Control of multi A100V HDR and HDR AZ1 camera
Hello
I am new to these forums and action cameras. I have only limited experience of filming. I have two cameras above, which I mainly use for mountain BIKING. Both are equipped with wifi and delivered with live remotes - LV1 and LV2, respectively.
Is it possible to put these two place for multi control using one of the two remote controls? I tried this weekend, but failed in a spectacular way.
Any help is very appreciated.
Yep, it should work without problem. (I have my phone app AS100 AS30 operation at the same time)
Have you tried the rest of this guide to the letter?
http://support.d-Imaging.Sony.co.jp/www/ac_portal/features/multiconnection/as200v/en.html
Tags: Sony Products
Similar Questions
-
How to put a hdr - az1 for automatic replacement of the SD card?
I have a sony HDR - AZ1 action cam and use it as a dashcam. I want to replace automatically the oldest video recording when the SD card is full, but may not know how to do this. Currently the device stops automatically once the 32 GB, the card is full. I use the smartphone android Playmemories Mobile application to control the camera.
Hi NomadS308,
Welcome to the community of Sony!
The camcorder is not the ability to overwrite old files stored on a memory card. When the card is full, you could delete the formatting of the card. I also suggest backing up files to an external device such as a computer before formatting.
If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch
-
How long the battery life should be recording with a HDR - AZ1 with remote control? And it will last longer without remote? There the batterys that last longer?
Thank you
Hi woodsracer,
You can record continuously with a full battery for about 85 minutes and 120 minutes if you're only reading files when Wifi is disabled and you are not using the remote control. The time is reduced if the two are in use. There are no other batteries compatible with this device.
If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch
-
HDR - AZ1 external microphone?
Is it possible to use an external microphone with the HDR - AZ1, through mini-USB, Wi - fi or an Iphone?
You cannot connect an external microphone for HDR - AZ1.
The other Sony Action cam models include a MIC-in, but the AZ1 is too small for that.
You can use an external Audio recorder and synchronize the audio of the film in post-production.
Kind regards
Michael
-
Question
I pressed (Control) (offset) when to bet and my characters of Gmail (the full screenshot) reduced to about 25 to 35%. How to restore? I already signed my Gmail account, restarted my computer (Windows XP has) nothing works.'Ctrl + 0' (zero) to restore normal size
-
What is the right way to use variables controlled by the two buttons and programming?
First of all, I apologize if this has been discussed before. I know not how to phrase succinctly the application, so maybe I just missed the search terms.
We have several pieces of the Labview software in the laboratory that automatically control things like the taps and heaters. Sometimes we also manually control these same things. I'm moving old NI PCI (and older versions of Labview) maps to a variable and based on compactRIO system shared network. However, I'm still not on best practices to achieve. I need to be able to have a script running at any time control panel so that I can access, for example, a valve controller (which is just a Boolean), and I need power open and close the valve by programming other scripts. I need, of course, the control panel to track the State of the valve until it opens another script, the Panel indicates that it is open, and the next push on the control panel it will close.
Historically, this has been processed using structures business to move from a "computer control" and "hands-on" with global variables that define the State of the valves. Of course, this is not recommended.
So far, I've played with the help of two variables, a status of valve and the other for the State of button. The Panel configuration then loops, reads the status of the valve and puts the State of button if the State of the valve has changed. I can do this with registers at offset or with the structures of the event, but anyway, it gets very crowded and seems inefficient. Is there a good way to do this in Labview? It seems this is a common problem, so I hope there is an easy and elegant solution that I've missed.
Variable published use shared network. Your scenario and your manual of the interface and change the variable and then shared your cRIO reads fair value and writes the appropriate values.
Now for a cool part. On your manual interface, right-click on your heart control that you want to use to control the shared variable and go to properties. There should be a data binding tab in the Properties dialog box. You can bind a control/indicator to a published network shared variable. So this button will always be attributed to the current state.
Your script should just read the shared variable before resuming to verify that it is in the correct state.
-
Cannot access control panel or Windows updates and not more sound
Yesterday, I restarted my computer and a message keeps popping up that I am victim of software counterfeiting (in reference to Microsoft Windows) when I bought the computer at Future Shop just a year ago. Also, now there is a red X on the speaker icon in the corner and said "no audio output device is installed". I followed the instructions mentioned in another post, as well as other Web sites, and nothing seems them works. Above everything else, I can not access the control panel. It appears and disappears immediately. If this were not already enough, Windows Update does not work or the other. The icon is there, but whenever I click on it, nothing happens.
I only bought the computer a year ago, and there is already a long list of problems with it. I'm at the end of my rope! If someone is brave enough to tackle these problems, I would really appreciate it. Thank you!So.Lai,
Thank you for visiting the forums of Windows Update. Please post your Windows Genuine Advantage (WGA) related posts in one of the following links:
For Windows XP:
http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads/
For Windows Vista:
http://social.Microsoft.com/forums/en-us/genuinevista/threads/
You will find the MVPS and forum MS Moderators who will be able to help you further. Do to the nature of your problem, you must do the following:
Run the diagnostic tool - http://www.microsoft.com/genuine/diag/
Then copy and paste the results in your post in the other forum. No personal information is collected in the diagnostic tests.
Thank you for visiting Windows Update forum.
Rick
-
original title: hotmail servers
Hello
I Net Nanny parental control installed on my pc and limit myself to give my child access to his Hotmail account to check emails.
There is an option in Net Nanny (NN) to allow only Web sites, but I have trouble understanding exactly what servers Hotmail uses to run.
Furthermore, I feel that some server addresses change over time. Is this true? If this is not the case, can you let me know which servers should I use to get a permanent solution for the NN filter.
Thank you
Neville
After all the Hotmail issues in the appropriate forum found here:
http://windowslivehelp.com/ -
Windows Control Panel has stopped working and cannot read the CD
Original title: windows control panel has stopped working
When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd
Hello
You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?
Follow the steps mentioned in the article below and check if that helps:
Start the computer in a clean boot state
Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
programs deleted, but their names are still appear in Control Panel of configuration/programs and features and how System Configuration startup tab I erase them for LIFE!
Hello
To change the startup programs and remains entered boot in Windows 7, use either of these methods:
«How to use MSCONFIG in Windows 7»
http://www.netsquirrel.com/Msconfig/msconfig_win7.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
During the installation of Flash Player, I get the prompt to close the customer control panel. What is and how it close?
This link to a thread on this forum about Adobe Flash Player explains how to kill (strong word) the customer dashboard:
I assume you are using a Mac.
-
I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?
OK I tried. No configuration work at all. And it is a purchased the LR in a group, set current online copy! I am at a loss. While I love the edition is a computer after all and I think I'll have a bit of scrap Lr if I can't solve this problem.
-
My computer was working fine. Then I went somewhere, but I left my laptop, but the lid closed, and when I came back, the properties of the screen are all seeds. The wallpaper was very large, and any Web site I try to open is also very important.
Hello
Try rebooting to see if that helps.
Use the system restore to a point before that happened.
Start - Control Panel - restore and backup center - upper left repair Windows
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html--------------------------------------------
Also, check to see if they apply:
Right click on desktop - customize - display settings - Set resolution.
Right click on desktop - customize - top left adjust font size (DPI)
CTRL + mouse wheel works ZOOM
CTRL + and CTRL - work ZOOM in and out
Your mouse/touchpad probably incorporates a ZOOM to it.
Your system also has a magnifier built in which could be a problem - it can be as often
programmed to work on the mouse/keyboards.How to turn on the Magnifier On or Off in Vista
http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.htmlTo see if your mouse/touchpad is set to ZOOM or enlarge use Control Panel - mouse.
The TouchPad (if you have one) probably also has Hotkey controls so check with the system manufacturer
Support, online documentation and their forums, where appropriate.==================================================
Are you logged on as ADMINISTRATOR?
Right click on desktop - customize - top left adjust font size (DPI)
How to change the font size in Windows Vista
http://www.vista4beginners.com/how-to-change-font-size============================
Start - type in the search-> REGEDIT search at the top of list - click box right on - RUN AS ADMIN
HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics
In the right pane, change AppliedDPI (double-click on it) of 78 who is from 120 to 60, which is (96)
I hope this helps.
-
I was listening to an audio book, and my sound came out, as well as the speaker in task bar icon. how it?
If you listen to the book on your computer you can try to restart the computer to see if that fixes the problem.
-
No connection between the computer and the digital camera.
Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there. First, he tries with this camera. I have a HP and HP M305 camera.
You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threadsI gave you the original link will show also a lot more updates and drivers for XP also.
Software & Driver Downloads
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648To start Devmgmt.msc type device manager in the Start Menu / RUN box. Make sure that the camera is fixed when you look in the Device Manager.
Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
http://www.TechSpot.com/VB/topic122125.html
Maybe you are looking for
-
iPhone opens applications automatically
my iphone 6 + open applications automatically, written letters in my browser
-
Firebug doesn't work at all after Firefox update
This morning I updated my firefox to 14.01. After one of my i.e extension firebug simply ceased to work not at all, I mean that I could not yet find the icon of my browser. I even tried to go to tools > addons > but you know what, even this page does
-
Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe
Hello world! I don't know how, but I have a problem when my windows Vista from (running)The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this proble
-
Cryptsvc.dll serious problem with Windows Update.
Hello world (Vista Home Premium - 32-bit)I'm having a serious problem to Cryptographic Services which will affect my ability to update windows and use my PC. Since all April 24 Windows was not able to update and I noticed that my computer has been ru
-
Printer starts a print job, but don't complete it
Why my printer does not finish my impressions and stops mid print? It shows the status printed with the percentage scale bar and it freezes sometimes simply. I have to restart my computer, and then the print job ends sometimes. Is there some kind of