Content of the Validator package - Export Server logs-superuser for ssh
I use Validator content pack to publish the contents of the pack. And I was able to publish according to the pop - up screen. The next step he seeks vRLI logs in using ssh. Who needs superuser to be created as shown below doc. However, I am not able to change the password on the console of vCRLI as stated in the RFSO. I can do this on the web interface of vRLI? OR y at - it another way to do it.
The console does ' t even take not the credentials of the administrator which I use for the user WEB interface.
Here, any help would be appreciated.
VMware vCenter Log Insight 1.5 Documentation Center
Hello
I don't know what is the procedure that you follow to set the root password, but please try the following steps. (Assuming that you have never set the root user password)
On the console (CLI) of the master node:
Root of type as username
Press enter
Again, press ENTER.
Now type a new password
And press ENTER.
Retype the new password and press enter
If someone has the installation program this virtual machine for you, you will need to ask them the password of root user, incase they put the password. The root user is on the paralytic and creating a user of root in the web INTERFACE or by using the web interface user admin user will NOT work on the CLI.
If anyone configure the root password does not remember her or you can not access, then you need to reset the root user password by following these steps: (you may have tried this already)
Once you are able to connect as root, you must run the following steps from the command line to collect the data. There is no way to collect the data of the user Web interface LI today.
mkdir /storage/var/buckets; cd /storage/var/buckets; loginsight-dump-repo.sh 3; cd ..; tar cfz buckets.tar.gz buckets
Tags: VMware
Similar Questions
-
Classic scenario: after the bookmark long manual organization Firefox Sync adds trash of its server to my laptop or tablet.
Where can I find how to replace the content of the backup of the server by settings/passwords / current browser bookmarks? Stupid me, I put a new synchronization and lost this ability.
It is not recommended to go back to the old version of Sync
The old version is removed he'll stop being available soon, it takes getting used to using the new version.
IIRC, it is actually possible to force synchronization of the old working with Fx29 & Fx30 using an old profile or preferences of piracy, but I don't think I should encourage users to try this, but it would be better than using an older version of Firefox which is really bad. In fact using an old outdated version of Firefox is so bad, that it is customary to recommend using a browser on alternative day of someone else instead.
Firefox ESR is aimed at corporate users, definitely, at the moment, it will use the synchronization of the former. Who will update soon to use synchronization well again, and this time, I guess the synchronization of the former will probably totally frowned upon for example are not available at all.
It is possible to use the feedback system to leave a short comment on Sync. I would recommend this making, but at least to make very many people of spirit comments that I doubt will have no effect.
- Use https://input.mozilla.org/en-US/feedback
- Display interactive content available here https://input.mozilla.org/en-US/ eg Sync comments
- Use https://input.mozilla.org/en-US/feedback
-
How to set up in the process of report server 11g Linux for destype = mail
Currently, get the error when send the report as an e-mail attachment destype = mail. Is there something missed during the configuration of Mail Server?
REP-50159: distribution to destinations the report generated successfully but failed.
REP-50152: Destination ID ProfitLoss failed with the error an error occurred sending mail: null...
Compose the report via Oracle form with destype = mail, desformat = PDF and [email protected]
Log file: rwserver_diagnostic.log
[2012 05-13 T 17: 04:39.273 + 03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [username: < anonymous >] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000, 1:18567] [APP: reports #11.1.2] REP-50152: an error occurred sending mail: null. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
at oracle.reports.server.MailService.send(MailService.java:588)
at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
at oracle.reports.server.Destination.send(Destination.java:578)
at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500
]]
In order to print the report via Oracle form with destype = CACHE, desformat = PDF.
Mail server parameters are defined.
EM > reports Application Basic Configuration > settings of the e-mail server
Server port Mail Server Mail Server mail user name, password for the mail server key.
Environment:
Server-side:
Oracle Linux 5
Oracle Weblogic Server 10.3.6
Oracle Forms FMW and report 11.1.2
Configure: Current report server
Client side:
Window 7Now, reported problem is resolved, able to send report when destype = mail
Go to EM > Report Server > Admin > Advanced Configuration:
Add this topic "Reports Pluggable Destinations"New name of the Destination: mail
Class: oracle.reports.server.DesMail -
How to activate the validation to phase 2 in oracle11g (for oracle distributed databases)
Hi all
We have three oracle servers(11g) and we need to update the data to a server on the remaining servers. You want to know, is "two phase commit" automatically activated/installed in 11g or must be allowed. If we need to enable it then what are the steps all required them for the same.
Thanks and greetings
RaviIt is always nice to see people think they are so unique that their question has already been answered in the documentation.
Yes, the two-phase commit is enabled.
No, depending on what you want, automatically update the records of one server to other servers is probably a very bad idea, because Oracle has documented of the facilities for this.
You have among other things
-Materialized views
-Oracle StreamsCertainly much better than your approach scale these solutions, because they are asynchronous. In your approach to the master server will slow down due to the update of the slaves.
Approaches need to be avoided in distributed databases 'push' and 'pull' to focus on approaches. That's exactly what materialized views and streams make.----------------
Sybrand Bakker
Senior Oracle DBA -
only main - app.xml and main.swf appear in the content of the apk package list?
I use Flash Builder 4.5 Pro with Flex and Air to create an Android app.
I have a basic, MBR called swf, but I keep my property all in MainAssets. When I start the game in emulation of Android, it works well, but when I go to export, only hand - app.xml and main.swf see.
Now I saw a forum mentioning by dragging the asset in the word bin (I did find an automated process for this yet) and assets appear in project > export Release Build. It is great EXCEPT my camera says that I'm running it in debug? (there appName - Debug is listed as the name of the game).
If I go to file > export and select Release Build, it will build a version of my game HOWEVER as hand - app.xml and main.swf appear, which means no assets, no game.
So, questions:
- Project > export Release Build actually build a release or debug? (I manually install the apks because my camera is bellicose and won't talk about FB)
- How can I get all my files appear in file > export? (I would like to start writing my own xml loader, but if I can't Pack xmls, it's kinda useless)
- Can I automate this process somehow?
Thanks for any help.
I am traditionally a programmer C++ awesomeness automation Flash Pro has done for me in the packaging and test android applications has not compensated for how it was difficult to code.
In the projects that I've been compiling, FB is not copying most of the files in the output folder when I do a project-> export Release Build. Not sure why it does not copy the files during the export. There seems to be a bug in FB who has been around for at least a year or two.
I just worked around this issue for a long time by following these steps:
Project-> Export release build
Click on the button "next".
On your Mac/PC manually go to your project folder and copy your folder full resource (MainAssets in your case by the sound of it) of the CBC to your project folder in your destination folder which should now have been created (for example default bin-release-temp).
In, click the "Finish" button to complete the building of FB.
Hope that helps.
-
How to find the type of Web server is configured for use with ColdFusion
Hello
Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.
Thank you!
You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally
Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server
In fact, you can use this tool to add or remove web servers.
-
Setup error; call to the driver package install returned ERROR 1168 for package
C:\Program files\hp\hpenvy120series\driverstore\pipeline\hpvp109.inf
REQUIRED FILE 'serscan, sys' Windows cd is necessary
type the path where the file & then click ok
copy the file to
C:\Windows\Inf
This all came open when trying to install wireless software and set up the new printer. HP envy 120F-all-in-one model czo22a
my computer came with windows vista home premium and has been upgraded to windows home premium.
I believe that this file was lost during the upgrade because it is found on the new disk to upgrade to windows 7.
up to present hp & Microsoft do not give me an answer
set up the new printer wives without problem Toshiba
If anyone can help me get the missing file give you considerably a ty
Otherwise, I don't know if I'd come back printer?
[Moved from comments]
Hello
1-the place where you paste the file?
2. How do you install the printer driver (CD-ROM or by download online)?
Please download and install the driver from the link and check that it works very well.
Check out the link:
I suggest you to contact HP for assistance. They should be able to help you.
Check out the link:
http://h30499.www3.HP.com/hpeb/
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
vRO workflow crashes with Exception when content Server.log contains ' / ' character
Hello
Just noticed this this weekend and I wanted to check if anyone has a workaround or fix. I have a workflow that uses a call to Server.log for some info for future recordings. However, if the connected content contains a character ' / ' the workflow closes and I get a JDBC exception and the workflow ends.
There is an old post from the community on this topic where it is suggested that this would be fixed in 5.1 vCO. I use 5.5.1
Anyone else seen this?
Maximum length is defined on the database level. It should be 1024 characters for the second argument (optional) Server.log(text,info) and 255 characters for the first argument.
I don't think it is documented in the API Explorer.
-
"windows cannot find a driver" in the installation package?
We have a file server and print XP on our network that has a printer Series PCL LaserJet 3330 installed 5th (using the original installation CD and prints from the XP Server). While trying to install the printer on a remote computer, I downloaded the driver package Windows 7 64 bit for the printer on the computer remote and got the error: «Windows cannot find a driver...» "(I don't understand why the pilot was not as it should be in the installation package.) After getting this error - several times, including the re - download the package and re - try - I downloaded the XP Server installation package and I changed the printer driver it as a package to install downloaded for XP. We always get the same error. The installation of the printer worked fine before having to redo our BONES. Anyone know this problem and can help with this?
This issue is between 64 bit and 32 bit, and there is an easy solution. Once you get back to the way it was before you downloaded the 64-bit package that you go to the machine that you want to load the printer and the printer as a local printer using load say lpt1 port. Auto not detect or print a test page and just finished the installation. Now on the windows 7 computer to join devices and printers and right click on the printer icon and scroll the properties first and left click. Go to the ports, and then add the port and in the box that comes up to put in the name of printserver and the share name of the printer by using the syntax \\printserver\sharename how save and apply and this computer will now be able to print to the printer.
-
How to create the TCP non-blocking server?
Hello
I would like to have a TCP server at my request. It will go about their business as usual, but in the background a TCP server sits waiting for a client connection. If such a link exists, the normal code will send stuff on this topic otherwise it will just not send. Currently, I do not see how to stop this blocking while it waits for a client (block waiting on TCP listener). I looked at the example of client/server TCP, but it remains blocked in the same way.
I would like advice on how I'm framing such a request. I also want to do the same on the client side. Go about business as usual and if a connection can be established at a time given, then send stuff on that connection otherwise just not worth it.
Concerning
Ashley
LabVIEW parallel code usually runs in parallel. This is true even a wait - if inside a loop, you wait 100ms and other code in parallel, it is not delay execution of other code, rather he runs forward and the other code at the same time. When both have completed, the loop can proceed to the next iteration. So yes, if you have a loop with a 1000ms wait and another with an expectation of 100 ms and waits take longer to execute any parallel code in loops, then the loop of 100ms will last about 10 times as many times as the loop with the 1000ms wait.
I recommend that you put the waiting on the listener in a separate loop and also have another parallel loop that manages the communication when the connection is established. You can then use a timeout (forever) of-1 on waiting on the listener, and this loop will be almost never run or use resources except what is first of all establish a connection. To kill this loop, close the listener somewhere which depends on waiting on execution of the listener. When a new connection is established, put the link in a queue, where the communications loop can pick it up.
-
Hi gurus,
Is it possible to display the scroll bar on each tab on Web tab page where the display of content from the same block of data?
for example:
Block of data elements used:
1. employee ID
2. first name
3 first name
4 date of hire
scroll bar appears on the page 1
5 salary
6 commission
scroll bar appears on page 2
Many thanks in advance,
Kind regards
Ferrere
Dear fendy_chang,
A data block can have only 1 scroll bar. If the form is for display purpose, you can create several data bloks that points to the same table for each tab.
Manu.
-
Use the button submit to trigger the validation and prompt to save instead of submit action
I want to add a Submit button that will trigger the validation using the built-in functionality. This will work as well with the "validation of forms" setting on the properties of the form. See cliché below.
However, if the validation success, I want to apply for registration dialog box instead actually submit the form using this line of code:
app.execMenuItem("SaveAs");
How is that possible?
Tarek
Hello
to do this, you can simply call the function execValidate integrated, your form by using the following:
var boValidate = xfa.form.form1.execValidate ();
If {(boValidate)
app.execMenuItem ("SaveAs");
} else {}
App.Alert ("Validation failed.");
}
I hope this will help you!
-
Need the value of exports in another form field
I have a few menus each with unique export for each drop-down selection value.
I need to have the value of exports as an entry for another form filed once a choice is made.
E.g.
Drop-down menu:
Choice1-> export-> value
Lendemain2-> export-> B value
3-> export-> C value choice
Choice4-> export-> D value
Filed entry form will be one of the chosen export values.
Any ideas to make...
Use this code as the calculation script customized to the text field (adjust the name of the drop-down list):
Event.Value = this.getField("Dropdown1").value;
-
Download the rpm package for the installation of the database
Hello
Please someone give me the link to download the following packages to install database 11g for linux redhat 4.2...
binutils - 2.15.92.0.2 - 18
compat-libstdc ++ - 33.2.3 - 47, 3
elfutils-libelf-0, 97-5
elfutils-libelf-devel-0, 97-5
3.4.5 - gcc-2
GCC - c++ - 3.4.5 - 2
glibc - 2.3.4 - 2.19
glibc-common - 2.3.4 - 2.19
glibc-devel - 2.3.4 - 2.19
glibc-headers - 2.3.4 - 2.19
libaio-devel - 0.3.105 - 2
libaio - 0.3.105 - 2
3.4.5 - libgcc
libstdc ++ - 3.4.5 - 2
libstdc ++ - devel - 3.4.5 - 2
Make-3, 80-5
numactl - 0.6.4.i386
SYSSTAT - 5.0.5
My current database version is 10.2.0.3.0
Thank you
VerhasseltSalvation;
Force option also not working,
I suggest you remove RPM libstdc ++ - 4.1.1 - 52 and then install the required.
If I omit this rpm for installation package. ??.
What version of this rmp? Please run below command:
RPM - qa - queryformat "% {NAME}-%{VERSION}.%{RELEASE} ({ARCH} %) \n" | grep libstdc ++.
Respect of
HELIOS -
the root account not working for vSphere Client 5.5, for SSH works fine
Hey.
I got this:
I can connect to vCenter 5.5 by SSH and the root user and password works fine
I can connect to vCenter 5.5 by vSphere Client and use domain user and everything works fine
I cant't connection 5.5 by user of vSphere vCenter Client and use of root and the password. I have information on
"Cannot complete the connection because username or password incorect.
IM shure I use the right password for root.
A suggestion?
Ok. Thank you community vExpert and Lukasz of my team, we found easy reason perhaps, but not at the first glance for me
We had the installer by default "Source of identity" for Active Directory then when I used only root for connection I got the error with wrong password.
In this possible case is just to connect to vcenter using root@localos credintials.
But in addition we sam of similar mistakes inside the SSO connects:
/var/log/VMware/SSO/VMware-STS-idmd.log
2016 06-21 13:57:31, ERROR 142 [IdentityManager] could not authenticate [root] main tenant [vsphere.local]
javax.security.auth.login.LoginException: failed connection
at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.authenticate(LdapWithAdMappingsProvider.java:327)
at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2412)
at sun.reflect.GeneratedMethodAccessor24.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)
to sun.rmi.transport.Transport$ 1.run (unknown Source)
to sun.rmi.transport.Transport$ 1.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at sun.rmi.transport.Transport.serviceCall (unknown Source)
at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
at java.lang.Thread.run (unknown Source)
Caused by: com.vmware.identity.idm.InvalidPrincipalException: could not find the main id: {name: root domain: OurAdDomain.local}
at com.vmware.identity.idm.server.provider.BaseLdapProvider.findAccountLdapEntry(BaseLdapProvider.java:543)
at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.getUserDN(LdapWithAdMappingsProvider.java:1715)
at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.authenticate(LdapWithAdMappingsProvider.java:323)
... 15 more
2016-06-21 13:57:31, 144 ERROR [IdentityManager] failed to main checkUserAccountFlags [root] for tenant [vsphere.local]
"2016-06-21 13:57:31, 144 exception ERROR [ServerUtils] ' com.vmware.identity.idm.IDMLoginException: the connection has failed.
com.vmware.identity.idm.IDMLoginException: failed connection
at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2481)
at sun.reflect.GeneratedMethodAccessor24.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)
to sun.rmi.transport.Transport$ 1.run (unknown Source)
to sun.rmi.transport.Transport$ 1.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at sun.rmi.transport.Transport.serviceCall (unknown Source)
at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
at java.lang.Thread.run (unknown Source)
2016-06-21 13:57:31, 144 INFO [IdentityManager] authentication failed for user [root] the tenant [vsphere.local] in milliseconds [4]
When I used the credentials with appropriate domain name:
root@localos we received newspapers below:
2016-06-21 14:11:58, 971 INFO [LinuxNativeAuthDbAdapter] [root] user authentication
2016-06-21 14:11:58, 974 INFO [IdentityManager] authentication successful for the user [root@localos] [vsphere.local] tenant in milliseconds [3]
2016-06-21 14:11:58, 984 INFO [LinuxNativeAuthDbAdapter] to get local groups for the [root] user. Recursive? [Yes]
When I temporary switch the source of identity - "localos" and use the root account to log logs below, we received and I connected without problem:
2016-06-21 14:14:37, 545 INFO [LinuxNativeAuthDbAdapter] [root] user authentication
2016-06-21 14:14:37, 549 INFO [IdentityManager] authentication successful for the user [root] the tenant [vsphere.local] in milliseconds [4]
2016-06-21 14:14:37, 564 INFO [LinuxNativeAuthDbAdapter] to get local groups for the [root] user. Recursive? [Yes]
Now, for me, more clearly
Once again thank you
Sebastian
Maybe you are looking for
-
Curious about operating a business on Mac Mini
Hello I want to start a debate (I hope a good). I am a serial entrepreneur but my goal set on IT Support for the past two years. I used a combination of devices on this time, but more recently, an Early 2011 MacBook Pro 15 "(mis à jour depuis 4Go RAM
-
Talk to the Apple Store of my restriction code
I'm trying to get my 4-digit restriction code
-
The installation of Vista Service Pack 2 failed
I had been facing a blue screen often enough lately when I downloaded the SP2. Windows has responded by "Windows can check the bluescreen the next time u log" but he wouldn't do anything. After downloading steps 1 and 2 were full. Step 3 0% would com
-
When you try to install AVG, receive error code oxc0070643
Cannot install download avg new version. Get an error saying windows can run in safe mode. I get an error code oxc0070643 States windows installer could not be accessed * original title - windows installer could not I consulted. try to download the a
-
How to change My Community email address
How can I change the email address attached in my community?