User contact search

Similar Questions

• iPhone freeze Contact Search, does not properly

  I saw a few chains with a touch Iphone freeze and wanted to tell my experience to see if anyone has seen similar problems.

  I have observed since on IOS 8.3 that my contacts are starting to freeze when I get more than 4 characters.

  The problem seems to be specific to an iPhone 6 more and no matter if I reset the phone as new or not.

  In other words if I reset the phone as new and then restore ONLY the contacts I still have the problem.  Oddly, the problem DOES not occur with an iPhone 6.  I went to the genius bar and we have tested on 2 iphone 6 and it is not a problem.  We then tested on another iPhone 6 more only it was a 6 s iPhone is not a problem 6 and of course similarly.  I checked also iPhone of my wife 6 more and then she has about 6 K contacts and not such a problem, the minute that I charge my 7.5 K comes into contact with the freezing of contacts.

  Apple Care focuses on this, but is also amazed that I am.  They gave me a new iPhone 6 Plus and we have the same problem, so I don't think it's a hardware problem.

  The version of IOS, which began to be a problem for me is the first version of IOS contacts search which, instead of just displaying the name, shows also an additional line of text.

  Given that my contacts are the contacts of GMAIL that I also contacted Google and they have an open box, but do not believe that it is their problem.  I have

  I could document my contacts work very well on 2 iphone 1 iPhone 4S and 6s with the help of a very old operating system to 7.1

  Just an update.

  I talked to Apple Care technical support and they verified that it is a real problem with IOS.  We don't know why this happens to some people and NOT for others.  What is known, it is that the following workarounds may help.

  1. using the microphone to dictate your search (works most of the time, but not 100%)

  2. use the spotlight search and NOT looking for contacts.  Spotlight, accessible by sliding your finger down from the top of the screen will search your contacts as well as other places on your iPhone.  Interestingly enough this seems very well work (probably a simpler search algorithm)

  If anyone has any good ideas for alternatives workarounds or things that apple Care should know that can help their development, please let me know.

• Contacts search

  How to look at the contacts when I'm on a phone call. I asked for contact phone numbers all the time and can't get out.

  I found that the best thing to do is to make sure that you have a contacts on the home screen application and return to it while talking on the phone. This allows me to talk to a connection bluetooth and search for contacts while still in the conversation.

• Contacts search does not display in the list of contacts after the future use

  Hello

  I have a small problem with the contacts app after updating to Android 5.0 lollipop on Xperia Z3 Compact. I have a database/list of contacts (local) big (about 800 entries). The problem list when I'm trying to find the contact using Research future - it shows me not all contacts who possesses the same attributes is entered in the search field. For excample: I have 13 inputs which family names starts by " ZA" sentence, but future research shows me only 8 entries from this sentence, but I don't know I have 13 entries with her. The funniest in this is that future research works ONLY WITH CONTACTS used from contacts contacts Unsused approx. will appear after research. I tried to erase the contacts app data parameters - is not worked.

  OK, I have a solution:

  First export all the contacts in a *.vcf file then delete all entries. Then import a backup *.vcf file and voila! Search future work:-)

  Thanks for your attention

• custom data fields and the contacts search term...

  Thus,.

  We have created a unique ID field that corresponds to a field in our database we make our unique on correspondence. I want to be able to find contacts in the field of research on the contacts tab, but it does not work. Even when I change the default view to one that includes this custom field ID it does not work. I'm doing something wrong? Or is this not a feature in this area of research? (And oh how I hope I am doing something wrong and it's doable!)

  Hi Jessica,.

  Unfortunately, searching for contacts through the touch screen is limited in the number of fields, it can browse. The available fields are Email address, first name, last name, and company. Unfortunately cannot be added to this list additional fields. If you need to find contacts by values in other areas, Segmentation would be the only solution.

• Contact Search using the IP address

  If you know the IP address of the visitor, can search you for contacts in Eloqua?

  Hi guys,.

  It is possible to do.

  First of all, make sure you the profile view to have the field profile called "IP address".

  If you run any report of visitor and get the returned data, you can filter the IP address. If the contact associated with this IP address is in your database, you will see them, otherwise the person will be listed as unknown ad.

  In this exercise, you will discover the same person can have multiple IP addresses, it is common that we are working in different places and are always on the move. You will also find l discover several people using the same IP address, which is normal.

  I hope this help you.

• the user contact form

  I would like to include a form of information for a user to send me specific contact information; that I can go back to their investigation. I have a test page to www.oakmomntelks.com/contactinfo.htm.
  
  I have several questions: how whites "fill" line up evenly?
  
  How to bind the 'Send' button to send this info to my email address?
  
  Thank you

  Your link is incorrect.

  Your form page has no container (div or table) so your items are all
  flush left.

  "Allsopp" wrote in message
  News:fs40su$2gr$1@forums. Macromedia.com...
  > I would like to include a form of information for a user to send me
  > specific
  > coordinated; that I can go back to their investigation. I have a test page
  > to
  > www.oakmomntelks.com/contactinfo.htm.
  >
  > I have several questions: how whites 'fill' to align
  > evenly?
  >
  > How to link the 'Send' button to send this info to my email address?
  >
  > Thank you
  >

• BlackBerry: Improved interface user KeywordFilterField search

  
  

  I do not use this area because I wrote a similar field a long time ago that I use instead.  After reviewing the field however, the principles are the same - a search field entry and a ListField which displays the corresponding arguments.  So I think you can use the same approach I use in my own equivalent field.

  Assuming that you have a screen, then put an EditField in your title area or a banner

  setTitle (...)

  or

  setBanner (...)

  Add the KeywordFilter field to the normal part of the screen scrolling.

  Then use setKeywordField to use the field that you put in the title/banner as the entry in the filter area.  This means that the keyword will stay on top, while the scrolling of the list of filter.

  If you need more complex where the filter field went to the bottom of the screen, we can work similar magic but it is a bit more complicated.

  You might find follows her useful if you're not familiar with the screen.

  http://supportforums.BlackBerry.com/T5/Java-development/MainScreen-explained/Ta-p/606644

• ATG-short integration - change the query of the user's search term before being sent to short

  All testing the ATG-short front-end search/browse integration in a commerce application of my organization, one of our QA team members noticed as a search term consisting of just a vertical pipe character ("" | "") would cause the full product catalog to return in the results of research, as if every product in the catalogue was a match to that search term.

  This behavior can be seen in the Application of reference short JSP as well, so that this behavior does not appear to be caused by something that makes our custom application code.

  It is an undesirable behavior for our application - the company prefers that we do not show the entire catalog of products at the same time unless he is cut down somehow (whether via a word search or by the application of filters of properties).

  I plan to implement a solution to wash just ' | ' characters of the search term entry.  It would be pretty easy to do on the client side, but as with any other web application input validation, we really want to do this on the side server.

  I think that this should be done by the substitution of / expand part of the OOTB ATG pipeline where it sends the search request to short for treatment.  However, this is not something I've done before.  I read in Chapter 7 of the ATGEndecaIntegrationGuide.pdf ("application integration"), but it's not immediately obvious to me how/where I'd be better on the substitution of / extend an OOTB ATG component for making filter ' | ' characters in the search query term.

  All the world is this kind of thing before?  If so, could you please describe how you went to?

  Thank you!

  -Jon

  I ended up implementing this as follows:

  -Create a new class that extends the class InvokeAssembler;

  -Implement a custom InvokeAssembler.properties file that points to my new class derived;

  -In service () of the new derived class method, use methods of the DynamoHttpServletRequest to filter pipe characters in the value of the Ntt parameter and the query string.  Then call super.service () to handle the demand.

  -Jon

• BlackBerry smartphones can not use the contact option search on blackberry messenger

  my camera 9360

  I can't use contact search on my blackberry messenger, if I use that just get my blackberry Messenger to block/no response.

  What will happen?

  Pliss help me, brother and sister n

  Thank before and after

  Hmm... I don't know why your BBM contacts are suspended.

  • I would try to backup your BBM contacts on your media card (open BBM > Menu key > Options > backup locally to media card).
  • Then, to delete BBM on your device in Options > advanced > Applications (options > device > Applications)
  • Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.
  • Now, reinstall BBM using your Blackberry browser to www.blackberry.com/bbm
  • restore your identical to the backup above BBM contacts.

• No results found in iPhone Mail search

  I support a medium-sized law firm and several lawyers noted that their search function for their e-mail application works inconsistently. I recently observed that a user can find a search term and getting no results when they have a number of emails containing the search term in their Inbox. I also observed that a user can search and see some terms of the subject lines of messages in their Inbox and still get no search results. I tested this for a single user and searched a number of times. I tried with wifi and wifi turned off. Tried keyword searches and contact searches based on key words. I tried the same search 6 times on the 6th test I got the results, then I tried again, after you try a few other search and don't go to no result.

  After that I updated the iOS to 9.3.1 users I did all this research again and a few more for good measure and all the results returned but I handed the device to the user and it gave once more no results for him while he was trying different search terms.

  I have seen similar behavior on other phones, including my own, but given that the problem disappears usually I updated it. I've now seen enough times in enough different users to think it is probably a more serious problem and people are simply not comment on this.

  How is it possible that the search engine may suggest search pulled terms the subject lines of messages in the Inbox and then return no results when you search for search terms? How is it possible that I can open an email containing the search term, and then when I search for this search term, that I don't get any results?

  We use Office 365. These users all have very large mailboxes. I more than once tried to remove the account and add it again for a user that is affected by this problem, and the problem persisted. I have turned off several times on the phone and turn it back on. I've more than once updated the iOS version on the phone that has the problem. The problem is quite inconsistent that most people just live with it but I heard enough reports at this stage to be concerned, that can happen in a situation where a users MUST find an email and they end up not being able to and my cabinet that could be a costly problem.

  Any help or an explanation of how the mail application might behave in this way would be welcome.

  Thanks in advance!

  Intermittent is almost impossible to diagnose, much less difficulty. (from years of experience, probably like you)

  No answers, but rather suggestions...

  1. file a bug report in the menu here > http://www.apple.com/feedback/iphone.html < expect no return or thank you
  2. Contact the Apple Support - wait to be politely assert in this rise to the top of the chain as 1st responders are
     1. not current high-level Knowledge Bases, and
     2. are sometimes reluctant to show any inability to solve (they think it reflects badly on the performance reports)?

  I'd be interested to hear back NO result you contact - I bet others would too!

  Good luck

• Windows 7 backup error: "backup Windows ignored C:\Users\... because it's on corrupt C:\ drive.»

  Hello

  I bought a new computer recently with Windows 7 installed and regularly use Windows backup since my purchase with no problems.  However, a couple of days, I tried to backup my system and received a message saying that the backup completed, but some files were ignored.  As soon as the journal view, that's what I find:

  Windows skipped C:\Users\Jonathan\Documents backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Documents backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Pictures backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Pictures backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Videos backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Videos backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\AppData\Roaming backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\AppData\Local backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\AppData\LocalLow backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Contacts backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Desktop backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Downloads backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Favorites backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Links backup because it is about corrupt C:\ drive.
  Backup Windows ignored C:\Users\Jonathan\Saved games as it is on corrupt C:\ drive.
  Windows skipped C:\Users\Jonathan\Searches backup because it is about corrupt C:\ drive.

  It seems that Windows Backup jumped basically every valuable piece of data on my PC.  I did a search for answers and it seems that when people have this problem backup Windows still do not know the same libraries (pretend to prove that it is not a problem of material with the HARD drive). and the only suggestion I could find was to run the chkdsk utility, then attempt a backup again.  I have since run the utility chkdsk twice and it found no errors, and I continue to have this problem when you save.

  Beyond running the chkdsk utility and reboot for a third time, can anyone help?

  Thanks in advance.

  I think that this is the case because of a virus (incase your pc is not protected or a new threat has developed).

  Please install an antivirus.
  I suggest Microsoft Security Essentials.Scan all the files and then try again.
  Or try freeing up space on the drive you store the backup in the c DRIVE.
  or try to move your important files to an external USB key or hard drive and format your pc :)
  That will solve almost all your problems.
  In case you need help with anything else or this does'nt resolve your problem, mail me or reply to this post of mine.
  Nanou NASH.
  The computer assistant.

• Search ODBC

  I'm looking for the best way to get a PIN for a user with a BB device. They are stored on the Microsoft SQL database. I tried the search method remotely on the contacts that works, but leaves an entry in the Contacts search: what programtaically I can not remove. Some users are also in another area. Is it possible to use an ODBC driver in the code? Is there information about what I can read on?

  Thank you.

  Thanks Peter,.

  I was kind of worried about it. The http Service have surely less space in the code...

  Thanks again.

• Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))

  At the end of the new backup, the following error message appears; Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002)) and files are the following:

  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\IUSR_NMPR\Searches file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Guest\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Guest\Searches file. Error: (the system cannot find the specified file. (0 x 80070002)

  Any help to help solve the problem and remove these files unless they need to be backed up. I tried and failed to find the files. Please note that windows 8 pro had cleaned originally had windows Vista, even I did find something on the error code: error: (the system cannot find the specified file. (0 x 80070002))

  Hey Amer,

  You can ignore this error message. You would usually encounter this problem if the Windows Backup tries to back up files in folders LocalLow, Contacts and research and these files are not present on your computer.

  Well, you also have an option to create or exclude files missing, listed in the error message.

  If you want to exclude this folder then please refer to the following steps.

  (a) in the backup section, click on "change settings".

  (b) in the dialog box Configure the backup , click Next.

  (c) in the 'you want to save ' dialog box, click on 'Let me choose ', then click on 'Next '.

  (d) navigate to the user profile folder displayed in the error message and clear the check box next to the folders.

  (e) save and exit.

  Hope the helps of information.

• Contact ID from a landing page to another

  I am trying to build a variant on a several page form and has difficulties in addition to the elqcontactid of a landing page to another.  Here's the context:

  I want to send an email to the contacts in an education campaign that encourages users to visit one of a number of "cost calculators" written in Javascript and positioned on the Eloqua landing pages hosted.

  The link in my outgoing email takes the contact to landing page 1 that does two things.  The visitor is presented with a progressive form of profiling (or contact search where the elqcontactid is not found) to the door to keep the calculator tools that are on pages 2, 3, or 4 landing. Secondly, the form contains a field lookup that is used to control the page landing (2,3 or 4) to which the user is redirected in a conditional processing time.  Data from the tool of savings on the second page visited needs to write to a CDO linked to the contact record.

  
  So the question is how I pass the elqcontactid (or possibly recipient id) on pages 2, 3 or 4 so that the shape on this second page data be correctly matched? Or is there a better way?

  Your help would be very appreciated!

  Hi Allan,

  Several ways to do so.

  1 contact ID / recipient ID and add it to the URL of the page on page 1 of destination as cid = based on database search scripts, the same do the same on page 2, 3 and 4 to get the same data up on the last page... or

  2. create a hidden field, fill in the value of the cid with the look of data script, make this hidden, it will get submitted on page 1, also do the same on page 2, 3 and 4. You can search the value in each stage of processing for each page before running it (making it conditional)

  I hope this helps. (I choose option 2)

  Thank you

  Amit