Convert specific signals from NI Labview vi

Similar Questions

• Version of VI is still too early to convert the last version of LabView

  I get this error when deploying a simple loop VI I try to troubleshoot the symptom of not being able to connect to the remote control.

  I have LabView 2014 SP1 version 14.0.1 installed and that's what I used to build the VI (see attachment).  The version of the software on the cDAQ 9139 I work with ranges from 14.0.1 for real-time 14.2.0 for DAQmx 14.5.0 or Web Application Server.  (See attachment).

  How can we still too early to convert to the current version, if the software LabView 2014 is installed on the cDAQ has VI created in LabView 2014?

  Again, the symptom that I see is "Server does not support remote façade panels" when you try to access the façade of a web browser.   I confirmed by working with our it Department IS not blocking all communication.  The Blue Coat standard software is not installed on the computer, I'm trying to access the Panel of (I also tried to connect to the remote control of my computer at home that has no software IS on it with the same results).  Anything related to the NC was added as exceptions to the firewall.  I have tried a large number of configurations of ports and worked through the troubleshooting list, you can find on NI.com when you search for this error.  There must be something tiny miss me.

  In addition, nobody knows what the two links in the HTML file that is generated when you use the Web publishing tool are supposed to do?  One is a FTP link and the other is a link to the plugins page.

  I took two step forward on this issue.  First of all, I reformatted the hard drive of the cDAQ and reinstalled only most of the software as before, I had been all install available on the host the cDAQ.  This seems to have fixed the error 'version of VI is too early to convert the last version of LabView.  Secondly, I discovered an error in my understanding of the port settings.

  In the configuration of the cDAQ web screen, the web application server is listed as port 8080, by default I believe.

  In the properties cDAQ in the Project Explorer window, the web server has been changed on port 80 to eliminate the need to put in the port number to access the remote control.

  I'm sure it's an assumption on my part, and oblivion, but I thought that those who have the same parameter with just the ability to be set from two different places.

  When I try to access the remote control via the web browser uses the web application server port listed in the views of web configuration, I received the error "server does not support the remote panels.  When I try to access the remote control via the web browser using the port listed in the properties of the CDAQ project for remote control Server Explorer, I could see and interact with the remote control.

  This probably also makes perfect sense now that I understand they serve two different goals, but if you define two ports at the same address, you will get the error "server does not support the remote panels.  Interesting that it always provides the correct html page.

  I am sure it was my problem throughout linked to the issue of the remote control.  I was probably just lucky when I put the Panel remote port server during the initial setup and my luck ran out when I upgraded to LabView 2014.

  Hope this helps people who may have the same assumptions I made.

• How can I restore signal from my Mac Pro to my Viewsonic monitor, connected by VGA?

  I have a Pro Mac OSX version 10.7.5 running. Trendy top is a monitor 24 inch Viewsonic, the only monitor connected. Last week, everything was fine. I stopped him all night and the next morning, when I tried to start, there was no signal from the Mac to the screen.

  The screen displays a 'No Signal' message.

  I checked the entry on the monitor, and it is correctly set to PC.

  The computer starts normally. I can hear him do his thing.

  The monitor starts up normally. No flashing or spots.

  I tried restart, disconnect the monitor from the computer, just stop and unplug it, then reconnected. I tried to plug the old monitor (using VGA connection) and start again, with the same result.

  I tried to recall the NVRAM (found the instructions on this site) and it made no difference.

  It would be appropriate to get a HDMI cable to connect the?

  It seems to me that if the computer does not recognize the monitor, try another cable wouldn't make any difference, but I'm really an 'end user' at this stage and would appreciate any advice.

  Thank you!

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  The VGA input and cable works with another computer/device?

  The port of exit on the Mac works with another monitor?

  What model Mac pro?

  What video card is installed in the Mac?

  What output port are you helping?

  Maybe the video card has failed. If yo have an old Mac Pro with an original which is likely to card

• My p6000 resumes signal from the wireless router. He has worked for months, has left, any help?

  HP Pavilion p6631p

  Windows 7

  I have a slightly new wireless router and the PC is always connected like this, but in the last days he will not pick up any signal from my router or our hot spots of our my touch 4g cell phone.

  It will not work so hard cable...

  Occasionally, he'll go get a weak signal, but I think there out crapped on me, anyone else having this problem?

  Warranty has expired 3 weeks ago! Pissed! I think they do it on purpose.

  If the antenna wire is not damaged or not connected, I would consider looking at an ASUS, Linksys, D-Link or Netgear PCIe x 1 or wireless USB adapter to replace the original one. Here is a selection of Newegg.

• Toshiba 42Z3030D TV not receive signals from the remote control

  I can't use any (Toshiba or the distance from Sky TV) remote on my TV.

  Everything works on the TV when I use the buttons on the side of the TV but the TV does not seem to receive all signals from remote control.

  I changed the batteries in the remotes, and it still does not work.

  Can anyone help please?

  Model: Toshiba 42Z3030D TV

  T couldn't be possible that your TV remote is malfunctioning?
  Maybe you need to replace.

• No Signal from my hp probook 4320 s on TV with the HDMI cable

  Hello, I have a hp probook i3 4320 s, and recently I have buy a new lg led tv, my problem is my new TV can not get the signal from my laptop, please help me, thanks

  Hmmm, if the screen is black no don't say no signal?
  This means that it is signal to the TV, but don't not why I cannot display graphics.

  Refer to:

  http://Windows.Microsoft.com/en-CA/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Then see (in order to please):

  https://sites.Google.com/a/mhelp4u.com/mhelp4u-com/Windows/Windows-7/How-to-scan-for-hardware-changes-using-Device-Manager-in-Windows-7

• How to convert a video from iPhone to a DVD burner

  How to convert a video from iPhone to a DVD burner

  ?

  What, exactly, you try to do? What kind of computer do you have?

  ~ Lyssa

• 4540 s: no Signal from my computer to the TV with a HDMI cable

  No Signal from my computer to the TV with an HDMI cable. What can I do? Windows is up to date! My laptop is Hp4540s, Enterprise 64-bit windows 10

  Hi!, attilak:

  Welcome to Forum!

  (1) try, update of the graphics drivers, of... http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229457&swLangOid=8&swEnvOid=4192

  (2) try to change, by others, the HDMI cable.

• Easy way to convert screw screws from 2012 to 2011

  Community of greetings OR.

  Quick question - I hope so fast - I have written screws in 2012, but some people I work with that ask me to send them in 2011. And I thought you could cut and paste, and unfortunately, I discovered you can do that!

  Is there a way of "back - convert" screw screws from 2012 to 2011 for those who have not upgraded to 2012 yet?

  Thank you!
  TheLT

  File menu, except for the previous version

• When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV.

  moniter and hdmi problems

  When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV. I have a vizio hd tv.

  Hello

  ·         What operating system is installed on the computer?

  Method 1: Follow the steps and check if that helps:

  (a) first of all you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  (b) open the "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  (c) pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Reference: http://windows.microsoft.com/en-US/windows7/TV-on-your-computer-Understanding-TV-signals-and-TV-tuners

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Method 2: updated the graphics card driver and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• convert pilot instr written in labview 5.1 to Labview 8.5

  I would like to convert pilot instr written in labview 5.1 to labview 8.5. Can someone help me with this? The file is attached. Thank you!

  Here, it's like 7.1 that you open.

• TouchSmart 610 unable to receive the signal from the configuration box

  I have HP 610 TV tuner equipped touchsmart all-in-one.  TV work very right up until a few days ago, when I couldn't have a signal from the cable box.  Box has changed and cables without result.  Tried a HDMI cable, but can't find the source selection.  Hung a small tv for the area with a perfect image, so that the excluded the cable/box issue.  Very grateful for any suggestions/advice/help.  Thank you!

  Hi again SuZQT,

  It is good to hear from you!

  To enable your system to receive a signal once more, I recommend you to return your system to a previous restore point before the problem occurred. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• where can I get a video decoder for win xp media center so I can pick up a signal from TV

  I use to be able to pick up a signal from TV, but since a new reinstall of xp media center I can not get a signal - the message says that I need a video decoder, where can I get this article

  Hi davidwiddecombe,
   

  A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding). Some codecs include both components and some codecs only one of them.

  Use your favorite search engine and browse for such a program which is used to.
   

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• 2.4 ghz disabled, try to connect at 5 ghz, no signal from the router

  Tried switching to 5.0 on the 192.168.1.1 page and no I have no signal from my router on any of my devices. Internet is fine.

  one of your devices do see as the 5 GHz listed when you watch SSID? You must get your devices and see if they are capable. otherwise, you won't see even listed

• How to optimize the signal from my router?

  When Im in a room on the ground floor, hence my router is in I can barely get a signal on my iPod Touch and the Xbox!   I was wondering if there is a way to optimize the signal from my router so that I won't have no connection issues... PS.  sometimes resetting the router help, but not as much as I'd like.

  Try these settings.

  Access the routers admin pages.  Connect via a wired computer to 192.168.1.1 with your browser, the empty user name, the password "admin" (everything that you change too).

  Disable UPnP.  Under settings wireless Beacon interval 75, RTS and Fragmentation threshold to 2304.  Try channel 1 or 11.  Save the settings and reconnect.