Control chart cursor with keyboard

Similar Questions

• Chart stacked with cursors that extends to all parcels

  I use LabView 2009 9.0f3 (32-bit)... I want to create a chart stacked with two sliders that extends to all plots. I can only find the graphic stacked option but not graphic, and I don't know how to create cursors that spans all of the plots. Attach a picture that my college created showing what I want to achieve.

  Thank you

  You can create a table of locations (remember to group, place them in a cluster first!).

  Because the properties are identical to the elements of the array, the positions of the cursor will be the same for all the graphs, whichever one you are moving.

  

• two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

  two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

  When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

  OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

  Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

  Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

  Please post back with your results, thank you!

• Satellite Pro A100 - recovery mode sleep with keyboard or media remote

  Hi guys

  I have devoted my Satellite Pro A100 to be a media center which is located under the TV and can play media network and DVD etc..
  It is using Vista.

  I want to set up, is that the lid is closed 24/7 365 days and when I want to use I just press "SLEEP" or power button on the remote control or the keyboard and it fires up ready for action.

  POINT TO THE NOTE. I did it successfully with my OLD Tecra M3. However, was too slow for vista and media center

  However, I put the power settings I want etc, close the cover nothing and activated standby hybrid (favorite sleep).

  Now I CAN put it to sleep with the remote control or the multimedia keyboard. BUT I can wake up?... NO!. I thought about everything... went to the Device Manager and made sure that all the options for the remote control and keyboard and USB receiver are set to WAKE FROM SLEEP. The only thing to wake up it is the power button - which defeats the purpose of it sitting there like a dvd player.

  awake when the remote control and keyboard function very well - I made sure that the batteries are charged.
  I have the latest version of the BIOS and speaking of BIOS there is no option power S3 I noticed, but then there were not on the M3 and it worked very well in terms of sleep and wake up with the IR.

  I come to the forum because even though I know that some older systems will not work with vista - IF the M3 will work - I'm sure that the A100 twice as new and powerful.

  Has anyone had this before - that I missed it must look me in the face.

  Thanks in advance.

  PS Also lately the touchpad played upward IE left and right clickers Exchange feature so one second your work as normal the next minute you click left and right clikc menu appears. Reset the synaptic reinstalled - rebuilt - BIOS - no difference.

  When I worked in management for a large company when it started happening was not good news - it's a bad news?

  Hello

  I m not very well why it doesn t on your Satellite Pro A100 and why it works on M3.
  But the fact is that the Satellite Pro A100 doesn t support the FIR (Fast InfraRed) port and the
  Tecra M3 supports the fast infrared port.

  Maybe this could be the reason why you can not activate the laptop using the infrared remote control multimedia.

  Welcome them

• Control chart SPC not showing CL UCL or LCL

  Hi people,

  I have a spc control chart in my application.  However for some reason any of the UCL, CL and LCL are not displayed on my chart.

  A brief review of the facts:

  This is an application for people who enter the measurement data in several numberboxes the average that goes on the chart.  These figures vary generally from 32.0 to 28.0

  UCL is 30.6 the CL at 30 and LCL 29.4 However none of these values are showing on the chart.

  Someone used this command and find out why, I'm having a problem here?

  Rik

  Hey Rik,

  I just had a quick play with this contorl and have had no problem to show the limits.

  

  I have attached the VI below, have a play and see if it works.

  John

• You want to exit sleep mode computer with keyboard and mouse.

  Original title: waking from sleep with keyboard and mouse

  IM on a newer dell, the thing is that it does not start unless I press the power button when im in mode 'sleep' I need to start from the keyboard and mouse is there something like this in the control panel under xp?

  Hello

  You can follow this link & check if the problem persists:

  To resolve this issue, follow these steps:

  a. click Start, click run, type control keyboard and then click OK. Open the keyboard Control Panel item.

  b. click on the hardware tab, and then click Properties.

  c. click the Edit settings button
  Note This step requires administrator access.

  d. click the power management tab and check that allow it this device to wake the computer is turned on.

  e. click OK, and then click OK again.

  Hope the helps of information.

• Mobile Firefox does not allow typing of national symbols with keyboard external usb.

  I use Asus PadFone with his keyboard native-station dock. When I try to enter text on a web page text field my keyboard is set to English. This does not happen when I write text in Firefox's search/url field. Tested with keyboard Russian and Lithuanian - it makes no difference. I can write national symbols with keyboard on the screen.
  There is no such problems with other browsers, so it is something with Firefox.

  Https://bugzilla.mozilla.org/show_bug.cgi?id=669361 tomorrow looks like Firefox nightly build may have a fix for this. You can try the build at http://nightly.mozilla.org

• Satellite A660 - upgrade with keyboard backlight

  I have a Toshiba Satellite A660-141. Initially, it was without backlid keyboard, but I recently bot a replacement with feature backlit for my laptop, but when I connect all backlit do not work... Can someone help me to activate it? All the world has the same replacement?

  http://1drv.Ms/1grM9M8

  Hello

  I have this model of laptop, but AFAIK this light in the BIOS option is for function buttons. With this option, you can enable/disable illumination for these buttons.
  In my opinion it has nothing to do with the keyboard.
  Mobile phones with keyboard backlit have BIOS option for keyboard only and you don't have it so I think that it is not supported by the BIOS and upgrade is not possible.

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Satellite M50-130 with keyboard problem

  When my Satellite M50 starts, typing in the password box is not a problem, the sound when I reach this point and try to type in word or in internet explore or play a game.
  The same key cannot be presses twice in a row. For example, to type WWW I must press W, wait a second, then press W again and so on, otherwise it only type 1 W.

  The same thing with all the keys and I can not play with the arrow keys as you can not, for example, not side twice in a game as I have the same m key in quick succession.

  Any ideas? Cheers, Jim

  Hello Jim

  My colleague from work the same As model of mobile and he uses it to Web design and type a few codes to our database. From time to time, I'm sitting near his office and several times I looked at what he do exactly. Believe me that there are no such problems.

  It is important to say that his book is preinstalled with recovery image and slightly modified for our enterprise security needs.

  Can you please tell us since when you noticed this problem with keyboard? Are you also using recovery image and have you ever tried to fix this somehow? Have you noticed any other strange questions about your Satellite phone as a disk busy, high utilization of the processor or something similar?

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• Problem control pumps syringe with LabVIEW 2013

  Hi all

  I try to use a program that was sent to me by a coworker to control 2 pumps to KD scientific syringe using LabVIEW.  The pumps are connected to a Windows 7 computer via a telephone line attached to the pump, which is then connected to an RJ11 to D - type RS-232 converter.  A Hawking Technology RS-232 to USB converter cable connects this converter to a USB port on the computer (this is because our computer has only 1 serial port but we have 2 syringe pumps).  It's the same establishment that has been using my collaborator and it worked without any problem.

  The problem arises when we try to control pumps syringe with the LabVIEW program.  We have drivers for Hawking and KD scientific syringe pumps cables installed on the computer, but our computer recognizes that the cable is plugged in - it does not recognize the syringe pushes like a 'peripheral '.  We can run the LabVIEW program, but essentially, nothing happens.  When we press "stop"button, we get an error message that says: "error 1073807202 occurred when opening VISA in Science KD 2XX series Initializes vi."  In my view, this means that the computer/LabVIEW is not able to communicate with the pumps, even if we have installed the drivers and in the same folder as the program.

  I enclose the program we are trying to run (it's Version 2, it includes the drivers for syringe pumps), the pilot shot of the error message, we installed the cable, as well as a screen.  If anyone knows anything we can try would be much appreciated.  The author of the program has been at a loss because it works wonders on his computer.

  Thank you in advance!

  Laura

  Indeed, I am convinced that the pumps are connected to the correct COM ports.  So I just thought of something... I noticed on the website OR that there are drivers for NI-VISA.  I know for a fact that I have not installed on this particular computer.  Does make sense that these missing drivers could be the problem?  That would explain the error to the opened VISA.  I do not have the administrator rights for this computer so I have to wait for an admin to connect and install the drivers.  I'll give you an update with what's happening.  Thank you all!

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• Change the problem of direction of the cursor with new 2nd monitor

  original title: problem of direction of the cursor with new 2nd monitor

  I just added a 2nd monitor to my computer. The 2nd monitor is left of my laptop but I have to move the cursor to the right in order to get on the new monitor. How can I change so I can just move my cursor to the left and get it on my new 2nd monitor?

  Right-click on the desktop and then clicking display settings by clicking Customize to open the display settings. In the display settings box, click and drag the image to the monitor 2 to the left of the screen 1. Click on the button apply, then check. Click Ok to exit.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html