Copies of images on tape with RMAN
Colleagues dbas,is it possible to create copies of the image of the archivelogs with rman, and store them on tape by specifying the string that is used by RMAN?
AFAIK, it is possible to create copies of the image on disk only. I need these files stored on tape, however and want to avoid backupsets.
If you have an idea as to if it will work, please let me know!
Kind regards
SEB
Hello;
AS a BACKUP COPY can be done on the disc.
Backup of the COPY of the IMAGE cannot be made to the disk. You have no backup copy image on tape.
http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta007.htm#CHDEHBEJ
A copy of the image is an identical copy of the byte to byte in the original file. Copy the image files may not exist on disk.
See - 4.1.2.1 on Copies of the Image - (Oracle 10)
http://docs.Oracle.com/CD/B19306_01/backup.102/b14192/bkup001.htm#i1034275
http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmcncpt.htm#i1006661
See Chapter 5 of the E10642-03 - Sub - "configure the default Type for backups: sets or backup Copies.
Exact quote:
Note: because RMAN can write a copy of only the disk image, the type of backup to tape can be a backup set.
Thus, you can perform the copy and it then backs up to the band as an option.
Best regards
mseberg
Tags: Database
Similar Questions
-
Copies of images do not generate RMAN
Hi all
I configured the backup type by default as image faces below
RMAN > CONFIGURE DEVICE TYPE DISK COPY BACKUP TYPE
2 >.
RMAN old configuration settings:
SET UP THE DEVICE TYPE DISK PARALLELISM 2 COPY BACKUP TYPE.
new RMAN configuration settings:
SET THE TYPE OF BACKUP DEVICE TYPE DISK TO COPY 2 PARALLELISM;
new RMAN configuration settings are stored successfully
from full resynchronization of the recovery catalog
full complete Resync
always backup takes only backup sets not image copies
Please advice how to get copies of the pictures instead of backup sets, below are the backup and list backups
RMAN > backup database copy.
From backup 15 November 11
using channel ORA_DISK_1
using the ORA_DISK_2 channel
channel ORA_DISK_1: from data file copy
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:47
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
continue other job steps, not a not working will not re-run
channel ORA_DISK_1: from data file copy
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
continue other job steps, not a not working will not re-run
channel ORA_DISK_1: from data file copy
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
continue other job steps, not a not working will not re-run
channel ORA_DISK_1: from data file copy
copy the current control file
channel ORA_DISK_2: from data file copy
RMAN-03009: failure of the backup command on the ORA_DISK_2 channel at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
continue other job steps, not a not working will not re-run
channel ORA_DISK_2: from data file copy
RMAN-03009: failure of the backup command on the ORA_DISK_2 channel at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
continue other job steps, not a not working will not re-run
channel ORA_DISK_2: starting full datafile from backup set
channel ORA_DISK_2: specifying datafile (s) in the backup set
including current SPFILE in the backup set
channel ORA_DISK_2: from room 1 to 15 November 11
tag name=/u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T145447_7d5jw867_.ctl output file = RECID = 6 = 767285688 STAMP TAG20111115T145447
channel ORA_DISK_1: datafile copy complete, duration: 00:00:00
channel ORA_DISK_2: finished piece 1 to November 15, 11
piece handle=/u01/app/oracle/flash_recovery_area/APPLE/backupset/2011_11_15/o1_mf_nnsnf_TAG20111115T145447_7d5jw8fq_.bkp tag = TAG20111115T145447 comment = NONE
channel ORA_DISK_2: complete set of backups, time: 00:00:01
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the ORA_DISK_2 channel at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:47
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
RMAN-03009: failure of the backup command on the ORA_DISK_2 channel at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 15/11/2011 14:54:48
ORA-19602: no backup or copy of current file in NOARCHIVELOG mode
RMAN > list of copy.
specification does not match any data file copy in the repository
specification does not match any newspaper archived in the repository
List of Copies of control files
===========================
S time delay key cash YVERT cash
------- - --------------- ---------- ---------------
920 15 NOVEMBER 11 838639 NOVEMBER 15, 11
Name: /u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T145447_7d5jw867_.ctl
Tag: TAG20111115T145447
891. A NOVEMBER 15, 11 838154 NOVEMBER 15, 11
Name: /u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T144236_7d5j5f1d_.ctl
Tag: TAG20111115T144236
872. A NOVEMBER 15, 11 837188 NOVEMBER 15, 11
Name: /u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T141632_7d5gnjx5_.ctl
Tag: TAG20111115T141632
835. A NOVEMBER 15, 11 836343 NOVEMBER 15, 11
Name: /u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T140136_7d5frjxw_.ctl
Tag: TAG20111115T140136
794. A NOVEMBER 15, 11 835524 NOVEMBER 15, 11
Name: /u01/app/oracle/flash_recovery_area/APPLE/controlfile/o1_mf_TAG20111115T134712_7d5dxjpb_.ctl
Tag: TAG20111115T134712
Thanks in advance.
VARATry:
RMAN> list copy;
: p
-
Hello
DB is 9.2.0.7
Operating system is HP - UX 11.23 Itanium
I take daily rman backup of my database as backupsets.
But my leadership asked me: Why can't backups rman as copies of the image.
I told him that.
(a) space the backup can be reduced if one takes the rman backups using backupsets (need to backup only used blocks)
(b) we cannot take images other than disk tape copies
are there other differences hand from above?
Published by: oraDBA2 on May 5, 2009 16:00For copies of images have has several advantages:
Recovery time fastest of all the RMAN Backup Options - (a standard RMAN backup set contains one or more backup pieces, and each of these pieces includes data blocks for a particular data file that is stored in a compressed format. When a data file must be restored, as a result, the entire data file must essentially be re-created from the blocks in the backup piece. Copy of the image already has any physical structure, so it is faster)
Quick backup time
These files can be used in situations of non-RMAN recovery.And you can use them as well as the incremental backups.
But it depends on what problem your management tries to solve with switching of copies of the image?
RMAN cannot write copies of the image directly on tape. You must use a third-party media manager that integrates with RMAN to back up directly to tape. Alternatively, one can save disk and then manually copy the backups to tape.
And aditionaly, depends on your backup strategy. You are only backups nuer or ago additional so. And with the copy of the image, you cannot copy of spfile.
Published by: Laura Gaigala may 5, 2009 16:16
-
Is it possible backup 11g r1 DB and Recover to12c r1 with RMAN?
I'm trying to save the old server to the new.
Is it compatible to migrate Database 11.1.0.6 to 12.1.0.2 with RMAN?
RMAN restore and recover a previous version of backups. See the compatibility matrix RMAN to https://docs.oracle.com/database/121/RCMRF/compat.htm#RCMRF1949
All output data base Oracle can restore backup sets and copies created by any prior release of Oracle Database.
However, in order to open a database, the data must match the version of the Oracle binaries. If you restore and recover a previous version of the database, you will need to update database permission to open it.
RMAN cannot upgrade and migrate a database, but you can use the wizard for DBUA do. I suggest that you only consider this document showing your upgrade options:
http://www.Oracle.com/technetwork/database/upgrade/upgrading-Oracle-database-WP-12C-1896123.PDF
Unfortunately, there is no way to upgrade direct 11.1.0.6 12.1 and you must upgrade the database to 11.1.0.7 first before restoring it. Other options, see the link above.
-
Is it possible backup backupset with rman sbt on disk
Hello
We backup data base of sbt with rman and nmda library (networker).
We want to copy the disk sbt backupset. Is this possible?
Kind regards
William
I remember that this is not possible. It was perhaps possible to redraw the rman backup and restore concepts, but there is probably no real business applications. Remember that a band or an sbt (series tape backup) is a streaming device. You can read from tape or write about a band, but you can't read and write in the same band at the same time. What syntax would you choose to perform an rman backup from tape to disk or tape to tape? Rman backup you can specify a peripheral channel of exit and entry for the use of the restore command. As far as I know, the rman backup source is the database control file and it reads no Ribbon.
-
I started using only bridge on a regular basis (CS6, Mac). Found out that it is downloading multiple copies of images every time I connect to my picture card. Is it a relatively quick way to get rid of these multiple copies?
Hi BudWashington,
Please check the link for the correct workflow below.
How to download pictures from your camera with Adobe Bridge CS4
Kind regards
~ Mohit
-
How to make a backup of the database with RMAN Oracle Single Instance
People,
Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.
I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.
Cold backup is below:SQL > startup
ORACLE instance started.Total System Global Area 538677248 bytes
Bytes of size 2146024 fixed
528482584 variable size bytes
4194304 buffers of data bytes
Redo buffers 3854336 bytes
Mounted database.
Open database.
SQL > shutdown immediate
The database is closed.
The database is dismounted.
ORACLE instance stops.
RMAN > backup database;From backup 25 November 13
using the control file of the target instead of recovery catalog database
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
RMAN-06171: not connected to the target database
RMAN > backup HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 8 file: entry standard
RMAN > backup database HRCS90RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
RMAN-01008: the identifier of the AfDB was: HRCS90
RMAN-01007: line 1 column 17 file: entry standardWhile the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.
My question is:
Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?
Thank you.Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.
For example.
If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.
If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.
-
Hello
We currently use RMAN scripts to back up our 11 GR 2 as Linux RAC databases to ASM. My company is thinking using Netbackup for data backup.
How does the netbackup with rman? One way I can think is RMAN will backup of database in ASM and netbackup will recover backups from the box of ASM and passes it to a remote site (I don't know if netbackup can read ASM).
Are there other ways I can use netbackup with or without RMAN?
Thank you in advance.
No. I say that rreads RMAN frfom of ASM data files and sends them to NetBackup. NetBackup disseminates the incoming bytes on tape.
Hemant K Collette
-
I captured canon hv20 in FireWire to my computer with adobe first elements 11. After the capture, I cut clip three times. Then I want to export my computer due to watching on my 46 inch lcd TV full hd. If I want to keep the quality of the original captured images (from tape), which is the format that I should? I chose mpeg 1440x1080i 24, TI alerts for error. Or I premise avchd 1920 x 1080 p, then it is also more scenes captured. I think it's 20000 MB, scened (without cutting) but captured only 11.2 GB. Please help me. Thank you very much.
I would firstly like to thank you for answering my question. My camcorder is canon hv20 PAL. When I look at the setting of the project, it's HDV 1080i 25 frames per second anamorphic. Duration of the timeline is 56 minutes. I'm sorry about misinformation in an adobe forum. Yes you are right this is not MPEG 1440x1080i 24. I chose MPEG and choose MPEG2 1440x1080i 25 and it convert .m2v file. I couldn't see because Windows media player does not open the m2v files, but I didn't do anything about in order to open the file. I want to learn: my initial project captured is 11.2 GB. But shows on screen m2v files is about 21000 MB. This means that 20 GB! It is same quality my project captured MPEG) and Cup project m2v? What is another way to export? I'm sorry that even once it does not error message about the m2v files. I think I got confused, I think when I chose MPEG, 25 HDTV high quality, I saw the error message but I don't know what is the error message.
-
Based recovery sequence failed with RMAN
I'm on the Oracle 10 g database, recover the database with RMAN, but get the following error:
But the 560 archived log file are:RMAN> RUN { 2> allocate channel c1 device type disk; 3> SET UNTIL SEQUENCE 560 THREAD 1; 4> RESTORE DATABASE; 5> RECOVER DATABASE; 6> ALTER DATABASE OPEN RESETLOGS; 7> } using target database control file instead of recovery catalog allocated channel: c1 channel c1: sid=155 devtype=DISK executing command: SET until clause Starting restore at 17-DEC-11 channel c1: restoring datafile 00001 input datafile copy recid=438 stamp=770148096 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_7DO6D8OH_.DBF destination for restore of datafile 00001: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF channel c1: copied datafile copy of datafile 00001 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF recid=476 stamp=770163113 channel c1: restoring datafile 00002 input datafile copy recid=437 stamp=770148095 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_UNDOTBS1_7DO6GHJM_.DBF destination for restore of datafile 00002: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF channel c1: copied datafile copy of datafile 00002 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF recid=477 stamp=770163125 channel c1: restoring datafile 00003 input datafile copy recid=439 stamp=770148099 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_7DO6FOWS_.DBF destination for restore of datafile 00003: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF channel c1: copied datafile copy of datafile 00003 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF recid=478 stamp=770163150 channel c1: restoring datafile 00004 input datafile copy recid=435 stamp=770148086 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_USERS_7DO6HGMK_.DBF destination for restore of datafile 00004: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF channel c1: copied datafile copy of datafile 00004 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF recid=479 stamp=770163155 channel c1: restoring datafile 00005 input datafile copy recid=434 stamp=770148086 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_EXAMPLE_7DO6GYNZ_.DBF destination for restore of datafile 00005: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF channel c1: copied datafile copy of datafile 00005 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF recid=480 stamp=770163166 channel c1: restoring datafile 00006 input datafile copy recid=436 stamp=770148087 filename=D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_GL_7DO6HKGN_.DBF destination for restore of datafile 00006: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF channel c1: copied datafile copy of datafile 00006 output filename=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF recid=481 stamp=770163171 Finished restore at 17-DEC-11 Starting recover at 17-DEC-11 channel c1: starting incremental datafile backupset restore channel c1: specifying datafile(s) to restore from backup set destination for restore of datafile 00001: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF destination for restore of datafile 00002: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF destination for restore of datafile 00003: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF destination for restore of datafile 00004: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF destination for restore of datafile 00005: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF destination for restore of datafile 00006: C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\GL.DBF channel c1: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_12_15\O1_MF_NNND1_ROLLING_7GNH6QRF_.BKP channel c1: restored backup piece 1 piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_12_15\O1_MF_NNND1_ROLLING_7GNH6QRF_.BKP tag=ROLLING channel c1: restore complete, elapsed time: 00:00:16 starting media recovery archive log thread 1 sequence 564 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.AR C archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.ARC thread=1 sequence=564 unable to find archive log archive log thread=1 sequence=1 released channel: c1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of recover command at 12/17/2011 22:13:22 RMAN-06054: media recovery requesting unknown log: thread 1 seq 1 lowscn 13985223 RMAN> **end-of-file**
Kindly help?RMAN> list copy; List of Datafile Copies Key File S Completion Time Ckp SCN Ckp Time Name ------- ---- - --------------- ---------- --------------- ---- 438 1 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSTEM_7DO6D8OH_.DBF 437 2 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_UNDOTBS1_7DO6GHJM_.DBF 439 3 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_SYSAUX_7DO6FOWS_.DBF 435 4 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_USERS_7DO6HGMK_.DBF 434 5 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_EXAMPLE_7DO6GYNZ_.DBF 436 6 A 17-DEC-11 13763828 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\DATAFILE\O1_MF_GL_7DO6HKGN_.DBF List of Archived Log Copies Key Thrd Seq S Low Time Name ------- ---- ------- - --------- ---- 312 1 556 A 08-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_09\O1_MF_1_556_7G4H1FKL_.ARC 313 1 557 A 09-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_09\O1_MF_1_557_7G4J59WS_.ARC 314 1 558 A 09-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_10\O1_MF_1_558_7G76F9C7_.ARC 315 1 559 A 10-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_11\O1_MF_1_559_7G9SSKC7_.ARC 316 1 560 A 11-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_12\O1_MF_1_560_7GDHDFL2_.ARC 317 1 561 A 12-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_13\O1_MF_1_561_7GH5GDNZ_.ARC 318 1 562 A 13-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_14\O1_MF_1_562_7GKSKNF5_.ARC 319 1 563 A 14-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_15\O1_MF_1_563_7GN3N4HN_.ARC 320 1 564 A 15-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_564_7GS2KRCQ_.ARC 321 1 565 A 17-DEC-11 D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_12_17\O1_MF_1_565_7GSC72RF_.ARC RMAN>
Order now
SQL > alter database open resetlogs;
View the contents of the log file alert if any erros yet.
-
Remove the archivelogs with RMAN
Hello
I usually remove archivelogs with RMAN with command as ' ARCHIVELOG DELETE ALL COMPLETED BEFORE ' SYSDATE - 1' if I have to erase the archivelogs to free the space of FRA.»»
My question is if I delete the archivelogs will it deletes the records in the catalog also (I think) so backed up on tape. In this case the catalogue is not information for these records even if they are on cassettes, correct?
So in the case of collection how can I restore them?
Thank you
Published by: 822424 on May 15, 2011 19:28The catalogue contains information about the backups.
Before you remove the archivelogs, I assume that you have done a BACKUP ARCHIVELOG (or with the database as a BACKUP database PLUS ARCHIVELOG DATA). Therefore, backups are in the BackupSets that are in the catalog.
Hemant K Collette
-
Set - up physical Standby with RMAN
Hello
I took a database, including the archivelogs with RMAN. After 5-6 hours after the end of the backup, I created the primary as on DB standby control file:
rman target $ /.
RMAN > BACKUP CURRENT CONTROLFILE to STANDBY;
Can I use the FULL existing backup to create a standby DB when the standby control file was created several hours later the backup is complete, or do I need to create a new FULL backup?
Concerning
AingleYes,
My experience on Unix is sooner or later, in the absence of a tape library, you find yourself using NFS.
Be aware that this should be the buffer of NFS 3 + and with a reading and writing of 32767octets.Apart from this, the procedure seems OK.
-----------
Sybrand Bakker
Senior Oracle DBA -
How can I export images from Photos with Lightroom or Photoshop?
How can I export images from Photos with Lightroom or Photoshop?
Use the file ➙ export Original unmodified for Photos X menu option.
-
Preview of the scanned image is good but once saved image is black with horizontal lines
My OS is: OSX 10.9.3
I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.
Print is good.
Copy is good.
But now I have some analysis of the issues, probably due to an update of the OS.
Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.
I rumaged through the forums and you have not yet found a solution to my specific machine.
Any help would be greatly appreciated.
Thank you!
Hello
Scan using the software provided as Capture of Image or preview.
The application of scanning HP for your printer is not available to 10.9, you use incompatible software.
Follow these steps to get the results of the analysis required:
http://support.HP.com/us-en/document/c04028214
Shlomi
-
How can I add image 8-bit with 32-bit image in vision assistant
Salvation;
I want to match image 8 bits with a 32 bit image assistant vision. I have a research topic on my doctoral thesis on the treatment of the image and I found a picture on the internet like that but I couldn't solve this problem in vision assistant. I have attached to it. Corresponding to the original image and its State binarize on the same image. Please help me, how can I do?
The proposed script was just erase the area of interest, replace seuillees with zeros pixel. To fill this area with a given color, a possible solution is to invert the mask, it allows to make a new image of the area of binarize, multiply by the chosen color (use a saturated color, otherwise you will get color variations) and add the result to the previous image.
That's what made the attached script.
Maybe you are looking for
-
Display driver for hp split x 2 13-m101se
Hello, I recently bought the hp x 2 13-m101se split. I noticed the battery drain to be fairly high, most after upgrading 8.1 Win. Previous forums were suggestions to turn OFF bluetooth, what I did, and to download the latest drivers from HP display.
-
Satellite A355 NXP FM Tuner v. 1.9 Radio Echo after Vista SP2
I installed the Windows Vista SP2. Now, when I run the utility of Tuner FM NXP v.1.9, radio starts playing after a few seconds of "stuttering". Then, the audio is "echo". In other words, I hear two liable - 2 seconds late on the first. I can't descri
-
Hello! I want to draw great Lorentzian function. Its shape resembles that of a hat if you go high enough powers. Problem is that I can't seem to trace it. I do a simple calculation to calculate the function and use tics of a while loop with levels of
-
Color HP Laserjet Pro 200 M251: HP Laserjet Pro 200 M251nw print pdf with OffBeat foot
Printing documents PFD with the quirky footer al the way to the top. Print the pdf as image only pages, then the foot rest where it belongs.
-
Someone at - he be getting calls from people saying that they are with windows and you click on the Start button and follow their instructions they need or you will lose all computer and all your data?