Control of decimals

Similar Questions

• Can a checkbox State (true/false) another State (different) check box in the control?

  Hello

  I am trying to find the answer in the internet and here in the support forums, but so far without success.

  So, I was wondering is it possible to make a CheckBox control (checked/unchecked) other (different) box in the same table.

  Lets say I have a list of items to take on the assignment in the field (in separate lines) in my checklist. Some of these items will be check together so that both can work as one.

  For example - gas generator and fuel tank:

  You can check the box next to "gas tank" if you need to take only,

  But if you check 'gas generator' numbers should automatically check the "fuel tank" so I remember to take it as well to the generator.

  So, please help me with the formula if there is possibility to do so in the last app (OSX) number. Thank you.

  Hi Shkacas,

  Perhaps you might consider to penetrate your activities field trip.

  

  The elements required for each activity are in another table. You can 'hide' this table by moving (copy / paste) to another sheet. The formulas will adjust automatically.

  Formula in the Input Table C2 (and fill down)

  = IF (B2, CONCATENATE (Required::B2 elements ",", Required::C2, ",", elements Required::D2, ",", elements Required::E2),' ')

  Ignore the additional decimals in the result. These are refills for empty cells in the table of the required elements.

  Another example where insГЁrent the check boxes unchecked "" (NULL, empty)

  

  Kind regards

  Ian.

• best method to transmit the PPM (servo control) in series-wireless transmitter? (how to combine binary + whole in a single series byte)

  I'm pulling my hair out here... I hope someone can help to guide me in the right direction.  I'm just learning binary and hex, so please forgive me (and correct me!) if I say something wrong.  I have to give credit when it is deserved, because I use info from a post on theautochannel.com to drive this development.

  I try to control a small indoor RC helicopter using LabVIEW and a USB joystick.  I communicate with a transmitter wireless via rs232 (TTL converted), the Protocol is 125000, 8n1. Each image is 14 bytes 2 bytes of header.  I would like to transmit data PPM (pulse position modulation) which is actually just a 10bits (1024 possible measures) range that dictates the position of the servo, for each channel.

  Byte 3 & 4 are channel 1, byte 5 and 6 are channels 2, 7 & 8 CH 3,... and so on until the bytes 13 & 14 which is CH 6.

  Each pair of bytes begins with "00" (binary).

  Byte 3 & 4 should look like "00 00 00 xx xx xx xx xx", where the first "00" is the header, then "00 00" is the identifier of the servo, and 'xx xx xx xx xx' represents the position of the servo. The identifier is actually integrated in the position of the servo, the bits serve a double purpose.

  That's why it all will look like this:

  CH 01:00 00 00 xx xx xx xx xx (position has a valid range from 0 - 1023)

  CH 02:00 00 01 xx xx xx xx xx (range 1024-2047)

  CH 03:00 00 10 xx xx xx xx xx (range 2048-3071)

  etc... If you convert the binary range, you can see how the second half of the bits ID servo are provided by the range of servo.

  I intend by entry VISA to send every byte to constitute the entire frame, and then I will pause ~ 10ms between frames. However, my question is how the hell should I code this? !!  I think I need to write, take 1 CH for example, bytes 3 and 4 together into a string and then split them back hand to be sent as two distinct bytes.  However, I do not know how to mix my header and the first two bits of my ID servo, which is binary '00 xx', with my servo position (which I know I can write in decimal form, as entry VISA will convert it in binary). Any thoughts on the best way to do so, given all this?

  An empty string character likens to a binary "0"?

  Has totally confused everyone?  I really hope not, but I'm pretty tired so let me know if I need to simplify my question.  I hope someone can enlighten me as to the best way to combine the binary constant w modification of decimals (or hex).  And if anyone has thoughts about a good way to organize my vi together, I understand that too!  Right now I'll just use the structures of sequence... I post my code but at the moment, there is not much to look at

  Thank you very much!!

  No, you do not confuse everyone, but I think you might have confused yourself.

  You basically need to do is to create the array of bytes that will be sent, and then use the array of bytes to a string, so you can send it to the serial port. The creation of the byte array can be done in several ways. You deal with 6 16-bit numbers, of which the lower 10 bits are the values of the position of the servo. I don't know what you want on the front panel to look like, but if you have 6 separate (one for each servo) controls with each set having a range of 0 to 1023 (for 10-bit), then you just have to OR each value based on the number of servo. Put all this in a table, add the bytes of the header and the array of bytes to a string allows to get a string that you can send via the serial port. You can also do this in a loop. Joined a VI to show the two concepts. You have not indicated what version of LabVIEW, is 8.2 you use.

• Lack of shot-up music/Audible in iOS 10 controls

  As a regular sound listener, I regularly used blow-up controls music on pause or go back as you drive an audiobook to keep my GPS map display on the screen. Since the update to iOS 10, shot-up music control buttons disappeared. Unless there is a more simple solution, I spend Waze audible, which is much more distracting and may be dangerous. Has anyone here found a solution?

  Hello chemess,
  Thank you for using communities of Apple Support.

  I understand your message that you want to use the audio controls in the control panel to control your audio books using a GPS navigation app. I understand your desire to not have music controls in the Panel. Controls the music is accessible from the control panel by opening Control Panel and slide the Panel to the left.

  Control Center to use on your iPhone, iPad and iPod touch
  

  Swipe Control Center left to play quickly, pause and control the volume of your favorite song, podcast and more.

  Best regards.

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

  After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

  Hey hernj103,

  Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

  Use Time Machine to back up or restore your Mac

  Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

  Try safe mode if your Mac does not end commissioning

  If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

  See you soon.

• Precise control of mixer

  Hello

  I wonder, is it possible to precisely drag/move/move and knobs in Logic Pro X mixer? I mean that normally if you click and hold the slider and make it slide simultaneously works normally. But as I remember in other DAWs method with using the key 'control', or 'command' or something like that and that didn't exist by dragging the sliders is very slow with accuracy.

  But I can't find this option in Logic Pro. Could you help me? Thanks in advance for any help.

  I'm sorry for the stupid question, I would never ask for such a thing in the forum, but I really just spend an hour to find the answer in google. Without doubt, I used the wrong keywords, but I tried a lot of things and found nothing that helps me. So maybe you could help me?

  "Hold the SHIFT key while dragging the Volume knob to change the volume level of the finer increments"

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcp8ec34eec

• Audio controls from the control center was lost in iOS10?

  Updated reluctantly iOS 10 and so far, the biggest annoyance is that my playback controls for some audio I play (audiobook of iBooks, podcasts with downcast, stream radio KPCC app) disappeared from the center of control... any way to recover?

  Quick scan power button or mute with the least amount of taps & shots is important when you want to respond to someone knocking on a door, or on the land line call, etc., and have hit to swipe several apps to reach the audio application when you were in another is an unnecessary extra step.

  Is there a way to get this back that I missed?

  In iOS 10, audio controls have been moved to a second page in the control center and are accessible by sliding left within the control center.

• Why is forgetful of Parental control?

  Why Parental controls (often, not always) forget and do not take account of my settings?

  I have, for example, deselected some apps, but when my daughter logs in to his account on our MBP she gains unfettered access.

  Is there a sequence in which the parameters must be defined? What I am doing wrong?

  Hi CreativeSmith,

  I understand that you are experiencing some problems with getting the parental controls and Restrictions work correctly on your Mac running macOS Sierra. Please take a look at the links below to verify that you have the Parental control configuration correctly.

  macOS Sierra: set up parental controls

  Please use the Apple Support communities to post your question. This should have the Parental control to function as it should.

• IOS 10.0.2: Headphone audio controls of temporarily unemployed

  According to the release notes for IOS 10.0.2, apple has fixed a problem that could prevent the audio controls headphones temporarily unemployed. but the problem is not resolved for my iphone 6 s more and today that I got the problem for wireless Beats headphones solo 3.

  Anyone else having the same problem?

  I am also having the same problem after updating to 10.0.2 and still I am not able to hear the audio clearly

• Sierra: key control and command swap?

  Hi all

  I use the option to swap the keys of my command and control, but it does not work on my 5 k new Imac. It did not work in El Capitan. I have already reset the NVRAM but no luck, the control keys keep order and even for my control keys. Bug?

  

  Kind regards

  Peter

  Thank you for using communities of support from Apple, PeterWeter!

  Congratulations on your new iMac! I see that your iMac on macOS Sierra is not allowing you to change your key options. Since I have been hit most of my adult life, is not able to use any key how I need you would slow me down.  I'll be happy to help you.

  Try safe mode if your Mac does not start -boot in safe mode is a great way to make sure that everything starts correctly.

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:

  • Check your startup disk and attempts to fix problems if necessary directory
  • Loads needed kernel extensions only
  • Prevents elements start and the login items open automatically
  • Disables the user installed fonts
  • Delete font caches, hiding the kernel and other files of the system cache

  Once your iMac starts up in safe mode, you should be able to define the keys on your keyboard as you want.

  See you soon!

• Ios10 control center

  I just updated my iPad iOS 4 10 and I noticed that the flashlight, the night shift and the calculator have disappeared from the Control Centre. When I open the Panel there are 2 boxes, one with the airplane, wifi, Bluetooth, do not disturb and orienration lock, Airplay mirroring, Airdrop, levels of brightness, timer and camera.  The second area of island are commands of the music. Can you point me in the right direction as to where the missing icons are gone please?

  I wonder if there is a difference between iPhones and iPads. I see on my ipad, night shift, but the flashlight is not there because there is no flash on the ipad. And no calculator on the ipad but I have one on my ipod.

  The inconvenience of having a manual based on the iOS instead of the device, the iPhone and the iPod have different capabilities than the ipad and vice versa.

• iOS 10 remove airplay and release of the control center.

  The airplay and drop buttons occupy too much space in the control center. This space would be more useful if it were the music app. I do not have now any use of airtime or air drop and would really like to be able to hide these buttons.

  iOS 10

  bliss13 wrote:

  The airplay and drop buttons occupy too much space in the control center. This space would be more useful if it were the music app. I do not have now any use of airtime or air drop and would really like to be able to hide these buttons.

  iOS 10

  Why?

  In iOS 10 slide the left control center and you have control of everything for the Music Center.

• Controls horizontal volumen in macOs Sierra

  Hello

  With the new volume control available under macOs Sierra (horizontal slider) now you can't click and drag the volume control that I used to do! Was perhaps than me, but I used this technique (click and drag) a lot of time for speed and simplicity.

  If it's a matter of UI design, I think it's pretty easy to keep the cursor in the vertical volume with a list of outputs available on the right side like this:

  

  So please! go back to the vertical!

  FWIW. the horizontal slider works for me.

  

  I doubt that the problem you are experiencing has nothing to do with the orientation of the slider.

  It is a technical user support site, Apple isn't here. You can let them know here...

  http://www.Apple.com/feedback/

• Control Center missing on iPad Air options

  Hello - I have improved my ipad to ios 10 Air and I noticed that the control center (slide up) is lack of many functions. When I slide up, its divided into two sections - half right displays an icon of ipad and ipad with a tick, said that she (but cannot be disabled); and the left side only has an interface to play small music with a volume and a play/pause button. where all other options in the Control Center went - plane / bluetooth / rotation / flashlight / etc etc etc? Thank you!

  Control Center now has two screens, one you see is right - if you swipe / drag from left to right, you should get the second screen with the icons you mention on it