Intermittent operation (especially just a power indicator light flashes) on WRT-150N

Anyone know if these symptoms mean that my router is dead all just please? It runs for about a week or two and then the power light flashes quickly. It is then assigns IPs constantly, whenever I have try refreshing the DNCP on my Mac (or Linux).

I can get it to keep the constant power indicator by pressing reset while you insert the power supply plug, but then it sets itself simply IPs again.

It broadcasts its radio very well at all times.

Connect to it with a Mac just translates what OSX calls a 'time of connection' which seems to be MacSpeak for ' we tried connecting but your router is assigning its IP address, so we used to bother Cuatros "cos you will not be able to use this connection"

If I leave it off for a few weeks, I can connect again, and sometimes it works fine but only for a week or two. Then the power light flashes and it will not assign an IP address most.

It doesn't have the latest firmware, but it SEEMS a little more like a hardware problem than a firmware the firmware seems to be working fine when I connect it on the occasions where it runs correctly.

It would seem that the problem is indeed with the router. Try to perform a 30-30-30 reset and then check if the router will have now a stable performance. In case the router still does not work, then you can either: contact technical support for assistance or to replace the router with a new one.

Tags: Linksys Routers

Similar Questions

  • Mode low power - indicator light flashes

    Hello

    Could you please tell me if this is normal whereas my printer (HP LaserJet Pro 100 color MFP M175nw)

    is in low power mode after auto power down, the light will blink endlesly?

    Can I turn off the light somehow?

    Thanks in advance

    Hi @Viktor_Cs ,

    I see you want to know if the light should blink when the printer is in low power. I can help you with this.

    I think that the printer will keep flashing when the printer is in mode low power, to indicate that the printer is not extinguished. The printer will return to a State loan when it receives a wake event. No options to turn the flashing off the coast.

    I hope this helps.

    Have a wonderful day!
    Thank you.

  • Indicator light flashes yellow.

    The light - usually green and steady - hand flashes yellow. A Wi - fi connection is always connected.

    The yellow light flashes when the airport router has a message for you.

    Find out why the yellow light flashes when opening the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

    Click on the image of the AirPort Extreme

    You see a button update?  If so, click on it

    Otherwise, find the status setting and click on the little orange dot it for more information

  • Laptop does not - the power adapter light flashes three times? G62 b29SA

    I was replacing the fan in my friend's laptop computer. I had a problem with the trackpad works not once I put back it together and this problem is not yet solved, but I have another problem that prevents me from getting more. Now when I press the button, the light power adapter (next to the socket for external power) flashes three times and that's it. It flashes three times, whenever I press the power button. It does this even with a connected external power supply (I'm sure it's supposed to just stay on constantly when the charger is plugged in but the power source I have is a universal set of one to 19 V - he was fed up with this trendy before but I don't know if it was taken in charge of it). Any advice?

    I have the charger of my friend and now it starts very well. There seems to be a lot of sense for the three flashes based on my Internet research, but in this case, it seems that it is a way to indicate a low battery.

  • indicator light flashes, but there's no docs in the queue; Cannot print

    I have a Color LaserJet CP1025nw printer.  The 'ready' light has been constantly flashes throughout the day.  I can't print anything of any program.  It seems that when I try to print, everything goes smoothly, the doc still appears in the queue of print with the status "printing" but nothing no is displayed. So I canceled all documents pending, so that there is nothing in the queue, but always flashes. Flashing must indicate that the printer is receiving or processing data, but there is no docs in the queue.

    I tried to turn off the printer, wait 10 minutes and turn it back on again; also tried to restart the printer and the computer. also made sure all the cables were connected the printer to the computer; also tried opening and closing the upper part and he had to scroll through all the lights; also crossed the convenience store help and tried to print at a command prompt... nothing has worked so far.

    Help!

    SOLVED!

    Thanks to an old post here, I learned that I could try to do a hard reset.  SO I did a hard reset and the printer works now! Perhaps there was a doc stuck in the memory of the printer and it could not go beyond it?...

    For the hard reset, while the printer is turned on, unplug the power cord and cable, wait at least 30 seconds, and then plug them back in and turn on the printer.

  • Control number of the indicator light flashes

    Hey

    I did a VI that will make a flashing LED, now I just need to improve the program, so I can control the number of flashes by typing a number by using a rotating dial. And that's where I'm stuck... Anyone who can help me.

    Here is a modification of your VI to have a wheel to set the number of flashes and a run button to launch the hot flashes.

    Use the stop button to terminate the program.

  • HP Deskjet Ink Advantage 3545: Wireless indicator light flashing even though I can connect

    I can connect my laptop to the direct wifi printer. Can also print via wifi direct. But the wireless next to the wifi button light keeps blinking during the whole process of connecting laptop to print. Is correct because I was expecting light remains constant?

    Hello

    Wireless light should blink in this scenario, which is by design.

    Wireless light refers to a connection to the printer to an access point or router.

    Direct wireless connection should not affect the light wireless, a connection to a router...

  • HP pavilion dv6 light flashing no power

    Hi guys, my laptop fell as 3 feet off the bed and now won't charge or turn on. When I plug in the power cord, the light flashes quickly. It is a white color led flashes. What it means that the manual has only white, orange and flashing orange options. I tried to just use the battery and it does not illuminate. Also tried the hard reset when you press and hold power for 30 sec to 1 min. Any solutions would be appreciated. Thank you!

    Hello



    Thank you for the information. For battery light blinks several times, I have included the following document 'computer does not start and the lights blink or computer beeps. Once you have the link open, click on power battery light flashes and follow the steps.



    The second document I've included is 'computer won't start (Windows 7, Vista, XP)'. Once you do not have the document open, click the symptom that is to have your computer and follow the steps in order.



    The last document I've included is, "battery Does not portable computer power or hold a Charge. This will take you through the different options of battery test, power supply and motherboard.



    Please let me know if you are able to turn on the laptop after this, thank you.

  • 32D1334B LCD TV - not light power light flashes red & Green

    I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
    When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

    I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

    I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

    Thanks in advance.

    If you find out how to fix it please let me know because my tv is the same.chris

  • 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

    With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

    Hi @joshuaj21,

    Welcome to the HP Forum!

    It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

    I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

    Please let me know the results.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

  • Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

    Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

    Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

  • Satelite L775 used high power - orange light blinks 5 times

    Greetings,

    I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

    This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

    My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

    I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

    A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

    I can't afford to send my Toshiba for 2 weeks, not immediately.

    Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

    Disconnect the battery and press power for 30 seconds
    Unplug the adapter and press power for 30 seconds
    Disconnect the battery and the adapter and press power for 30 seconds

    (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

    I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

    I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

    One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
    I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

    Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

    The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

    Thanks for the time and help!

    Hi a8000

    Looks like you already tried all possible solutions
    The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
    However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

  • Lenovo B590 Orange laptop power light flashing

    Hello

    Recently, I noticed that my B590 Lenovo laptop indicator light was flashing orange. I tried to restart the notebook and by ensuring that all the plugs are secure, but nothing is indeed it. That means the power light flashes average orange?

    ~ Laila

    Hello

    Just wanted to give an update on this issue, in case someone else runs into a similar situation. As I said, I'm under market entirely adapter. I found that the old ground had not been eradicated because if you go out without replacing, it leaves a gaping hole in your laptop!

    I solved the problem of blinky light orange by disconnecting the battery, but leaving so much, with little electrical tape, to hold it in place that it will protect the pins bit inside battery - thanks for the link to the manual, it is also useful.

    Mahalo,

    ~ Laila

  • Satellite X 200 PSPBUA - no power, no lights, dead!

    Hello

    I don't know if anyone can help, but about 2 weeks ago my laptop died, just turned off.
    There is NO lights at all, and nothing happens when you press the "on" button

    There is 19,42 volts, measured on the motherboard of the adapter.
    I replaced the battery and motherboard and it remains dead.

    I removed the disks and memory and the optical drive - still dead.

    Any help to restore this laptop great would be appreciated

    Thank you Ray - aka mihd

    > I have replaced the battery and the motherboard and it remains dead.

    Are you sure that the new motherboard is ok?
    There is not a lot of parts that may be affected: motherboard, CPU or RAM
    If one of these parts is faulty, the laptop will not light.
    But usually the power light flashes even if the CPU or memory would be dysfunctional.

    In my opinion this motherboard problem, but who knows without a hardware check the person cannot say exactly what could be wrong here.

  • Portege Z830-10F no display - power light flashes

    Hello

    I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
    What it means?

    (PC was left alone in the night on table)
    I try to disconnect the battery and load without it, it did not help.

    Indicator DC IN (first on the left):
    Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

    ((Deuxieme power light to the left):
    Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

    Also try this.
    Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
    Now connect the battery and AC adapter and turn on the device.

Maybe you are looking for

  • How can I REMOVE Pocket ENTIRELY without a master's degree in computer science?

    Thanks to the Pocket being on my PC, I'm stuck with e-mails from the provider even after contact with the same directly and have been assured that my email address would be deleted. With reliability like that, I want to remove Pocket even MORE and no

  • How to print without taken adobe supported?

    How can I print if adobe is no longer supported?

  • Why we cannot get 2.3 (Gingerbread) on DEFY?

    I want to know why he didn't intend to update challenges HIM to 2.2 to 2.3 Of course the phone can handle, and it will most likely better then the BONE buggy that 2.2 is already. Don't someone of another agreement that they should have their DEFY upd

  • HP 2000-210US: administrator Bios password

    I get an error message from 84619428 lock because I lost the bios admin password.  Can anyone help?  I also can't access the CMOS battery with this model of laptop. Help, please!

  • Need help to set up AP 1142 standalone

    Hi all Need help. I am trying to configure Cisco Aironet 1142 standalone, this access point has been previously connected to WLC and the previous post, I found that we need to delete and reload the AP private-multiple-fs, c1140-k9w8 - mx.124 - 21A .J