Coordinates of the cursor - turn off?

Similar Questions

• Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

  The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

  Hi Ed,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 problems on your Windows 7 computer.

  1. The screen turns off when you click with the mouse.
  2. The cursor on the screen disappears while typing.

  Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

  Method 3:

  The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  View the status of the issue. If the problem persists then let know us, we will provide several methods.

• Coordinates of the cursor can be hidden by default?

  I use Acrobat X on Mac running 10.10.4 (also have the new acrobats, but need to X for a legacy plugin that I use). The default cursor coordinates are on and are annoying for my purposes. Any way to have been concealed by default instead of having to hide them manually every time?

  Hi Ana Maria,

  I found the culprit. Besides the legacy plugin I mentioned, I also use Pitstop Pro 13. PitStop has of a feature of the workspace I use, but have not fully explored. I have my normal Pitstop workspace set to load the launch Acrobat and some of its settings include settings Acrobat, not only the parameters of Pitstop. I noticed that the coordinates of the cursor did not show up to some time during the loading of the workspace of Pitstop, and they ceased to appear when I disabled the Pitstop workspace. I searched and included in the settings of the workspace is a framework for the coordinates of the cursor, and it was set on "on". I turned that off and now things work as I want. Sorry I did not notice that there are years when I started using Pitstop, or at least months when we have upgraded to version 13 of Pitstop.

  Thank you for your time. Hope that I did not cause too much frustration while you are looking for a cause/solution in Acrobat X itself.

  

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Satellite M300 display lights then the backlight turns off

  I have a M300 Satellite.
  When I turn on my computer the screen comes on then the backlight turns off.
  Display on an external monitor.
  I have tried funtion buttons, move the screen has no effect.

  Any ideas?

  Hello

  Are you able to increase the backlight using Fn + F7?
  Have you checked the power management option that controls the backlight for the different consumption patterns?
  Will you please do because the power management could lower the backlight to save battery.

  If changing the settings of theses will not help, so I guess FL inverter small failures that may cause this problem.
  In this case that the parts must be replaced

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Anyway continue Voiceover if the screen turns off?

  Hello world

  I use Voiceover to read eBooks for me, but the voice-over goes out once the auto lock turns off the display.

  Is it possible to do the Voiceover to continue even if the screen turns off?

  Thanks for your help!

  Hi Dionysus17,

  AFAIK the only way to solve this problem is to disable the auto-lock on your iPad. To do this, go to settings > General > lock and from here you can choose when you want to stay for before your locks iPad screen.

  Hope this helps,

  Aaron

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• How to obtain the coordinates of the cursor in a field in 3D?

  I have a land in 3D with discrete points. The cursor is indicated and broken so that I can move the cursor to select a point to the nearest point. I was wondering how can I get the coordinates of the cursor in the 3D plot so that I can point to the point (change the size or shape) which the cursor is located. I wasn't able to find coordinates using nodes property. Any suggestions will be appreciated. Thank you.

  Xueliang

  Is this working from home?

  This thread offers advice for hwo to use 3d graphics.

  http://forums.NI.com...=161218#M161218

  This an apperntly has an example to enter the values of the slider.

  http://forums.NI.com...=108612#M108612

  Ben