Issue after you create the new partition, Bootcamp expansion
Hello
I hope someone can help with a problem I'm having.
I found an old Apple discussion on how to resize a partition, bootcamp, by reducing the size of the OS X partition, then using a Windows based tool to then extend the Bootcamp partition. Big mistake! I'm done with the same problem as the creator of this thread with my Windows no longer bootable partition.
I followed the steps described by lonely T, which worked perfectly! Thank you very much!
Then, I went into Windows and use the Partition Mini tool to extend the Windows partition in the unallocated partition, which worked fine in Windows.
However when I boot in OS X and open disk utility I see now 3 separate partitions. (1) mac HD. ((2) Untitled (the one I created) 3) Windows HD (Bootcamp). Then OS X is not recognizing that I extended the Windows HD partition in the Untitled one.
Is there a way to solve this problem without ruining it now expanded Windows partition? Windows does not seem to see two separate partitions, only in OS X I downloaded GPT Fdisk
Thanks in advance!
Output below:
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage Macintosh HD 637,5 GB disk1s2
3: disk1s3 Apple_Boot Recovery 650,1 MB HD
4: Apple_HFS 173,7 GB disk1s4
5: Microsoft Windows HD 188.0 GB disk1s5 data base
/ dev/disk2 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 750.0 GB disk2
Logical volume on disk0s2, disk1s2
D3F5913D-0A32-4BE8-BD44-A65885746DA0
Fusion unencrypted drive
/ dev/disk3 (external, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.5 to disk3
1: EFI EFI 209.7 MB disk3s1
disk3s2 2: Apple_HFS My Book Studio has 1.5 TB
/ dev/disk4 (external, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.5 to disk4
1: EFI EFI 209.7 MB disk4s1
2: Apple_HFS My Book Studio B 1.5 TB disk4s2
Cs diskutil list
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 23846179-0CBE-42F5-A375-0D969F4C789E
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 758507479040 B (758.5 GB)
Free space: 229376 B (229.4 KB)
|
+-< physical="" volume="">
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-< physical="" volume="">
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 637518626816 B (637.5 GB)
|
+ -> 41CF6816-F84F-4D76-A6FD-97288E448BF7 family of Logical Volume
----------------------------------------------------------
Encryption type: no
|
+-> Logical Volume D3F5913D-0A32-4BE8-BD44-A65885746DA0
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 749999882240 B (750.0 GB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
sudo TPG - vv - r see the/dev/disk0
See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 236978175
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 table dry GPT
236978175 1 dry GPT header
sudo TPG - vv - r see the/dev/disk1
See the TPG: / dev/disk1: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168
See the TPG: / dev/disk1: MBR suspicious to sector 0
See the TPG: / dev/disk1: Pri GPT to sector 1
See the TPG: error: wrong card
See the TPG: could not open device ' / dev/disk1 ': Undefined error: 0
sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-236978175]
02:00 0 0 0-0 0 0 [0-0] unused 03:00 0 0 0-0 0 0 [0-0] unused 04:00 0 0 0-0 0 0 [0-0] unused sudo fdisk/dev/disk1 Disk: geometry / dev/disk1: 121601/255/63 [1953525168 sectors] Signature: 0xAA55 From end #: cyl hd s - cyl hd s id [Start - size] ------------------------------------------------------------------------ 1: EA 0 0 2 - 25 127 14 [1-409639]
2: AF 25 127 15 - 1023 254 63 [409640-1245153568] HFS +. 3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1245563208-1269760] * 04:07 1023 254 63-1023 254 63 [1246834688-706689024] HPFS/QNX / TO THE Did you install GPT Fdisk as described in Re: can not start windows after resizing partitions ? If so, can you post the output of 'p' command of Gdisk? Tags: Windows Software Repair your startup disk Bootcamp disappearing after you create the new partition . After some research, I found that it was the way forward to create a separate partition, and so I did another partition. I didn't know it would affect my Windows partition that I thought it was completely different. So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there. I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you. (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated) For reference: Aerospews-MBP: ~ the marcuslo list $ diskutil / dev/disk0 (internal, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 500,3 disk0 1: disk0s1 EFI EFI 209.7 MB 2: Apple_HFS Macintosh HD 350,7 GB disk0s2 3: disk0s3 Apple_Boot Recovery 650.0 MB HD 4: Apple_HFS 47.6 Untitled GB disk0s4 5: Microsoft database BOOTCAMP 101,0 GB disk0s5 Aerospews-MBP: ~ list of cs marcuslo$ diskutil No logical volume group CoreStorage found Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0 See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060 See the TPG: / dev/disk0: PMBR to sector 0 See the TPG: / dev/disk0: Pri GPT to sector 1 See the TPG: / dev/disk0: GPT Sec at sector 977105059 start index size summary 0 1 PMBR 1 1 Pri GPT header 2 32 table GPT Pri 34 6 40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B 409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC 685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC 686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC 779577344 262144 779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 977104896 131 977105027 32 table dry GPT 977105059 1 dry GPT header Repair after you create the new Boot Camp partition Hi, I know there have been many discussions on this topic, so apologies for the same question, but I hope someone will help me with my problem-specific instructions. My configuration: MacBook Pro, end of 2014 10.11.2 OS Partition Bootcamp running Windows 10 Situation diskutil list / dev/disk0 (internal, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 500,3 disk0 1: disk0s1 EFI EFI 209.7 MB 2: Apple_CoreStorage Macintosh HD 435,4 GB disk0s2 3: disk0s3 Apple_Boot Recovery 650,1 MB HD 4: Microsoft database BOOTCAMP 64.0 GB disk0s4 / dev/disk1 (internal, virtual): #: NAME SIZE TYPE IDENTIFIER 0: Apple_HFS Macintosh HD GB + 435,1 disk1 Logical volume on disk0s2 E060DCB6-14B6-4F2C-91B9-0134D9D0B3FC Unlocked encrypted / dev/disk2 (external, physical): #: NAME SIZE TYPE IDENTIFIER 0: GUID_partition_scheme * GB 64.0 disk2 1: disk2s1 EFI EFI 209.7 MB 2: Apple_HFS WININSTALL 63.7 GB disk2s2 sudo fdisk/dev/disk0 Disk: geometry / dev/disk0: 60821/255/63 [977105060 sectors] Signature: 0xAA55 From end #: cyl hd s - cyl hd s id [Start - size] ------------------------------------------------------------------------ 1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AC 1023 254 63 - 1023 254 63 [409640-850425816]
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [850835456-1269760] 4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [852105216-124999680] sudo gdisk/dev/disk0 GPT fdisk (gdisk) version 1.0.1 WARNING: Open with shared lock devices will not have their table partition automatically reloaded! NOTE: Pass the test failed with the error number 1. It will be impossible to save changes to the table to partition on this drive! You may have to disable the Protection of the integrity of the system to use this program. See https://www.Quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11 For more information. Scanning partition table: MBR: hybrid BSD: absent APM: absent TPG: present Found a valid GPT with hybrid MBR; using GPT. Command (? for help): p Disk/dev/disk0: 977105060 sectors, GiB 465.9 Logical sector size: 512 bytes Identifier (GUID) of disc: 09E0BC34-38AB-4D4D-9739-8054E7CD02D6 Partition table contains up to 128 entries First usable sector is 34, last usable area is 977105026 The partitions will be aligned with the boundaries of sector 8 Space free total is 137 sectors (68.5 KiB) Starting number (sector) end (sector), Code name of size 409639 40 1 200.0 of MiB EF00 EFI system partition 2 409640 850835455 405,5 giB AF05 customer 3 850835456 852105215 620,0 MiB AB00 Recovery HD 4 852105216 977104895 59.6 giB 0700 BOOTCAMP Thank you! Please after the release of sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C After creating the new partition Boot Camp of fixation Hi, I tried to resize my Windows 10 bootcamp but changed my mind, when I deleted the empty partition without title and will reboot my computer to start with Windows, it does not appear (I pressed the option key alt is told by the way). So a way to solve this problem of boot camp after having created a new partition? I deleted this partition empty, just to let you know again. Thank you. Some screenshots of my disk utility (http://imgur.com/a/3dyle): Satellite P100-429, stopped after you create the partition on the HARD disk After you create the partition on the HARD disk. PC just stopped. Hello Express media player has been installed on the partition of the laptop? Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive. After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks" Create the New Partition of the former created Partition Mr President. Hello Make sure that you have free space in each drive for better performance. When free disk space reaches 200 megabytes (MB) or less in a car, you will be prompted to free space in the disk. See the below items to create a new partition. How to use disk management to configure basic disks in Windows XP How to partition and format a drive hard using the Windows XP Setup program Photosmart HP 5510 will be not printed black before and after you installed the new cartridge. The specified controls did. Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually. Bootcamp does not start after you have created the new partition Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this? Thanks in advance. The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected HP pavilion model - 17-e054ca After upgrading to PRO 8.1 window I see I want to save system image backup 1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him? 1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him? If yes how to create new partition in win.8.1? (1) YES. Please see Computers HP - partitioning and naming (Windows 8) readers for the instructions titled "create a new partition. 2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images (2) YES, provided that you mean a 'repair Windows USB drive '. 3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\ (3) If you "reinstall OS" a set of recovery discs HP or an HP Recovery USB Flash drive, partition 'E:\. "is erased as support for HP recovery returns the computer to a factory State. I suggest that you store your "Backup of System Image" windows on an external hard drive for best results. 4. What is-locations of D:\ marked as recovery? (4) the purpose of the "D:\". "HP recovery partition is to create your recovery HP personal media, return the computer to a factory State and restore the originally installed drivers and software. If you have any other questions, feel free to ask. Please click the 'Thumbs Up' white LAURELS to show your appreciation politics does not create the new partition Location: I have an old XP computer where I want to add a second partition. The computer is part of a network of SBS 2008. Nor, disk management, or line of Diskpart command let me add a partition. According to Microsoft, literature, network policy settings may prevent you from creating a new partition. I connect locally on the computer, but still cannot add the partition. Question: How can I locally disable/change the policy setting to allow me to add a new partition? Thank you Two links that may be useful. How to use the Group Policy Editor to manage local computer policy. http://support.Microsoft.com/kb/307882 Microsoft Windows XP - change local Group Policy object. Hope these are useful, InDesign CC closes unexpectedly when you create the new document Hi, my CC Indesign closes unexpectedly whenever I try to create a new document. Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves. I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work. CS6 Illiustrator crashes when you create the new file Hello. I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working. Windows 7 Hompe premium x 64 processor i3 4x2.93 RAM: 4 GB network with printers error reaport Hi Philippe,. We are really sorry for all the inconveniences that made you. Try the following steps to check the issue. 1 try resetting preferences Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings. 2. If this help not try to remove all printers from the system one & check. 3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file. At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below: http://helpx.Adobe.com/contact/ Thank you Florian BOOTMGR is missing after you mount the new hard drive I have an acer 6930g laptop using windows vista. My laptop crashed and left the hard drive corrupt / unreadable, so I set up a hard drive again. Hello If you created the backup restore disc complete by using Windows backup and restore, you try to perform the system restore. If you have not created backup disk using restore option, I suggest you to contact the computer manufacturer to restore Windows vista. Warning: When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten. You must regularly back up your files by using the back up files Wizard. For your reference, follow the steps in the link: http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup I created a new library, was asked to analyze media. The original library and the new have been listed. I thought that I had to drag the new desktop to add music. It was a serious mistake. I can't get it back with the other. The two files show 10. GB but we have 5 points and 11 other elements. Most of the music (Christmas) does not appear. The original library and the new have been listed. I thought that I had to drag the new desktop to add music. It was a serious mistake. I can't get it back with the other. The two files show 10. GB but we have 5 points and 11 other elements. Most of the music (Christmas) does not appear. That's where I did not understand your explanation. Registered? Registered where? How is - what drag you a library on the desktop? What is the green dot seen in the monthly magazine on the activity app? It is expected the bubble on the two days when the objectives have been achieved and when they were not. Qosmio X 300 model identification Hello everyone I have a Qosmio X 300, but I can't find the model because my laptop is old and the serial number and model are erased at the bottom... I downloaded the auto-detecteur but it says that there is an error...Any help please? Bridge on E1200 mode disable security? Hello I just bought a router E1200 and used to extend my Verizon FIOS router, so I can join webcams to my my network to view remotely. I have configured the E1200 to be a router bridge and he was given an IP address from my main router. I plugged in model of a few months. Using Bullguard as an anti virus protection. Hello. I need to download the user guide and the guide of the administrator on the OMAFThank youRichardSimilar Questions
After using the restore CD, nothing happened again, any ideas?
I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
Have you installed the OS on the new partition?
http://support.Microsoft.com/kb/309000
http://support.Microsoft.com/kb/313348
You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
If this does not resolve your problem, you may need to replace the print head.
Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
Let me know if this can help, thank you.
C:\ 932 GB
D:\ 28 GB-sized recovery
Currently, to create the system image backup, I have only one option to create the image on the external drive or on D:\
If yes how to create new partition in win.8.1?
2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images
3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\
4. What is-locations of D:\ marked as recovery?
When I start it shows message BOOTMGR is missing.on restart alt f10 not work.i have the 2 dvd backup which I was invited to burn when I first bought computer I tried to load these, but the ability to load backup Hi drive light not so can not click on it. This option is the factory restore and it shows error impossible restoration - reason 0xd000000d. Click ok to restart the computer... and then I am back to BOOTMGR missing again.Maybe you are looking for