Recovery with Satellite L300 problem

I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

Help, please!

Additional details
I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

Any help appreciated

Thank you, Andy

Post edited by: ADMIN

Hello Andy

Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

Tags: Toshiba

Similar Questions

  • Satellite L300: Problem with webcam

    Hello. Sorry for my English. I have a laptop Toshiba Satellite L300-w15
    I have a problem with the webcam. Tried tons of different drivers. Official drivers from this web site, drivers by number of VID/PID... nothing helps. I think that someone has tried to change firmware on webcam and set bad firmware. Can you tell what webcam is installed on this laptop? Chicony? What model? Now, the web cam code is: USB\VID_0C45 & PID_62C0 & MI_00\6 & B22C026 & 1 0000
    Search by this code, I realized it's webcam from another laptop, Toshiba l300... you can what can I do? Can I change firmware to normal? Where can I take it? For what sex cam should look for firmware...

    Windows xp. tried to reinstall windows... nothing has changed

    Can you please install original OS that you got with your laptop and check the webcam feature?
    Or you got this cam without pre-installed software?
    > I think someone tried to change firmware on webcam and set the bad firmware
    As far as I know Toshiba doesn't offer any firmware for cam, just pilot and Toshiba webcam application. No more than that.

    What operating system do you use?
    You have installed and configured? I ask this question because I don't understand how someone can have access to your laptop?

  • Problems of recovery with satellite A30 303

    I launched the recovery utility, and then I selected the recovery mode in advance that my hard drive is partiotioned, and I didn't want to format the second partition where different data files were stored.
    The first recovery disc has been loaded and files have bben transferred, then when you are prompted to load the secondary drive an error message as single user are not allowed... has been shown.

    Abandonment of the utility and after rebooting I got following messages:

    Error reading registration MFT VOLUME FILE_
    Internal error 25030
    An internal inconsistency was detected
    Ok

    Then two pages of lines BACK describing the situation.
    The PC unbootable.

    Hello

    This first time that perform you the installation of recovery with comes from Toshiba Recovery CD? If this isn't the case, it is the first time that this problem occurred?

  • Re: Failed to start with Satellite L300

    Hello
    I'm on a Toshiba Satellite L300 Windows Vista,
    I recently had my browser (Google Chrome) freeze so that the page that I was on was using Java.
    I went to reset, but once Vista began to start it would not go beyond the loading bar.
    Then, I went to boot from a drive to install Vista and met the same problem.

    I tried to start with the controller Mode SATA changed compatibility.
    This allowed the Vista disc load up successfully but did not allow for options but command prompt and from the Startup Repair.
    I ran Startup Repair twice and that Vista would load to the top of the loading bar then reset and loop this model.
    I don't know where to go from here, but any help would be greatly appreciated.

    Brad Winn.

    Hello

    Perhaps, your laptop is infected with the virus, and you cannot load windows. You can search and find a software like Kaspersky Anti-virus 8.0.0.506 Emergency Bootable CD and search for viruses. I wonder why you could not start Vista drive in AHCI Sata Controller Mode, I know the sata drivers are already integrated into Vista.

    Run "bootsect/nt60 ALL" into the command prompt, and then press ENTER. Wait and eject the Vista disc, reboot. Hope, it helps to have you tried to install from hard drive recovery image?

    Post edited by: jeka-Israel

  • Satellite L300: problems trying to get the CD player work

    Currently, I have a Satellite L300 unit and have problems trying to get my CD drive work.

    Recently, I deleted the cd player, completely by chance instead of a printer.
    Now it won't reinstall and no update driver makes no difference.
    Anyone have any ideas?

    First of all, try to restore Windows back to a Restore Point prior to a date before the problem occurred. System Restore is in the start menu-> programs-> Accessories-> system tools

    Then try to remove the CD/DVD filters in the registry, and then restart. Windows should find the CD Player automatically, unless the registry has been messed up.

    When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  • Re: Satellite L300 - problems after installing Windows 7

    Hello

    I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

    1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

    2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

    P.s. to translate with google

    Thanks in advance
    Patrick

    Hi Patrick,

    To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

    According to your assignment, it seems that you need a driver and you can get all the drivers here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

  • Start secure Satellite L300 problem

    Hi all

    Satellite L300 daughter boot... yet.
    When I try f8, it will beep.
    A cursor appears in the upper left corner of the black screen.
    I can't enter in the configuration advanced with f2 and f12, but I don't know what to do when I'm there.

    The OS is windows 7 and Linux is an option.
    The last time this happened, she has managed to get into Linux to save his work University before she used the recovery CD.
    I have it it to use it only for work etc etc, but she didn't listen...

    Any advice for a fool, please before I go and live somewhere else?

    Thank you

    JWW

    Is the HARD drive recognised properly in BIOS (F2) settings?
    The value of the default BIOS and try again.

    When you start Notepad, enter using F12 BOOT menu and select HARD drive as a boot device, what happens exactly?
    No HDD LED is flashing or not? Is there a any reaction?

  • Registry Satellite L300 problems

    Hello!

    I just bought a laptop Toshiba Satellite L300 CE over 22 months and when I came home I tried to save him but I couldn't.
    So I waited a while because I thought that maybe some technical problems but I cant save it yet.

    IE is already recorded, but next to the said Standard warranty registration is not final.

    What can I do? Thank you!

    Hello

    If you have a European model for Toshiba laptop you can use this page to Toshiba in order to register the warranty:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/services_standard_warranty_eu/

    You can also check this page for information on the warranty for your laptop model:
    http://www.toshiba-tro.de/unitdetails

  • What battery pack comes with Satellite L300 - 17 M?

    Good evening.

    I plan to buy the * Toshiba Satellite L300 - 17 M *.
    Model number: * PSLB0E-06R011G3 *.
    Product page link: [http://eu.computers.toshiba-europe.com/innovation/product/Satellite-L300-17M/1055471]
    Link to the user manual of the product: [http://support1.toshiba-tro.de/tedd-files2/0/userman-en-20080417102004.zip]

    That is, that I could not find any information indicating what battery is supplied in the box with this model,
    i.e. 3 cells / 4-cell / 6-cell and its associated specifications.

    I * + a + * however, able to find what battery packs that are compatible with this model are available as a separate purchase option.

    Any help on this would be greatly appreciated.

    Best regards

    Samuel.

    Hello

    According to the specifications of the laptop on several pages, I found that this laptop comes with a battery 6 cells. I'm sure you can also clarify this with your local dealer too.
    I hope he will confirm my information.

  • Strange screen on Satellite L300 problem

    I have a laptop Satellite L300. Lower third of the screen is gray and the right side of the bottom has third vertical lines of color similar to a bar code on a supermarket product.

    If possible, connect your laptop to external monitor or a television to see if the same appears here.

    If so, this is caused by a faulty graphics card. If not that cell phone s display defective and must be replaced.

  • Upgrade memory on the Satellite L300 problem

    My laptop is a Satellite L300 PSLB8A 047004. I bought a kit of 2 x 2 GB modules and inserted carefully following the instructions (they clicked in place). When the computer reboots, the power light comes on, the fan was on but no other activity and the screen stayed black, no drive activity. Initially, there was 1-off 1 GB PC2 - 6400S installed module, and I checked the news is PC2 - 6400S. I took and put back in but same result. When I put the original module in it worked fine.

    Then I tried one of the new modules instead of lucky one but not original so the original module is now back in and everything seems OK.
    Any suggestions please? If there is damage of module to be managed, then the original 1 GB module should also be damaged, because this is one that s been managed at best.

    KeV.

    This is a typical behavior of compatibility issues. The modules you have, I mean who is the manufacturer?

    I recommend you to use high quality of Kingston or Toshiba products. For more information about compatible modules for your laptop computer, visit http://www.kingston.com/worldwide/default.asp

  • Satellite L300 - problem RAM upgrade video

    I upgraded my new Satellite L300 - 11g of 1 GB to 2 GB and it works fine,

    But the video RAM still 256 MB because it is written in the manual that the video RAM is 384 during the upgrade to 2 GB.

    358 MB total available graphics memory is. This means that the video card can use MB so fine video, but it is not a constant value.

  • Recovery with Satellite C850-B718 problem

    My Satellite C850-B718 fell on some issues. I got it with my recovery disks. The recovery was supposed to be successful. When I restarted the laptop, it still asks me to recover.

    What should I do?

    It is not easy to say what has happened here.
    Please try recovery of your machine once more.

    Have you successfully recovery image installed in the past?

  • Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7

    I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.
    It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart.

    What can I do?

    AFAIK you can't do much.
    Try again and let us know if the same problem occurs again.

  • Satellite L300 - problem with the battery and with the FN keys

    Hello

    Please help me with the following 2 problems:

    1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

    2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

    Thanks in advance for your help.

    (1) install VAP (value added package) and Flash memory card Support utility.
    For example, you can find the driver area L500 software.

    (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
    I switched to Windows 7 and the battery still works fine.

Maybe you are looking for