convert from 8.2.1 to 7.1

Similar Questions

• convert from 2013 2012

  no idea how to convert from 2013 in 2012?

  Thank you very much

  In LV2013 file... Except for the previous Version.

  I don't know if this is available for all versions of LV (I Pro). You can also post your vi to the Commission on conversion of version

  http://forums.NI.com/T5/version-conversion/BD-p/VersionConversion

  Ben64

• error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'__Code: UNICOD problem__ MapiMessage message; __message.lpszSubject = _T ("International Translation package Attached"); Error at this stage. ___

  Project is in UNICODE format in VC6.0 MFC on windows XP

  error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'
  Code:

  MapiMessage message;
  message.lpszSubject = _T ("International Translation package Attached"); Error at this stage.

  I would know how can I use MapiMessgae in my program using Unicode.

  Suggest me any change in

  Thank you and best regards,

  Sanjay.

  Hello Sanjay

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/vsexpress

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maintaining links between PDFs converted from source (Word) files

  Hello

  If I have two Word files and manage the links between them (hyperlink on one specific bookmark on the other), is there a way to easily remember (or reproduce) these links on PDF files converted from Word files?

  Here's what I've tested so far.

  -On the source file, the format of the hyperlink is "{filename} .docx #{bookmarkname}. I changed the extension of docx to pdf.

  -Source/target to convert Word files to PDF format.

  -The hyperlink on the converted source PDF is in the format "file:///{targetpath}/{targetfile}%23{bookmarkname"}

  -When I click on the hyperlink on the converted source PDF, security warning pops up with "this document tries to connect to...". »

  -If I click on 'Allow' on the pop-up, the web browser opens with "cannot display this page" error. "

  
  

  I guess that by using the hyperlink is not a viable solution. If the links do not work, do the following manually?

  
  

  - source file Word, remove all hypertext links (because they do not work on PDF even when)

  -convert files to PDF format

  -on target of PDF, the value named destinations on the points corresponding to Favorites
  

  -on the source PDF, find points corresponding to hyperlinks and define the links to destinations named on target PDF.

  
  

  (Actually the situation is more complicated because files are shared at the chapter level and they should be merged for each new version.)

  
  

  If there is a simpler method to achieve this, I would appreciate your help.

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  That's why your problems... You use the PDFMaker plugin, IE the Acrobat Ribbon.

• I'm trying to highlight objects and text in a pdf file converted from a cadd drawing but can't do either?

  I'm trying to highlight objects and text in a pdf file converted from a cadd drawing but can't do either?

  It may be that the PDF file is simply a graph. The highlight tool works on the text, not graphics. You may need to use the marker or another graphic tool.

• paid for my account and impossible to convert from PDF to word

  I have to pay money creates for this?

  Hi its been a year and I still cannot convert from PDF to word and I can't, but I was charged $23,88 again it's my bank statement details

  ADOBE SYSTEMS SOF, 044-207-3650

  My order number is 281076816 please refund the last payment of the 02/11/2015 as I does not approve and stop my subscription

  Thanks Geoff Baker

• Cannot find the boxes with inlay of text that have been converted from Quark

  Hi all.  It's kind of a weird one.  I have a lot of documents that have been converted to different versions of Quark to Indesign CS5.5.  I need to find all the text boxes that have a 0.139 text inset, which seems to be the default for text boxes that have been converted from Quark that have text box.  I'll find/replace, choose the command object and set my search criteria for spacing to insert at 0.139, leaving all other criteria being. He comes back and says no matches found.  If I create a new document and test it, it works fine.  Is there something that I am missing?  What is a "bug" due to a converted Quark document? I tried to uncheck all the attributes object except inset spacing without result.

  Doing this by hand is VERY time consuming as you might imagine.

  Any help would be greatly appreciated.

  The inDesign CS5.5, Version 7.5

  Mac OS x 10.6.8

  Bryan

  I think that your problem is with your conversion unit. 0,0139 inches do not match one point PostScript (it is equal to 1,0008 PostScript points). You should try the same method you were using, but rather try to enter "1 point" as your search query.

• PDF, flattening of dialogue when printing PDFs which is converted from PowerPoint presentations

  When you try to print certain PDF documents that have been converted from powerpoint to PDF, I get a dialogue flattening when printing. This dialogue takes forever and makes it almost impossible to print. I get that this dialogue in Adobe Reader X and that doesn't happen in other players (like FoxIt for example). How can I fix this in Reader X so it can't?

  The process used to convert presentations PowerPoint is to go to record and send, create the document (which opens in word), then save from Word to PDF.

  Thanks in advance!

  The problem is caused by transparent objects. The file must be flattened to print correctly. Player has no option for flattening and not the possibility to save the file in an image format that will ignore the transparent areas, but it can print the file as an image. In the print dialog box click on the Advanced button, and then select 'print picture '.  File will process without any additional latency time and print exactly as it appears on your screen.

• I have 6 profiles but should clean up so I did only 1 'inbox' and 1 'sent' - just converted from Eudora 7 and trying to make the similar user interface.

  I just converted to Eudora paid 7 (after many years) to Thunderbird, due no problems of SSL certificate supported by Eudora.

  So far, I like Thunderbird but tried to imitate the simplest UI for Eudora. In Thunderbird, my 6 profiles are listed, each with its own subfolders «Inbox, drafts, sent, Trash & Archives» There is a long list of menu on the left side of my screen.

  Is there anyway that I can consolidate these profiles so that all incoming messages appear in an Inbox, regardless of the target profile. Similarly, can I consolidate the 'sent' and other subfolders?

  Thanks for any help you can give.

  Dave (Thunderbird newbie).

  lets start terms.

  A profile is something that keeps all your settings of Thunderbird. I think that your calling account profiles. but I could be wrong.

  You have two options here.

  First for POP e-mail accounts, you can use the global Inbox Menu Tools > account settings > server settings > advanced Note that makes the account disappear from the folders pane, so that the messages should be moved to the Inbox of the local folders first.

  For IMAP accounts, there is the unified view of the folders view menu > folders > unified. IMAP accounts can simply not use a record combined due to the synchronization of messages with the server.

  Be very sure of what type of account you set up. IMAP accounts for those who have not used their and aren't aware of the synchronization of emails can be a 'new game '.

• Convert from 5.1 to 2012 to identify - gpib.vi

  Hello

  Could someone please convert the attached VI from Labview 5.1 to Labview 2012. I would greatly appreciate your help.
  Source version: Labview 5.1
  Target version: Labview 2012

  FYI: This Vi identifies all the devices connected to the GPIB bus, using the * IDN? or ID? query. Lists the identification for all instruments in response string. Provides a quick way to see what is there in the GPIB space, without leaving the LabVIEW application
  Source: http://zone.ni.com/devzone/cda/epd/p/id/3759

  Thank you!
  Shah

  PS, sorry for double post under labview subject, but I couldn't find a way to move or delete a post.

  There is a Board for this http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion where you will probably be helped quickly.

• FFT waveform (file converted from Matt file lvm) - how to overcome the error dt < = 0?

  Hello

  I use a lvm file after conversion of Matt file. I wanted to get the fft spectrum. I get this error message this dt waveform<>

  How he overcome?

  I have attached the matte file and the vi that I used.

  Best regards

  FESMI

  The Forum is a bit special files that can be attached. Creating a zip file often works. Sometimes, you can change the .txt extension. If you change the extension, please indicate in your message which was the extension of the moose.

  It seems that data in the file has a time column and a column of amplitude. The LabVIEW waveform data type is a cluster of a table of amplitudes (Y), sampling interval (dt), from the time (t0) and optional attributes. That's what the power spectrum VI requires as input. The t0 values is not used if the default is fine. the value of dt can be calculated by the difference of the two adjacent values in the time column. Given that the first value is equal to zero, the second value is equal to dt.  Use the primitive to build a waveform of the palette of waveform.  Expand it to view the dt element.

  In the VI attached all lines is an indicator that contains your saved default file data. Graph XY plots that data.  After subtracting the way to get rid of a continuous component, the data is converted to a waveform. The power spectrum is calculated and displayed using the same VI as in your program. It also uses extract several Information.vi tone for the frequency and amplitude of the main peaks in the data.

  Interestingly, the lower frequency of the spectrum a harmonic of 60 Hz while the tops are almost sharp space 4 kHz ~ 100 Hz apart.  The broad peak near 2.1 kHz does not seem to have noticeable components to 60 or 100 Hz.

  How to avoid the Type of dynamic data (DDT)? Stop using screw Express! For reasons known only to EITHER screw Express a deliver their outputs via the DDT. Except when you open the block diagram of the express VI, there is no way of knowing what the underlying data structure on a thread of DDT.

  Lynn

• Is it possible that I can read or convert from a floppy midi data?

  Floppy disk

  Vista will not read data Midi from a floppy sequenced on a roland mc 50, purchased in the early 1990s, is there any software that could convert my files so that Vista will read? I have hundreds of songs, I need to back up any help would be appreciated.

  If you connect the player to your PC using a floppy drive cable USB and go...
  Start / computer... is recognized with a drive letter of the floppy drive?

  If_yes_can you make a left click of the letter reader and view the directory
  the floppy?

  These files have an extension .mid?

  Have you tried to copy and paste to a folder on your hard drive?

  FWIW... the Format Factory free software can convert MIDI files
  a digital audio format. WMA or. MP3...

• Burning converted from youtube songs

  I have trouble burning songs that I converted YouTube into mp3 files. they play fine on my windows media player, but does not burn... an error message pops up... something about the media, I don't know... someone can help?

  Hello

  1. What is the full and exact error message?
  2. the problem only occurs for converted music files from YouTube?

  3. How do you try to burn the disc?

  4. you use Windows Media Player to burn the disc?

  Check out the links and check if that helps:

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   

• Android app edition converted from APK?

  Hello

  I'm normally a native Cascades developer and this Android stuff is new to me, so I have a small question.

  If I took an APK for app of my company and converted into a BAR by using an online converter, can I download this version on the supplier portal and release the app? Or y at - it problems with this method?

  I guess I'm worried about what the seller information could be included in the converted bar that I'm not aware of.

  Thank you.

  Hey raffi.

  This would not be an acceptable process. There is information inside the APK that contains data printed from the original (APK) signing keys. If you then sign the application reconditioned with your own signature keys, which can raise a red flag. Download for BlackBerry World probably wouldn't go over well.

  In addition, if you don't have the original signature keys used for the Android app, you will not be able to do an upgrade of the application in the future.

  Justin

• Convert from raw

  I accidentally took photos in Raw with my canon rebel t2i.  Now, I have to convert so I can get them developed.  Struggling to understand this.  Can anyone give me simple instructions.  I'm a tactile learning and reading instructions is so confused thanks in advance

  Get ready.

  Think of Lightroom as you would a darkroom old school; It allows you to 'develop' your RAW images, which are old-school, digital equivalent of photographic negatives. You pull your RAW images in Lightroom and then start tweaking using controls of Lightroom. Thought that the image looked a little too underexposed? Drag the exposure slider to the right.

  Once you have finished 'developing', you export the RAW image in a format that is suitable for its target. (for example, if you intend to show this picture on the Internet, you would use a format such as JPEG).

  Photoshop is a whole other animal. This is the standard de facto image editing. If you're just into straight-up photography, you might never need. If you are at all the creative types to do several layers of composite materials or simply to remove an item from an image, Photoshop is the tool to do it with.

  Photoshop uses a plug-in called Camera Raw to open RAW images as Photoshop cannot open RAW images on its own. Camera Raw workflow is extremely similar to the Lightroom workflow; It "develops" RAW images. I would say that Lightroom is Camera Raw with a fancy graphical user interface, more cataloguing and some other features.

  Some use Lightroom to develop their RAW images, and some use Camera Raw (with Photoshop).

  With all that is said, my suggestion is to start with Lightroom since you talk like you're new to all this. You'll probably want to shoot in a RAW image don't care you and play with the controls of Lightroom to get an idea of what does what.

  Adobe Photoshop Lightroom Help | Lightroom help

  If you have any questions, it is what we are here for.

• Hello! How can I convert a psd files with levels of text in PDFs into editable text? I should be able to edit the pdf files converted (from psd) with adobe reader. Thank you!

  I would like to convert psd to pdf files into editable from the current levels of photoshop text. After that I'll convert psd to pdf, I should be able to open the PDF with adobe reader and change the text.

  If anyone can help me I would really appreciate that cause its really important for me can thought to it.

  Thank you very much!!

  Gaia

  Hi gaiar402796,

  All changes will be possible using Acrobat application.

  Using reader you will not be able to make any changes.

  Kind regards
  Nicos