Controller HD Audio is the ability to consume during sleep or Hibernate in Windows 7

Similar Questions

• windows program will rearange themselves when the monitors are in mode 'sleep' - how to stop windows switching screens

  IV has 3 screens on a map via display port adapter and a 4th on a second card in order to have a 1 on top of three parameters.

  the computer itself does not sleep because I have servers running but I put screens on standby after 10 minutes.

  for a long time, all screens would go to sleep and wake up without any problems... in the course of the last months, 2 questions.

  1. once the monitors to sleep and no consistent time 1 monitor wakes up enough to show the backlight, but no display... wake up ok and sometimes screens dislocated.

  and

  2 when the monitors have the power save / standby mode, some of the Windows I had open will have been moved to different monitor as monitors have been disconnected or "detected" numbers have changed and I saw the change number several times as well, but not always.

  I say some because I have 4 windows open on my left most monitor and 2 of them end up on my right monitor after the glitch.

  Sometimes things on my low Center {main} will end up on the top of the single monitor page.

  no rhyme or reason... a few days no problem at all don't wake up and everything is where it should be and all the screens have slept through the night

  for all the tech info

  ATI 5750 and 5770 in mode xfire w / 1displayport/DVI / HDMI/DVI 1 / 1 DVI.

  and ATI 5450 to the top of the monitor page

  Windows 7 x 64 / 8 core AMD8320 / 16 gig mem.

  latest video drivers...

  any info?

  I'm a tech and iv been scratching my head for a while on this one

  thnx in advance for reading even to see my problem

  thnx even more for an answer... lol

  Hello

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Blue screen to wake up from the sleep and Hibernate in Windows 7

  I had this blue error message screen "kernel_data_inpage_error" to wake up from hibernation in wndows 7. I tried to reinstall windows 7, but the problem persists. Please advise the steps to solve this problem.

  Hi Zen81,

  Thank you for your message.

  I suggest to perform a clean boot to see if a startup program may conflict with the RESUME from hibernation/standby state:

  Clean boot

  http://support.Microsoft.com/kb/929135

  If you have no luck with it, you can test your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I disable the password at startup and sleep awake HP pavilion Windows 8

  When I first started all I installed the password. There is no one else in my house that I care and that you want to disable the password. I went to the control panel and don't check the password none on sleep. I always get the password on the two start up application and awakining of his sleep. How can I disable password?

  I think it's how you do it:

  1. Go to charms (top-right with the mouse)

• No amber light in the button walk / stop during sleep, now no blue light when Windows is running.

  The first took place several weeks after a mysterious ailment judgment then "standby mode". Last night, "closing Windows" hung for 10 minutes until that I forced the closure in holding the power button. Now, Windows loads and runs - but without the blue light in the power button.

  I would like to know why, how to fix it and - especially - if it's dangerous. I count on my computer for all of my business account.

  Any help will be greatly appreciated.

  Now, Windows loads and runs - but without the blue light in the power button.

  -> If Windows runs as it should then light is only an indicator of power. You're probably dealing with a faulty LED. Nothing to worry about.

  I count on my computer for all of my business account.

  -> It would be a case of all stored inside the computer records and no external backup? A big accident waiting to happen? If Yes, then this would be an ideal opportunity to review your backup strategy. How your business would suffer if you lost a value one day of data? Value of a week? The lot?

• Ability to add the owner/3rd party Audio out the Audio preset?

  Is it possible to add your own .wav or mp3 files directly in the Adobe Premiere folder where are audio effects?

  I would like to have loaded on the program directly instead of add them on my media folder, so I KNOW what I'm working with. (For example the sounds I've created / download when I click Audio at the bottom of the program and have as an option)

  Thank you!

  dchi

  This is suggested by how to add sounds user displayed below first elements 13/13.1 Windows Audio tab/sound effects.

  First Elements ATR troubleshooting: EP 13 / 13.1: adding sounds user under the Audio tab

  I have proof it will read once again in the morning morning. Can't wait to see if this is what works for you.

  Thank you.

  RTA

• Combo satellite decision-making C50-B-15W has lost the ability to line

  Hello

  I use Audacity to record from analog sources, using the line - in the ability of the combo.
  With the last update of Windows 10, it's gone.
  Line does not appear in the list of audio mixer recording devices, or list in Audacity.
  I have re-installed the Realtek drivers and the drivers from the Toshiba site, but the fault remains.
  Has anyone else had the same problem and if anyone has found a solution?
  Thank you
  PCPlod

  For all those interested in the solution to this...
  I found the answer in another forum:
  1. open the Manager realtek audio
  2. click on icon (top-right) yellow folder "connector settings."
  3. check the box 'enable auto popup dialogue '.
  It is that easy.
  The next time you connect your line Mini-Jack, select microphone and it will act as a component line snap.

• iMAC loses the ability to control external devices. What can I do?

  I had problems with my iMAC "End of 2013", where it loses the ability to control devices (USB connected) external, either a printer or a CD/DVd burner. restart the computer will (usually) restore ability of the computer to control the external unit.

  With a printer, the computer or send the print job to the printer. If correctly, the printer receives the print job, it will print. Otherwise, I restart the computer, and then the computer can send print job. But, in the case of the CD/DVD burner, the computer needs to communicate with the Cd/DVD writer throughout the registration process. I been rebooted the computer before each record (as a precaution), but today, even this does not ensure a registration succeeded, and a blank disc is ruined.

  Unless one of you guys come up with a solution, maybe I have no choice but to throw this computer in the trash and buy a new iMAC. If that seems extreme, I must report that I received my most recent iMac for free. In the last months of Apple Care on my previous iMac, Apple has decided to give me a brand new iMac, because of repeated problems and overheating on the previous Mac.

  Reset the management system (SCM) controller on your Mac - Apple Support

• SR1000 controller multimedia Audio and video controller (VGA Compatible)

  Hello

  I have a Compaq SR1000 and look for drivers for:

  Video controller (VGA Compatible)

  Multimedia Audio Controller
  SM Bus controller

  I visited the site of Compaq and HP for the drivers but they all list the following computers:

  • Compaq Presario SR1000IL
  • PCCompaq desktop Presario SR1000T (P8657H)
  • Compaq Presario SR1000V (P8657F)
  • Compaq Presario SR1000Z (P8657J)
  • Compaq Presario SR1000Z (PU026AV)

  I tried to download drivers from the SR1000IL for my SR1000, but none worked.

  Any help would be greatly appreciated.

  Thank you.

  @Freddie09

  ADI SoundMax:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&prodNameId=316715&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=hd-17950-2

  Intel graphics card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&prodNameId=316715&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=PSG_I23037-107909

• Intel RST 15.2.0.1020 removes the ability to see or select the two disks in SSD Dashboard 1.4.3

  Save yourself some headaches if your RAID with Intel RST race of 10 to win...

  Installed Intel Rapid Storage Technology 15.2.0.1020 technology application & driver.

  Readers SanDisk Extreme Pro 240 GB SanDisk SSD Dashboard 1.4.3 lost to see and choose capacity 2.

  ----

  Restored to the application of the technology Intel Rapid Storage Technology 14.8.0.1042 & 14.8.1.1043 driver.

  Readers SanDisk Extreme Pro 240 GB SanDisk SSD Dashboard 1.4.3 regained the ability to see and choose 2.

  ----

  Microsoft Windows 10 64 Pro (10.0.10586 build 10586).

  Update - I tried Intel RST 15.2.0.1020 with SanDisk SSD Dashboard 1.4.4 and the results are the same, you lose the ability to see both drives RAID in dashboard, indicates only the disk 0.

  I set the another fiasco, somehow I had started with Application Intel RST 14.8.0.1042 and 14.8.1.1043 driver. Then when I uninstalled Intel RST 15.2.0.1020 and tried to reinstall Intel RST 14.8.0.1042 it would fail because the driver was more recent.

  Intel RST 14.8.1.1043 Application, I downloaded and installed very well and allows to SanDisk SSD Dasboard 1.4.3 and 1.4.4 see both drives in RAID controller RAID SATA ICH8R/ICH9R/ICH10R /.

• How to connect to bluetooth speakers in windows 7. the speakers are broken, but where do I select them as an audio on the device?

  I have connected to my Belkin I 78 audio device, it is paired with my Acer laptop, but the device does not appear in the settings as an alternative the device sounds. The ability to use Audio service is selected on the Belkin device in the bluetooth settings.
  The Belkin unit works very well with my Windows mobile and my Android tablets and phones

  Hello

  Note: Check if the Bluetooth speakers are listed in Device Manager.
  
  Method 1: Run the hardware troubleshooter and check if that helps.
  Follow the below mentioned article:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  Method 2: Follow the steps mentioned below:

   

  (a) right click on the speaker in the taskbar icon.
  (b) click on playback devices
  (c) right-click on the empty space
  (d) select Show disabled devices and Show disconnected devices
  (e) see if the Bluetooth speakers are visible.
  (f) if they appear, select and make a default device.
   
  Method 3: Install the software that came with the speakers, then check.
   
  Reference:
   
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices 
   
  Note: The article also applies to Windows 7.
   
   
   

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• How to document iMac to my apple tv 2, but sending audio to the Airport express connected to my hifi

  I have an iMac, a macmini an express airport. I want to send 720 p video to the Apple TV 2 iMac (or macmini) but send audio to the express from the airport which is connected to my stereo. If the apple TV 2 will serve as a video receiver connected to my projector on the ceiling. (I don't have a way to use a hdmi cable). This is the reason why audio must be sent to the hifi differently.  Alternatevely because the macmini is connected by USB cable to my hifi (to my dac), perhaps there is a way to send audio from a movie to the stereo through audio external USB card (it is the dac) while reflecting the macmini for the Apple TV 2...

  in iTunes, you can select more then 1 speaker output could be the express and then mirrored to the appletv in the manner of STDS, if is not in iTunes then I think that you need a third party such as the wing option

• Is it possible to increase the font size on web pages? I can increase the size of the page but then lose the ability to see the entire page.

  I've just updated El Capitan, but the font size on web pages went all teeny weeny.

  I was wondering if we could increase the font size? The page can expand via "zoom in", but then lose the ability to view the web page in the blink of an eye.

  Thanks in advance.

  Yes.  Open the Terminal app and type the following command followed by the Enter key or return:

  : write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2MinimumFontSize - int XX

  (triple click on the line to select it to copy and paste into the Terminal application).

  Change the XX to the font size you want as the minimum font by default.

  Or you can use a css style sheet.  This site describes it and the Terminal method: specify Minimum font size in Safari 10.0, macOS Sierra

  

• TVos 10.0 connects not to the audio from the airport

  Since I've upgraded to the latest AppleTV (about a year now?) I had to browse the audio airplay on my airport because connecting the HDMI cable directly in my system Pioneer VSX 1020 Surround THX certified cinema makes the freak out of the unit and quickly scroll well some input devices, resulting in a cacophony of strong gusts of random audio sources.  My job, as long as I've owned the thing, was to plug the HDMI directly to the TV and run the audio through the airplay of the airport that connects to this same system surround as my input source "iTunes" for my iPad Pro, iPhone, Plus 6, Mac Mini and MacBook Pro (s).

  I upgraded to tvOS 10.  last night and now, even that does not work.  You can select in the settings, but as soon as you leave, it is default to the direct connection of HDMI on TV never inviting to enter the password for Airplay.  Anyone know of a work around for my solution to workaround for this wonderful device that has been damaged since its inception?

  Hello. Can you try disabling the AirPlay password? In addition, your TV has a (possibly optical) audio output which you could feed the surround system? Or does have a HDMI with ARC port that would work with the system? Turn off the TV and receiver control in ATV could make work more happily with surround sound.