Content of PersistenObject disappears after you remove the app and the new facility

Similar Questions

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• The green arrows front and rear under file and Edition disappeared after I downloaded the new Firefox toolbar. How to recover?

  The green arrows to page forward or backward at the top left under the file and edit disappeared after I downloaded the new toolbar for Firefox (for 3.6) and was replaced by the most visited, getting started and last new icons, which I have little use for. How to bring back the original toolbar?

  If the Navigation toolbar is not be displayed? See below.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M then release the key
  Windows method 2 Press the F10 key, while the Menu bar, choose "view > toolbars", click on 'Menu Bar' so that a check mark next to the Menu bar
  Method Windows 3 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar as well as a checkbox is placed next to Menu bar
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See:

  http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  

  http://KB.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• Issue of SDRS to vCloud Director after you add the new data store to the Cluster of DTS

  Hi people,

  We use vCloud Director 5.5 in a vSphere full 5.5 environment.

  We have several DTS Cluster in vSphere and connected to vCloud Director.

  Following problem.

  When I add a data store to a Cluster of DTS and connect this to the corresponding storage profile data store, the storage profile is not available to vCloud Director more.

  After removing the new store data in the cluster of DTS, the profile becomes available again.

  Any ideas?

  Concerning

  Jean

  How did you the storage profile associated with the data store?  via c# client or vSphere web client?

  If you did the wrong way (c#) there no storage class label appropriate against it.

  A data cluster store has the storage class who would have all preparations of data contained inside.

  I think that you should check the service class is associated properly in vSphere web client (before adding to the DS Cluster).  Once it displays correctly, and then add the data store to the cluster.

• After you add the new toolbar after clicking on the fact, made new TB cases disappear. Has worked w / all the worms. FF so far.

  I got a toolbar additional ((àle total de 3 personnalisé ajouté deles de barres d'outils) that was just too much to place & need 2 remove it.) No option to remove the toolbar named singularly, only option available was 2 toolbar reset, I did & began to build again once I added called "weather", he created & defining the space available, but after I hit 'complete' on customize toolbar, he disappeared. Find that I am unable to create and maintain new toolbars to help customize the toolbar. This is the first I have reset my toolbar and found this problem.

  Have you done something to the new toolbar before you clicked Add? Empty custom toolbars are removed automatically.

• How can I access the dialog "Manage search engines", after you remove the search bar?

  I removed the esarch bar, since I can get exactly the same functionality through the url bar (also called awsome bar, I think). I use several search engines but select the default ones with key words.

  The only thing I'm missing is the ability to access the dialog box "manage search engines". The only geto him he seems to be the drop search bar icon. Is it possible to access this dialogue without having to add (and re - hide the afterwords) the search bar?

  You can create a bookmark with this chrome URL:

  • chrome://browser/content/search/engineManager.XUL

• Chaos of partition after you remove the boot camp partition

  Hello guys,.

  After that I was updating win10 with the new update... that was a bad idea... I tried to do a clean install of it.
  After failing to do so hard, im really stuck and don't know what to do:

  boot camp will not let me delete, they 3rd option is still grayed out. so I deletet with tool drive and tried to install win10 via boot camp several times - it does not work because that is always something worng with the partition I chose to install it.

  No, I think I really messed up my partitions and I don't really know what to do anymore, so I post this:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage GB internal Drive 483,9 disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Reserved 16.8 MB disk1s4

  5: Windows Recovery 471.9 MB disk1s5

  6: EFI No. 104.9 MB disk1s6 NAME

  7: Apple_HFS 123 514,7 GB disk1s7

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 599,0 GB disk2

  Logical volume on disk0s2, disk1s2

  1D528A9D-C552-417B-BF2A-C9C6AA49B5FD

  Fusion unencrypted drive

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * disk3 16.0 GB

  1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1could help me

  Maybe someone can help me to get through this... I don't really know what it takes to "reset" my scores so I can again reinstall win10.

  iMac 5 k late 2014, 1 TB fusion drive, el capitan 10.11.6

  Disconnect external drives until Windows is completely installed.  If you are prompted for a USB key, use only a not a USB HDD, flash drive.

  You seem to have deleted the partition of BC using disk utility, which is not a good idea. Do not mix BC Assistant and disk utility.

  Perform the following two procedures after each failed attempt.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  In the current state, disk1s4-disk1s7 should be merged into one FAT32 partition, if you want to re - use for BC/Windows.

• HP15: error Hp printer after you remove the program from the printer.

  I looked in the startup of Windows C. and ran msconfig, but can not find the files that has been said in the previous post.

  So what I do now? I want to get rid of this error message at the beginning upward

  Hey @vmundy2,

  Thanks for getting back to me on this subject.

  The HPStatusBl.dll is alerts ink Monitor on the computer. The uninstall process could not delete the shortcut for it.

  I can have you try the steps mentioned by my colleague @HevnLgh here: Re: DLL problem run to remove the specific file.

  Please let me know if these steps resolve the dll error. Good luck!

• hidden files after you remove the virus from windows recovery.

  Original title: cannot open files by users, but can search for them.

  Hello.

  I have a Sony Vaio model VGN-AR71E running Vista Home premium. He recently got infected with a fake trojan of the anti-virus/malware, which was successfully deleted.

  The virus initially seems to have erased all the etc. documents/photos/music on my laptop. Users, there is only an empty file "public". However when I search for a file by using the start menu, I can find and open a file and the location is listed as it was before the virus (for example C:/users/me/images etc.). Also when I run itunes all my music is still listed as usual and plays.

  Has anyone advice on how to restore my user profile, so that I can access my files easily again?

  Thank you.

  Hello

  do you remember the name of the malicious software?

  If it's "Windows Recovery" read the information contained in the link

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

• ValueChangeListner do not get fired when I entered the same value after you remove the first.

  Hello world

  Can anyone help on this.

  JDeveloper version 11.1.1.7

  I use '< af:inputText >' with valueCaangeListner.

  Here as soon as I entered a value, valueChangeListener get fired...

  Problem:

  When I remove the and I entered the same gain value in the text entry box, ValueChangeListner do not get fired.

  When I came again, a value different valueChangelistner get me fired.

  Kind regards

  Malenfant.

  What you say is logic and sense, you enter 500 then delete 00 then add 00 in inputText perspective there is no change in place, therefore, the converter does not occur because there is no changes occur.

  To do something like that you can do a work around using javascript. You can follow these steps:

  1. Select af:inputText and bind it to the backbean

  2 - Add clientListener and serverListener inside inputText as:

  3 - Add handelEnterButton as javascript method:

  function handelEnterButton(event)
  {
    var code=event.getKeyCode();
    if (code==13)
    {
       var source = event.getSource();
       AdfCustomEvent.queue(source,"serverListenerOperations", {}, false);
    }
  }
  

  4. in the method of serverListener back bean refresh as inputText component:

    public void serverListener(ClientEvent clientEvent)
    {
      RequestContext.getCurrentInstance().addPartialTarget(getMyInputTextComponent());
    }
  

  5. now, try to change something in the inputText and then press enter

• After you download the new version of firefox, I didn't like it and tried to restore my system to an earlier time and version of firefox. Now that firefox does not open, even the old version isn't there more.

  I want to get firefox, keeping all bookmarks.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Issue after you create the new partition, Bootcamp expansion

  Hello

  I hope someone can help with a problem I'm having.

  I found an old Apple discussion on how to resize a partition, bootcamp, by reducing the size of the OS X partition, then using a Windows based tool to then extend the Bootcamp partition. Big mistake! I'm done with the same problem as the creator of this thread with my Windows no longer bootable partition.

  I followed the steps described by lonely T, which worked perfectly! Thank you very much!

  Then, I went into Windows and use the Partition Mini tool to extend the Windows partition in the unallocated partition, which worked fine in Windows.

  However when I boot in OS X and open disk utility I see now 3 separate partitions. (1) mac HD. ((2) Untitled (the one I created) 3) Windows HD (Bootcamp). Then OS X is not recognizing that I extended the Windows HD partition in the Untitled one.

  Is there a way to solve this problem without ruining it now expanded Windows partition? Windows does not seem to see two separate partitions, only in OS X I downloaded GPT Fdisk

  Thanks in advance!

  Output below:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 637,5 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: Apple_HFS 173,7 GB disk1s4

  5: Microsoft Windows HD 188.0 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 750.0 GB disk2

  Logical volume on disk0s2, disk1s2

  D3F5913D-0A32-4BE8-BD44-A65885746DA0

  Fusion unencrypted drive

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk3

  1: EFI EFI 209.7 MB disk3s1

  disk3s2 2: Apple_HFS My Book Studio has 1.5 TB

  / dev/disk4 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk4

  1: EFI EFI 209.7 MB disk4s1

  2: Apple_HFS My Book Studio B 1.5 TB disk4s2

  Cs diskutil list

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 23846179-0CBE-42F5-A375-0D969F4C789E

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 758507479040 B (758.5 GB)

  Free space: 229376 B (229.4 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 637518626816 B (637.5 GB)

  |

  + -> 41CF6816-F84F-4D76-A6FD-97288E448BF7 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume D3F5913D-0A32-4BE8-BD44-A65885746DA0

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 749999882240 B (750.0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo TPG - vv - r see the/dev/disk1

  See the TPG: / dev/disk1: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk1: MBR suspicious to sector 0

  See the TPG: / dev/disk1: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk1 ': Undefined error: 0

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  sudo fdisk/dev/disk1

  Disk: geometry / dev/disk1: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 25 127 15 - 1023 254 63 [409640-1245153568] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1245563208-1269760]

  * 04:07 1023 254 63-1023 254 63 [1246834688-706689024] HPFS/QNX / TO THE

  Did you install GPT Fdisk as described in Re: can not start windows after resizing partitions ? If so, can you post the output of 'p' command of Gdisk?