TVos 10.0 connects not to the audio from the airport

Similar Questions

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• LabVIEW Terminal connects not to the EV3 EV3 software retail will be (but pilot LEGO will not uninstall)

  Windows connects successfully to the LEGO EV3 via USB or Bluetooth.

  However, the Terminal LEGO of LabVIEW 2015 do not recognize.

  I installed the software at retail EV3 for check and it * is * connect to the EV3.

  I'm trying to fix the "LEGO Mindstorms NXT x 64" driver, but it will not uninstall even if I uninstall everything of LabVIEW, including the module (input administrator rights when prompted.)

  I've been struggling with this days, and I need to connect my EV3 to teach my students LabVIEW.

  Any help is greatly appreciated! Thank you in advance.

  -Associate Professor Matthew,

  #Date: Thu, January 21, 2016 17:21:58
  #OSName: Windows 7 Enterprise Service Pack 1
  #OSVers: 6.1
  #OSBuild: 7601
  #AppName: LabVIEW
  #Version: 15.0 32 bits
  #AppKind: FDS

  
  21/01/2016 5:27:54.774 PM
  Coolish 0x00BA6193:
  c:\nimble\penguin\labview\components\mgcore\trunk\15.0\source\ThEvent.cpp(267): coolish 0x00BA6193:
  Minidump ID: 789e6f18-0e9e-4b10-8b46-c0dd7448d8d4
  $Id: //labview/components/mgcore/trunk/15.0/source/ThEvent.cpp#1 $

  We found it!

  Our IT Department has been able to dig up in the driver package and finally managed to uninstall.

  Something has been damaged and the pilot wouldn't uninstall correctly.

  This fixed the problem beautifully.

  -Matthew

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• Time Capsule will not extend the Airport Extreme network

  My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.

  Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).

  Someone has an idea of what's going on?

  Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.

  My airport extreme (do not know what version... can't even find it in the system report)

  You say that the AirPort Extreme does not appear when you open AirPort Utility?

  If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.

  Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?

  Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State.  If there is, what is the message next to status?

• 5 ghz not listed is not on the Airport Express

  My 2.4 Ghz network is fine and my 5 GHz appears on some devices.

  It does not appear on my Smart TV and my TV from fire.  Both devices have seen my old 5 Ghz router.

  I'll put something wrong?

  The 5 GHz band is limited in scope. Where is the Terminal AirPort situated Express regarding the Smart TV & TV of fire? What exact model of the AirPort Express you have? Y at - it other routers (wireless or not) in your current network configuration?

  Your 5 GHz network uses a name of network with spaces or special characters? Your network is hidden?

• iPhone connects not to the MacBook

  I have a new macbook snazzy.  When I connect the iPhone to my girlfriend 5 it records not yet connected, no charging symbol or anything.  I connected to my laptop windows with the same USB cable and everything is as it should be, I also connected other iPhones and they connect perfectly.

  I read through many sons of discussion and all procedures to address these problems, but nothing helped.

  All suggestions welcome.

  There is an update for your Mac iTunes.

  Open the App Store, and then select the updates menu.

  Restart your Mac after the update is installed, and then connect to the iPhone and launch iTunes.

• Firefox V 25.0.1 on an iMac OSX 10.9 will not play streaming audio from a web site. Audio on Safari V7 OK. Any ideas on how to get the audio Firefox to play?

  The audio on the site is in MP3 format. The site is coded in PHP.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• iPhone 4S connects not to the PC under Windows 7 64-bit

  My iPhone 4S does not connect to my windows 7 64 bit PC by USB cable. Several times that no it will not yet recognized, but after several attempts to unplug and plug in the USB cable, it will finally try and download the driver but it says that windows cannot download the driver as the USB device is not recognized! The cable and USB port works perfectly with my iPod Nano and iPod touch, and it's only my iPhone which is problematic! I tried literally everything these forums and Apple forums have recommended, but nothing works. Please can someone help me?

  Hi Daniel,.

  Welcome to Windows 8 community.

  As you are not able to connect iPhone 4 to Windows 7, I suggest you follow the steps for Windows 7, mentioned in the following link.

  http://support.Apple.com/kb/TS1538

  If the problem is not resolved you can go ahead and contact support apple technique. Check out the following link.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

  It will be useful.

• FTP with Dreamweaver CC connects not to the point Windows 8.1

  I just bought a new system and went to Windows 7 where everything worked very well, to 8.1 Windows. With the same settings, I can not connect via FTP to my server.

  I checked with the firewall and its not be blocked.

  Does anyone know why this would be?

  Thank you, turned out to be McAfee!

• 6500 went a printer icon while offline connection-not on the screen

  just got by impression-5 minutes later when I tried to print again, it will not be printed denounces in offline mode

  have win 7 - its plugged into usb port

  I tried hps solution 1, 2 and 3 tried print and scan doc

  checked to make sure everthing is plugged

  tried to restart thanks

  Hello katt6,

  I understand that you receive a message saying "Printer offline" using the Officejet 6500 a. I will do my best to help you! Please make sure that you followed all the steps in this document from HP "Printer is off-line" Message appears on the computer and the printer does not print: Windows 7

  Please post your results, I will be looking forward to hear from your part have a good night!

• The addition of extra hard disk to a6110uk - can't find a spare cable to connect (not to the power cable)

  My hard drive is almost full and I would like to add an additional hard drive, but I don't know what to do. I can't find where to connect the data cable from circuit board. All thoughts. Thank you.

  Thanls for all the help - I ordered a few parts to see how it goes.

  Best regards, Simon

• Windows Live Mail connects not to the roadrunner pop server.

  I am trying to add my RoadRunner e-mail account to Windows Live Mail, but get the message that the server has rejected the email address

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/