Controladora ethernet

Similar Questions

• BUSCAR CONTROLADORA ETHERNET

  NECESITO UN BUSCAR CONTROLADORA ETHERNET

  Hey SUSANA BEATRIZVELASCO,.

  Thanks for posting this question in the Microsoft Community Forums.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• After the upgrade to USB 3 Hub Ethernet Sierra is no longer works

  On my mid-2015 15 "MBP, I have a Sitecom CN - 340 USB 3 Docking station. Apart from all kinds of outputs, it has an Ethernet port, which I've been using for the last 6 months without any problems... until the update for Sierra. Since then, the report of control center that the cable is not connected. I am now connected via Thunderbolt. Has anyone noticed this too? And then knows how to fix? The latest drivers are February 2016.

  Kind regards

  Oliver Holmes

  It turns out that the problem is so the driver being old-fashioned. The chipset is the AX88179 and the manufacturer provides its own drivers here: http://www.asix.com.tw/download.php?sub=driverdetail & PItemID = 131

  So, all is well again.

  See you soon,.

  Oliver Holmes

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• Ethernet to the airport also on?

  I have my Mac connected directly to our home Airport Extreme via an ethernet cable. That same Airport Extreme acts as our main wifi router. Until recently, I didn't cause to turn on the wifi of the handiest airport on my Mac, but I have to if I want to use the new Sierra "unlock with Apple Watch" and copy and paste between the characteristics of devices, that which I want to be able to use.

  My question is, is my default Mac using the connection of the cable as my internet source or have two internet connections active will complicate things?  Is there a way to prevent the Mac to use the wifi for the internet, but still have it on for the other features it offers?

  Thank you.

  Nevermind, I found the answer outside this area communities:

  http://www.Macworld.com/article/3039842/Macs/can-you-use-Wi-Fi-and-Ethernet-on-a - mac-to-the-same-SystemRoot\Cluster\Reports\Validation

  You can dictate the order of preference for which network source is used in settings > network on your Mac. By moving "Ethernet" upward, your Mac always uses the Ethernet Wifi or any other sources listed below, as long as the Ethernet is an active connection. If something happen with your Ethernet connection (cable comes off, maybe) your default settings for Mac to the next source in the list that has an active connection.

  Apparently there is nothing wrong with having active ethernet and wifi connections at the same time.

• Ethernet questions

  So I don't know what is happening but I had an internet outage the other day for about 36 hours when some construction cut my ISP ADSL line and never feel things acted like weird, but from what I can tell it's my 4th gen time capsule at fault.

  Only 1 of the 3 ethernet ports seems to put on the internet. I use the other to my basement, and it sometimes says it's on the right of the network with no internet access, but most of the time just says unidentified network, no internet access. He worked all day but seems to just decide he doesn't want to chance.

  The other problem is that the TC itself appears to be loss of connection randomly with flashing orange. When reset, it works again. Don't know what is happening here. I use a PPPOE set up to connect via the TC; the ADSL modem is connected via Ethernet. Nothing has changed on my end, this could be a service provider because of the failure?

  Thank you

  Also, the modem is a router?

  What is the make and model?

  I use it as a router and try again with just the bridge the TC.

  PPPOE can be problematic.

  Ethernet ports can blow... If you get a tip to the top of the line... then we can take any ethernet port connected to both... If that includes the Port of the TC WAN no longer functions as a router.

  You have a little work to understand the question... but another router is key.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• Slow Wi - Fi, Ethernet no workee

  We have a Mac Mini 1.1 2007 10.6.8 which worked well for years via Wi - Fi and connected via HDMI to our TV.  Lately, movies through the Mini have been shredded, so we used our Roku and our Blu - Ray player, also via Wi - Fi, show excellent movies.  Recently, the Mini has slowed to the point that even Web servers have become too slow, we decided to launch a Cat5 cable to check it out.  I brought my MacBook Pro running El Capitan put beside her.  Here are the results of our tests:

  Wi - Fi with the tested Mini download 3.6; Although the MacBook Pro in the same place obtained 12.6 download.

  Ethernet with the MacBook Pro got 11.6 download (Yes, a bit slower), but the Ethernet to the Mini would not work well enough even to run a test.  The green light in system-> network preferences would come only after four or five minutes, and then Web sites would expire with Safari and Firefox.

  Activity monitor on the Mini during the speed test Wi - Fi got nominal results:

  ±75% idle CPU

  1.21 GB of memory of 2 GB of free

  Disc of ±1 KB of intense activity (seems low)

  Use 3.15 free GB to 60 GB disk (it is full)

  Network 900 Kbps per second peak (very slow)

  What could cause the Mini being so slow with internet connections?  My partner said we need a new computer and I agree, but I still would like an idea of what could failing being that could cause dramatic slowdown.

  You have any ideas what might happen or what else we could test?

  -Gil

  I release about 30 GB on the Mini and see what happens.

• How to connect an external device via an Ethernet cable with iPad Air?

  I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

  LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

  You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Should the Apple TV be wifi to pair the remote app? It can use Ethernet instead?

  I was unable to get the new application Apple TV to pair with my iOS devices. Or see the other. I have Apple TV via the Ethernet cable is plugged in (4th gen). It has network and internet access very well. Must be on wifi to sail with an iPhone or an iPad? Google searches have turned up nothing so far.

  Thank you!

  Apple TV can be on wifi or ethernet, it makes no difference. However, they need to be on the same network.

• Ethernet port doesn't work - posted the solution don't DO NOT WORK

  All of a sudden my Ethernet connector on the iMac has stopped working.  It is NOT the cable, as I plugged into another computer and the other computer connected without problem.  I did the fix published on the pages of mac support trying to update the Configuration data of the kernel Extension Incompatible.  The support position familiar updated to version 3.8, but mine is version 2.13.  I did the fix explicitly four times, and I still have no Ethernet connection. WiFi is fine. Yes, I restarted everything.  Nada.  Help!

  I'm on Mac v10.11.6

  Hi, so he worked before in 10.11.6?

  What is the exact name of this extension?

  Recently storms in your area?