologically minded people, but I really like this phone and I don't know what I did wrong!

  If you can help in any way I would be really grateful.

  Thank you xx

  Hello and welcome to the Forums of Support BlackBerry.com.

  Open your address book, then press Menu > filters.

  Now uncheck all filters and save.

  Return to your address book.

  Something there?

• Search for blackBerry Smartphones in the industry or company designation.

  Hi all! I'm new to this forum and this is my 1st post.

  I have the Blackberry Curve and I have 2600 contacts stored in my Blackberry. About 10 to 15 days, I had saved very important number, but problem, it is that I forgot the name with which I saved number and is now in trouble to locate this number. But I know that the city, the Qualification, designation and the sector of this person that I want to record detailed information.

  So is there any solution for the contact search in the company name, designation or sector.

  Someone here please help.

  There no solution for searching for contacts through designation, city, industry, etc. in Blackberry.

  But this is possible only if you install a free app called Zebrost www.zebrost.com software directory

  After the installation of Zebrost you can search for contacts across all areas.

  You must try this.

• Contact ID from a landing page to another

  I am trying to build a variant on a several page form and has difficulties in addition to the elqcontactid of a landing page to another.  Here's the context:

  I want to send an email to the contacts in an education campaign that encourages users to visit one of a number of "cost calculators" written in Javascript and positioned on the Eloqua landing pages hosted.

  The link in my outgoing email takes the contact to landing page 1 that does two things.  The visitor is presented with a progressive form of profiling (or contact search where the elqcontactid is not found) to the door to keep the calculator tools that are on pages 2, 3, or 4 landing. Secondly, the form contains a field lookup that is used to control the page landing (2,3 or 4) to which the user is redirected in a conditional processing time.  Data from the tool of savings on the second page visited needs to write to a CDO linked to the contact record.

  
  So the question is how I pass the elqcontactid (or possibly recipient id) on pages 2, 3 or 4 so that the shape on this second page data be correctly matched? Or is there a better way?

  Your help would be very appreciated!

  Hi Allan,

  Several ways to do so.

  1 contact ID / recipient ID and add it to the URL of the page on page 1 of destination as cid = based on database search scripts, the same do the same on page 2, 3 and 4 to get the same data up on the last page... or

  2. create a hidden field, fill in the value of the cid with the look of data script, make this hidden, it will get submitted on page 1, also do the same on page 2, 3 and 4. You can search the value in each stage of processing for each page before running it (making it conditional)

  I hope this helps. (I choose option 2)

  Thank you

  Amit