continuous reboot on updates
computer market this morning 05/09/09 he went to restart, but before the sign on the page, it came with microsoft update, part 3, and it is located but goes into reboot over and over again. I tried to go without failure, but kick back to the update 3 times, part computer tirns and repeated everywhere. I tried to restore, but it refers only to the extent where the update, no other. What I have to do. I select all updates to go, it's only 32 bit, available for download only, no updates are expected to come out in with my permission
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your falls into the above category: download the ISO on the provided link and do a repair of the disc.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
PowerConnect 3448P continuous reboot
I have two switches to PC3448P. That I've updated the bios and firmware no problem. The other, something must have been corrupted during the update process - the switch is stuck in a continuous reboot. The documentation that came with the latest firmware says:
If you try to upgrade from 1.0.1.13 or below, please
version of the software that 2.0.0.34 is downloaded on the PowerConnect switch
34XX series, as well as the new version of startup code 1.0.1.01. New firmware
and the new startup code must be updated at the same time. Failed to download
the new bootcode translates the system to reboot continuously. This
It will take a XMODEM from the previous version of the software download
(PowerConnect_34XX - 10113.ros) using XMODEM and the Start Menu for
recover.
I need to get a copy of the firmware "PowerConnect_34XX - 10113.ros" file to try to restore this switch to a working state, but I cannot fid anywhere. Can you tell me a download of this file?
Hello
Try this link http://downloads.dell.com/network/PC_34XX_v10113_A05_Firmware.zip
-
should software apps has continued to be updated if El Capitan is not instauled?
I have a MBP mid 2010 OS X 10.10.5 and you want to upgrade to El Capitan. Should / can I continue to update applications like iTunes... ?
Some applications will continue to get the updates after the Mac OS X version has been replaced, then Yes you continue to get updates iTunes for some time yet and will be able to run the latest version which includes support for the latest iPhone and iPad models.
Other applications Keynote, Pages, Numbers, iMovie can stop making updates as soon as possible. I am aware that these are always updated to Yosemite.
A good rule of thumb is that the current operating system (now El Capitan) is of course updates and operating system previous now Yosemite will also get updates for its applications and even that until now the Mavericks will always get updates but the one that precedes that which is Mountain Lion could not.
According to Apple's site, the latest version of iTunes requires 10.8.5 or more late i.e. Cougar 10.8.5 or later version.
-
Satellite L300D BSOD on reboot after updates to Win7 64 bit
Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.
I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
I'm open to good ideas.Thanks much for this information.
Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problemsWelcome.
-
Help me please, my phone continuous reboot loop. This problem starts at 00:00 hours, I don't know what to do
Hi miltonjhon,
Welcome to the community! Since you are new, please make sure that you have checked our Forum.
Try to remove the SIM card from his cell phone and then restart it, leave the SIM card and see if the problem persists, if it stops then the SIM card is causing the problem.
-
BlackBerry Torch 9800 Smartphones continuous reboot cycle
Please can you help me? My Torch 9800 is stuck in a continuous reboot cycle. Press and hold the return key does not it in safe mode and my Office Manager does not even recognize the existence of the phone. Please can someone tell me how can I recover the situation?
Hello
Given what you describe, you should probably use these more drastic repair attempts:
- KB10144 How to force detect the BlackBerry smartphone using the Application Loader
- KB27956 How to recover a BlackBerry smartphone from any State
- http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry
I hope you have a good backup, because in this case it is usually not possible to take one now.
Good luck!
-
I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. How to do the update?
Direct updates
----------------- -
Computer in a loop of continuous reboot after Windows update
Original title: serious windows update conflicts with the software driver reinstallation
I just did a clean reinstall of windows family basic on my dell vostro 1400 using the reinstallation cd (I don't have the driver cd). Later, I was able to install the drivers using another computer to transfer driver software from the usb and a usb port on my laptop. I got more than 100 different windows updates to be performed. About 74 or 80 there were errors... unfortunately I do not have these error codes... but they were basically telling me to just install the updates at this point. I did so, restarted my computer and tried to install the rest. The process got as much as to restart my computer and would not get to the login page, but continued to restart over and over again. I did a computer repair through the reinstallation cd who told me that he could not find any solution except to perform a restore of the system. I did it, I tried the process with tent install updates 5 first (5 at the bottom of the list - they have been "recommended" and not 'important'). Anyway, tried and the same thing happened. I'm guessing that I have is one of these updates, but in the log details of the computer repair, he said it may be related to hardware or software driver problems. Any help?
Hi Jonathan,.
You are able to start the computer in safe mode?
I suggest that allows you to view update history to see which update might be the cause of the problem.
(a) open Windows Update by clicking Start , all programs, and then Windows Update.
(b) in the left pane, click view update history.
(c) to display more information about an update with the error message, double-click it.
Once you know that Update KB number you can uninstall the update and then try to restart the computer and check if it helps.
The problems with the removal of updates
http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-problems-with-removing-updates
Method 1:
You can also perform a startup repair and check.
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-CA/Windows-Vista/startup-repair-frequently-asked-questions
Method 2:
I also suggest to go through the steps from the link provided and check.
Repairs to the system of Windows recovery environment
Hope this helps and let us know if you need more assistance.
-
I recently downloaded an "update" to the computer of my son (who is from Vista Premium), the system is locked on the 3 of 3 update - system poster not didn't any what more than 0% finished and restarts constantly on & above. I can't seem to break the chain of the system update & I don't have a recovery disk. All that I can do rather than scrap the computer?
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
Method 2: Start the computer in safe mode and then use the system restore feature -
Help! My PC won't reboot after update of Internet Explorer 9 on the Visa!
I installed Internet Explorer 9 - update my PC. Installation took forever to download, I have to disable my firewall. On the "reboot" the system is stuck in a loop... my PC will (or may) not get on the desktop after HOURS of trying to restart, I keep getting a "configuration to install...". Step 3 of 3-0% complete. Do not turn off your computer. 0% after 4 HOURS! Help, please!
Microsoft offers for home users telephone support without charge for IE9 install and uninstall issues. Alternatively, you can get telephone assistance if your problem causes your computer fails or if IE9 won't let you browse all the sites. In the United States and CA, call (800) 642-7676.
Non-US/CA residents may see this page: https://support.microsoft.com/oas/default.aspx?&gprid=15672
TIP: Select the option I use it for my own personal use , and then click on continue.
-
continuous reboot of failed reset
I had a broken screen and has been using the laptop with HDMI to my TV screen. I tried to reset the original hard drive to get rid of excess software and virus potential because he was slow. I didn't know that the computer would not automatically recognize the HDMI connected display. Then when I started rebooting, I lost the screen and couldn't do anything. I bought and installed a replacement screen that seems to work very well, but all I get is the white screen with the HP logo in the middle and a continuous restart loop. What can I do?
Hello
Can you post back with the full model number and your cell phone Nr - see here for a guide to the location of such information.
Kind regards
DP - K
-
iPhone 5s stuck in a continuous reboot loop
My 5s iPhone has always been great. IOS is underway. My daughter used it yesterday evening at the stream of Pandora, but had finished and he's just sitting there. He started a continuous restart loop. I tried hard reboot (still a few cycles) and I tried to plug it into my laptop to synchronize with iTunes (never, give me the chance to enter my code to access, but iTunes gives me error that I did not enter my access code). I also leave the battery to choke and then restarted, but it's always just. I looked for answers and all seem to focus on the fact that this is happening for iPhones that have been jailbroken, but I has never been jailbroken.
If your iOS device restarts or the unexpected poster - Support Apple Apple logo
-
Satellite A200 restarts continuously after Windows update
Hey all,.
The model Satellite A200 - 1 GB (PSAE6E) worked perfectly for two years now (with Vista 32-bit).
Since running windows update yesterday and restart, the laptop summer stuck in a reboot loop, restart immediately after the 'POST' (the Toshiba logo, etc) screen with a flash of blue screen.
Holding F8 to read the message, it says INACCESSIBLE_BOOT_DEVICE (0x000007B)...
Try to restore to a point before the blackout failed for an unknown reason (gave an error).
Search in Google gave a possible cause - maybe the hard disk driver was changed by an incompatible type. There were some suggestions to turn off the AHCI in the bios, but it doesn't have this option.
The bios was not updated since purchase (this is version 1.4), but I can't update because it seems that the only update provided by Toshiba requires windows.Someone has any idea how to fix the computer without having to reinstall windows? No matter what?
Thanks in advance,
OfirHello
I doubt that it could be a hardware error (my personal opinion) but nothing is impossible, that you know
The fact is that a BSOD can be caused by hardware error, but also a serious software problem
In my opinion, something went wrong during the updateIf you are not able to boot the operating system even by using a safe mode then a new install of the OS would be the last chance to get this sort problem
I think you should try a new installation to see if this could be a hardware problem because there is a small remnant of risk that this could be a hardware problem
-
constant reboot to update iOS 9.2.1 now won't restart
Following the update of ios this morning - I guess it was the 9.2.1 above, the phone began to continually restart.
After a few hours of this restart, I looked at communities. I have first tried required top off down the button for 10 seconds. This does not.
Then I tried now on and the button home for 10 seconds. This has prevented constant restarting. However now the phone will not turn on. When you press on and little second hold the start stop to start the phone the apple symbol comes on but after say 10 seconds it goes off and then nothing. Tried a few times.
Current status is phone seems to be totally turned off.
PS phone was connected to the power during the update process.
Any ideas anyone? Thank you.
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.
More info here:
https://support.Apple.com/en-us/HT201263
If these steps do not work, contact Apple and ask for help.
Maybe you are looking for
-
12.5.1 iTunes for the version of older video cards will be deployed?
My iTunes version 12.4.3.1 don't is not upgraded to 12.5.1 because it is the 32-bit version aka "for older video cards. 12.5.1 for older versions of cards video ever be used? Apple's declining support for this version?
-
Re: Satellite A200 - lights ever time!
My TOSHIBA Satellite A200 doesn't want to turn on every time sometimes it round after 10 attempts the blue icon Satellite lights every time.Any idea what's wrong with it?
-
Recently, I bought an IBM Net Vista original case, a site auction like eBay, but for my country (Serbia). It came with a sticker with a windows XP Professional license print top (with all holograms too, so I think this is authentic). All components i
-
My computer is a "hp pavilion xt958.
-
Vista Ultimate 64-bit back to 32-bit
I want to change my OS Vista Ultimate 64-bit (I chose this facility when I did the upgrade from Vista Home Premium) back to Vista Ultimate 32 bit. Is there a way of eay to do this?