Convert data from Palm Desktop to Outlook?

Similar Questions

• How to copy the data from Palm Desktop on a PC running Windows 8.1

  If like me you still find the Palm Desktop data (addresses, calendar, notes, etc.) handy and use it long after throwing the combined capacity and 'sync', you can see this is useful.  I bought a new PC running Windows 8.1 and had problems with data transfer due to a problem as I understand it, which does not exist in Windows XP, Vista or 7 versions.  Here is a summary of a way to easily transfer data from these earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) very convenient:

  (1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Give a user name exactly as it exists in the database from your old PC.  This name will serve as Office Automation to create a folder name of six letters (an abbreviated version of your name) to hold the data that Palm Desktop will turn upward.  Wait a few seconds for this to happen, and then close the application on your new desktop.

  (2) in your old PC you want to transfer data from, find the folder named "Palm OS Desktop" which should exist in 'Documents' under path of folder and subfolders 'Users' as > your subfolder name > Documents in Windows 7 (can also be Vista) or may be under "Documents and Setting" folder in Windows XP.

  (3) in this folder "Palm OS Desktop" search this subfolder of six letters of your name and select this whole subfolder and select 'Copy' or Ctrl-C

  (4) locate the same name of subfolder in your new PC (which will have data zero), delete and then 'paste' the subfolder you "copied" in the exact same location.  If you did it right, Viola!  Your new desktop PC should display all the transferred data, once you open the application again.

  Most of the same procedure works with PC Windows 8.1 (probably also Windows 8).  What I found different is that the subfolder of data created under "Palm OS Desktop} had 7 instead of 6 characters with a"0"(zero), added as the last character.  When finally, you copy and paste this subfolder in the new PC there so rename and add "0" for the Palm Desktop to locate these data.

  I hope this helps.

  Data in XP is located in C:\Program Files\Palm (or PalmOne) \ < your HotSync name truncated > \Backup.

  HotSync for Win8 has been available for quite a while now!  See the post at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop" for instructions and driver downloads.

  Palm Desktop 4.x and 6.2.2 use different database formats - 6.2.2 went to .mdb as an extension.

  Best way to migrate data is to perform a HotSync on the new machine, or use the built-in in Palm Desktop Export/Import option.  Export the addresses and calendar files, and then copy those of the new machine.

  The import option to retrieve data.

  WyreNut

• Export from Palm Desktop calendar to .dba archive

  I have data for agenda 2003 to date on my Palm Desktop v6.2.  I would like to archive everything before 01/01/14 by exporting the data in an archive *.dba and then delete the data from Palm Desktop.  The export dialog says that I can choose to archive the items I selected, but does not say how to choose.  I want to select a range of dates - more precisely, 1/1/03-12/31/13.  Someone knows how to do this?

  The Export of Palm Desktop feature, you cannot selectively archive a specific range of dates of the calendar events.  There is a function of the Purge, but he will serve only to items older than a month, not a selectable date.

  One thing you could do, which requires a pocket computer, is to use an application of Pocket called Agenda 6 jointly with a freeware SD card backup utility called NVBackup for more security.  NVBackup lets you back up the entire database because there is at all times on the handheld and allows you to make backup sets so much data that your SD card will hold (max size 1 GB, regular SD card).  And agenda 6 allows you to delete data from calendar before the date.  Then...

  • Export your entire calendar on your desktop.  It would not be limited at all before 01/01/14, but it would preserve everything.
  • Buy and install DateBook 6 of www.pimlicosoftware.com (it is not freeware).
  • Download and install NVBackup.  Run NVBackup on the handheld to create a full backup on a SD card.
  • Then use Schedule 6 to remove the calendar data before 01/01/14.
  • Change the calendar (or calendar) led in Palm Desktop to handheld overrides Desktop.
  • HotSync the handheld to the desktop calendar data.  Palm Desktop calendar data should show then only events for 01/01/14 forwards, but historical data would have been preserved in the file exported as well as on the SD card and you can restore it at any time.

  I hope this helps.

• TestStand database error - error converting data from nchar int type.

  Hello

  I used SQL standards database stored procedure options to store records of my test and I added the generated tables and stored procedures in a database and it seems to work OK in this form. However when I change the UUT_Results table to include a new column that contains the value of the primary key of another table in the database that I meet problems.

  I run a query that returns the primary key value (integer) for a given series number and stores the result as a global station (number format). The correct value is stored in the variable, but when I try to use this value in the stored procedure I get an error like below:

  An error occurred calling "LogResults" in "ITSDBLog" of "ZNIUGOL TestStand database logging"
  An error has occurred by executing a statement.
  Schema: SQL Server Stored Proc (NOR)
  Statement: UUT_RESULT.
  Description: Error converting data from nchar int type.
  Number:-2147217913
  NativeError: 8114
  SQLState: 22018
  Reported by: provider Microsoft OLE DB for SQL Server

  Source: TSDBLog

  My SQL statement for creating the table and the procedure for UUT_results are below:

  ~
  CREATE TABLE UUT_RESULT)
  Uniqueidentifier PRIMARY KEY ID,
  BoardDetailID int,
  STATION_ID varchar (255),
  BATCH_SERIAL_NUMBER varchar (255),
  TEST_SOCKET_INDEX int,
  UUT_SERIAL_NUMBER varchar (255),
  USER_LOGIN_NAME varchar (255),
  START_DATE_TIME is datetime,
  EXECUTION_TIME float,
  UUT_STATUS varchar (32),
  UUT_ERROR_CODE int,
  UUT_ERROR_MESSAGE varchar (255)
  CONSTRAINT UUT_RESULT_FK FOREIGN KEY (BoardDetailID) made REFERENCE BoardDetails)

  ~
  CREATE PROCEDURE InsertUUTRESULT
  @pID uniqueidentifier,
  @pBoardDetailID int,
  @pSTATION_ID varchar (255),
  @pBATCH_SERIAL_NUMBER varchar (255),
  @pTEST_SOCKET_INDEX int,
  @pUUT_SERIAL_NUMBER varchar (255),
  @pUSER_LOGIN_NAME varchar (255),
  DateTime @pSTART_DATE_TIME.
  float of @pEXECUTION_TIME.
  @pUUT_STATUS varchar (32),
  @pUUT_ERROR_CODE int,
  @pUUT_ERROR_MESSAGE varchar (255)
  AS
  INSERT INTO UUT_RESULT (ID, BoardDetailID, STATION_ID, BATCH_SERIAL_NUMBER, TEST_SOCKET_INDEX, UUT_SERIAL_NUMBER, USER_LOGIN_NAME, START_DATE_TIME, EXECUTION_TIME, UUT_STATUS, UUT_ERROR_CODE, UUT_ERROR_MESSAGE)
  VALUES)
  @pID,
  @pBoardDetailID,
  @pSTATION_ID,.
  @pBATCH_SERIAL_NUMBER,.
  @pTEST_SOCKET_INDEX,.
  @pUUT_SERIAL_NUMBER,.
  @pUSER_LOGIN_NAME,.
  @pSTART_DATE_TIME,.
  @pEXECUTION_TIME,.
  @pUUT_STATUS,.
  @pUUT_ERROR_CODE,.
  @pUUT_ERROR_MESSAGE)

  Any help would be appreciated,

  Thank you

  Stuart

  Stuart-

  What is the expression you are evaluating and the data type of the parameter that you defined in the Options database dialog box for the schema that you connect to data with?

• Move the data from Palm Z22 for palm M125

  My Palm Z22 batteries do not hold a charge.  I recently bought a Palm M125, but have been unable to transfer data from the Z22, the M125.  My op system is Windows Vista Ultimate 32-bit Edition processor.  Is it possible to move the data?

  If the Z22 still works, the best way to transfer your data is for her beam to the M125.  At least, for the PIM of Palm of basic data (e.g., calendar, Contacts, memos, to-(tasks)).   On the Z22 in calendar, switch to the display of the day (not the order of the day).  In the menu, select the category of beam, choose the date range and select all from the drop-down list category.  Make sure that receiving IR is selected in the receiving device.  Align them face to face on one foot out and tap the beam.

  In Contacts, select the category in the upper right, then open the Menu and select the category of beam.  Same process for tasks and memos.

  Data and third-party applications might not let u their beam.   In addition, you will a newer device a lot older with an older operating system that may not work new apps.  So, after you transfer your PIM data, try beaming your third-party apps at a time to see if they run again.  The Z22 Launcher screen (at home), open the Menu, and then select the beam.  Highlight apps one at a time and try to beam at the M125.  My guess is that apps like Documents To Go might not even run, if they let u beam, because they were written for the newer versions of Palm OS than what works the M125.

  There is also an upgrade process where you can do this thru Palm Desktop when you switch devices.   But again because once you go towards the back to an older device, there are some compatibility issues with the applications, databases and files of the system, not to mention the questions according to what version you use Palm Desktop.

  Let us know if ensoupler works, or if you encounter any problems, in this case, we can go to the ugrade process.  Also, let us know what version of Palm Desktop you will synchronize with.

• Remove data from Palm address memo from hard drive

  I need to back up and delete my data from my hard drive, so I can send my windows vista computer for repair. I deleted the directory of the user from the directory Palm and palmOne in program files, but the data is always available for Palm Desktop. Where palm Office is finding it?

  Found and stored / deleted. Thank you very much!

  Message relates to: Palm TX

• Z22 all data lost palm desktop Memo / can not recover

  Hello

  When I opened my z22 office program I got an error message saying roughly memo cannot be opened, it may have saved a '.dat' file but I can't find anything.

  None of my memos exist on the desktop anymore, thankfully, they remain on the z22 because it was not plugged in.

  I did nothing different than usual, I have no hotsync etc..

  I use firefox, windows vista home basic sp2 32-bit T1500.

  I tried to open the Palm as an administrator, but it changed nothing.

  Thank you

  Have you tried restarting the computer?

  When a computer malfunctions, there is always a chance that something might go wrong!  I can't guarantee anything across your screen...

  You could try the option "repair" in Palm Desktop.  Go to Tools/Options/tools and use the check now button to see if it can repair damaged databases.

  If it were my PDA, I'll try what I suggested.  If you have another Palm OS device handy, try beaming the data to the other device as a backup before you attempt a HotSync.   Don't forget to put the duct as I mentioned - "Pocket replaces Desktop" for the data you want to transfer.  Do not click the box for "Set as default" - you want this happen only once as a test.

  WyreNut

• Successful HotSync but no information from Palm Desktop.

  Wireless Hotsync "completed", but there is no information in my Palm Desktop, no contact, no notes, no tasks, etc., although this information is in the Palm Pilot. I have Windows 7, 64 bit computer laptop.  HotSync wireless worked well in the past.  Just started this problem a couple of days.  HotSync Manager version 7.0.2.  Palm Desktop version 6.2.2.  I have a backup file on my laptop but don't know how to restore the desktop.  Any suggestions?  Thanks, PNeely

  I suggest you download an extractor free files like 7-zip or WinZip.

  Maybe after installation, any registry that are problems will be straightened.

  WyreNut

• BlackBerry Smartphones transfer data from Palm Tungsten T Blackberry "BOLD"

  The selections are grayed out when I try to use the functionality of the switch in the Blackberry Desktop Manager to copy since the Plam tungsten to the Blackberry with the two connected devices.  What I am doing wrong?

  Thanks for any help.

  linco1

  Thank you all for the quick responses and assistance.  What I've discovered, is that the Blackberry Desktop will not work with any office of Plam after 6.0.1.  I was running Palm Desktop 6.2.  I have uninstall 4.14e 6.2 and installed, that the Balckberry Office recognized and managed to synchronize.

  Thanks again for help.

  -linco1

• convert data from oracle to sql server functions

  In oracle, I get the result.

  floor ((trunc (INF. INFUSION_DTE) - trunc(S.BIRTH_DTE))/365.25) as PATIENT_AGE,)

  example: patient_age is 30

  How to write in sql server, looking for the same result as an oracle.

  CONVERT (VARCHAR (12), t.event_dte, 111) event_dte,.

  CONVERT (VARCHAR (12), p.birthday, 111) anniversary.

  Google is your friend... search for "sql server convert date of birth age" and you will get many examples. And here's one:

  DATEDIFF (hour, p.birthday, t.event_dte) / 8766 as age

  HTH,
  Brian

• How to export my calendar from Palm Zire22 in Outlook?

  I have a Zire22 and would love to export my palm to outlook calendar so that I can use the Palm calendar. I try to export and it registers only as a dba and cannot get it more. Any who, has some ideas. I have the VER Hot sync 6.2

  The article says the utility is called Palm2csv, that I found here using Google.

• Convert data from text file to display for hex UDP transmission controls

  Hello

  I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

  Any help would be appreciated,

  Thank you

  Hi jsrocket,

  the attached example should work as a transformation.

  Mike

• Transfer data from a desktop to a laptop using a Belkin Easy Transfer cable

  I have a desk top XP running. I want to transfer music and pictures to the top of a tower, also using XP. I have a Belkin transfer cable, but it is looking for a computer to run win 7. What should I do?

  Hi CoachWall,

  You can consult the following KB articles and check if it helps:

  How to back up or transfer your data on a Windows computer

  http://support.Microsoft.com/kb/971759

  http://www.Microsoft.com/windowsxp/using/setup/getstarted/bott_fstw.mspx

  Also check out the link from Belkin support and check if it helps:

  Cannot transfer files

  http://en-us-support.Belkin.com/app/answers/detail/A_ID/198

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones move data from Palm Treo 650 to Curve 8330

  When you use the Blackberry Desktop Manager to move my Treo info to my new Blackberry Curve 8330, it sticks to the calendar #256 entry.  I went through some of the pages of tutorial and support of the Web site without success.  Any advice?
  Thank you

  (Palm 4.1.4 version;) BBDesktop version 4.7)

  The problem is that you have an attachment (or more) in the calendar, you must remove the attachment on the calendar.

• How to convert data from XY graph for type ' signal in "for measurement functions

  Hi all, I have a driver file that generates the screenshot XY graph.  I want to measure the period, using the measurement functions in the LabVIEW palette.  Can someone tell me how to convert this type of signal "in".  The X (time) and Y (power) are all there, but it causes an error when I son together?

  Please see my attached code.

  Thank you

  Its ok people, I found a solution.  See attached FYI.