Do not feed paper for incoming faxes, officejet pro 8600 premium

Similar Questions

• Can I connect a MacBook OSX 10.4.11 running for my HP Officejet Pro 8600 Premium?

  How? Where can I find the correct driver? Is there a place to find solutions of workaround, if they cannot be connected?

  Unfortunately, the driver for 10.5 is the oldest available. My suggestion would be to upgrade your MAC for at least OSX 10.5 or try to use another computer to the printer with the interface. Workarounds with the drivers, especially when it comes to new drivers being installed on older machines, may be very risky at best, because they determine how the product communicates with your computer. If this communication is not clear and interferes with other processes it can lead to unexpected problems arise.

• Maximum weight of the paper for HP Officejet Pro 8600 Premium

  What is the "Maximum paper weight" represented for a HP Officejet Pro 8600 Premium model #CN577A"?

  New printer for us and I can't find the maximum weight of the paper in the instructions, plug - both in the manual or online or other sources.

  I spent more than 45-minute wait for the conversation online tech support (estimated time was listed as 7 minutes when I plugged) and abandoned.

  In our old printer (HP Business Inkjet 1200n), we could use up to 100 lb Bond (8.5 x 11 office paper).

  Thank you.

  Hello

  From the #166 manual page:

  

  Kind regards.

• OfficeJet Pro 8600 Premium e-All-in-One - N911n photo paper is not a choice of paper to Tray 1

  For the HP Officejet Pro 8600 Premium e-all-in-one - N911n

  I am running Windows 7 64 bit

  No error message

  New configuration of the printer

  I don't see as a choice of paper photo paper in Tray 1

  Hi FrancoArdito,

  Follow the steps below to print photo Tray 1

  1. Insert the photo paper 4 x 6, 5 x 7 or 8 x 10 Tray 1

  2 open the print application printer preferences

  3. click on the paper/quality tab

  4. Select the paper size, media Type and paper source

  5. click OK to save the settings, and print the application program.

  

• Error message Officejet Pro 8600 Premium that the drivers for this device are not installed. Code 28

  Printer : Officejet Pro 8600 Premium. model CN577A

  OS : Microsoft Windows 7 Home
  Base-64

  How your product is connected to your PC? : Network

  Description of the problem : in the Device Manager I have an error message with the

  OfficeJet pro 8600 icon - "the drivers for this device are not installed.

  (Code 28)

  There is no driver selected for the item or a set of device information. "I have

  have uninstalled and reinstalled the driver without result. The printer

  seems to work fine.

  Hello

  Yes, I would also suggest a new re-installation of the software.

• HP Officejet Pro 8600 Premium - black line on pages that pass through the document feeder

  Hello! I have a HP Officejet Pro 8600 Premium. Any time that I scan, fax or copy via the document feeder a black line appears on the document created. Anyone know how to fix this?

  Thank you in advance,

  Lynn

  Hello Lynn_Fritschi.

  I see that you encounter errors of quality on your prints when you use the Officejet Pro 8600.

  Here are two links that should be useful for you. The first is to support your product page and the second is a document that explains errors output quality and the ways to solve them.

  HP Officejet Pro 8600 Support

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Please let me know if they help you.

  -Chauntain

• OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

  OfficeJet Pro 8600 Premium, Windows 7

  How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

  Thank you!

  Greg

  Hi Greg,.

  At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

  1 Ctrl + p to open the print dialog window.

  2 Select the printer of desire and click the preference.

  3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

  See you soon,.

  Kimu

• How can I fix a paper jam in an Officejet Pro 8600?

  Have you ever had a paper get stuck in your Officejet Pro 8600 and I was wondering what to do?  Are you afraid that you might damage the printer to try to remove the jam?

  HP has made the process of cleaning a much easier paper jam by providing clear documentation and a video for costomers.

  Here is the video on Youtube HP Printing channel:

  The documentation for how to remove a paper jam in an Officejet Pro 8600 can be found by clicking on the link below:

  http://support.HP.com/us-en/document/c02915719

  Hope this helps everyone!

• OfficeJet Pro 8600 Premium: HP OfficeJet Pro 8600 Premium does not print Windows with Word 2016 10 envelopes

  After that I have upgraded to Windows 10 and Word 2016, envelope and label printing feature would no longer work on all-in-one printer, HP OfficeJet Pro 8600 Premium.  Please provide any possible solution.

  Hi @dshirley22,

  Thanks for the response back.

  I would at this point uninstall all previously installed printer software. If you need assistance, here is a document that can help - uninstalling the software of the printer (Windows).

  Once the software is uninstalled, use the HP printer installation wizard to help install the software. This tool will search and find the version of the drivers and the printer software up-to-date.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Cannot install the downloadable software for a hp officejet pro 8600 more. running vista 64 with

  I'm running vista 64 on an asus p5qc with a q9550 with intel and 8 GB of ram. I downloaded the software for a hp officejet pro 8600 and it worked for a wireless configuration, while it stops. I was impossible to uninstall or install the program.

  Hello richardieo3,

  Try again with the doctor of printing:

  >> HP Print and Scan Doctor

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

  See you soon,.

  ferRx.

• HP Officejet Pro 8600 Premium: Printer remains offline after standing start

  HP Officejet Pro 8600 Premium takes 30 minutes + to connect after boot or restart computer?

  Also when starting printer error message - cannot send faxes? (Fax complete info)

  It is a wireless setup. Phone line is AT & T U-Verse.

  Hi bunkyb43 ,

  Welcome to the HP Forums.

  I see that the printer takes a while to connect to the printer once the computer has been restarted or powered.

  I've seen this problem before and I could solve the problem by simply ensuring that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Once the printer is connected to the wall outlet, please use the power button to do a proper feeding cycle.  This will make a semi be able to reset the printer.

  I'll also give you a document ensuring that the fax settings are correct. Please click the link for "Cannot send or receive faxes".

  Write me back if you have any questions or concerns.

  See you soon,.

• 6 "x 9" envelopes with officejet pro 8600 premium

  I try to print 6 "x 9" envelopes of greeting cards on my new officejet pro 8600 premium and get error message paper size mismatch. " With my old photosmart printer I was able to create a custom size envelop for this problem. But this option is not available on my new and better printer. Any ideas?

  Hi garyaw2,

  Try adding your old printer driver for JO 8600 and try to print, please follow the steps below to add a printer.

  Start > devices and printer > add a printer (available on top) > select Add a local printer (NO other options) > select Create New Port > port TCP\IP Standard select > next > enter IP address of JO 8600 (can be found by selecting the option Wireless on the front panel of the printer) > following > Select manufacturer such as HP or Hewlett-Packard and under printer select your old c309 printer and complete the wizard.

  Try to print again with prinetr selected c309.

• HP Officejet Pro 8600 Premium ADF analysis convex/Fisheye results

  Not only do I have to deal with random vertical lines on the digitization of documents in format pdf, I was out buying this AIO believing that I will be able to scan above 300 DPI using the ADF. Why is this NOT advertised? I also notice that the ADF scan results are tilted, so I have to manually turn the resulting page (and this always leads to fuzzy edges because of anti-aliasing). I read where the use of the 'PDF' indexable parameter will straighten the scans, but the text is rendered evil and statements blurred and faded. Other than that, the real printer/copier works great; the part of scan is terrible (and that was the only reason I bought this printer).

  Now, my current complaint is when you scan a document with horizontal lines, these lines are not only not right, they are curved (like a fisheye effect or the lines are convex in shape). I tested several ways; I open the pdf file with Photoshop and after recovery of the document, I use the tool rule to mark both ends of the line. When I look at the center of the line, it is not in accordance with either of the end points. It's like the center of the page was pushed toward the inside of the lines causing a bit for not being straight.

  Everyone has noticed this or know what I can do to fix this? It seems that this printer has many problems with scanning.

  Hello Shan-Dysigns,

  It seems that you have many questions related scanning with your HP Officejet Pro 8600 Premium, they will have vertical lines, jump of twisted lines are curved, etc..

  This document from HP: vertical stripes, lines or streaks in the Copies, faxes or Scans mainly covers the vertical lines and food issues.

  To seek to solve looks curved to the scans, just appear like that during the ADF or flat glass in this way as well?

  I would like to allows you to check the updates of the firmware of the printer: get the latest Firmware and updates, so please make sure the printer is connected directly to a wall outlet: questions when it is connected to an uninterruptible power supply/Strip/surge protector power should help explain why.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• HP officejet pro 8600 Premium: HP officejet pro 8600 optimal N911n-no interface to computer with win10 installed

  Hello I have a HP officejet pro 8600 premium tto e-all-in-one-N911n printer connected to a Lenovo desktop computer. I recently updated my computer from Win8.1 to Win10. I have tried to find drivers and updated the printer software for my printer. Currently, my printer will not run any computer to printer functions because I can't establish any interface between these two products. If anyone knows when there will be an update of the printer software match Win10, please inform Mr. thank you.

  Uninstall the printer and download the complete functionality for your operating system software

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322916/model/4323651#Z7_3054ICK0KGTE30AQO5O3KA30R1