Based recovery sequence failed with RMAN

Similar Questions

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• Command to fail with RMAN-02001

  Hello world.
  
  I have a command that I want to insert in an RMAN script. It's actually an OS command, you rename a file (the log generated by the script file). Here is the command I use:
  

  RMAN> HOST 'mv /oracle/backup/database_backups/BackupLog/rman_backup.log
  /oracle/backup/database_backups/BackupLog/"rman_backup"`date '+_%Y%m%d_%H%M%S'`".log"';

  When running, it fails with this error:

  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00558: error encountered while parsing input commands
  RMAN-01006: error signaled during parse
  RMAN-02001: unrecognized punctuation symbol "+"

  I tried different qutations to mark this '+' as a special character, but could not find the right way to get rid of the error.
  If someone has already encountered this problem, please let me know how to solve.
  Thank you.

  I know not only why but somehow there was extra space on my previous post. you might try this one?

  HOST 'mv /oracle/backup/database_backups/BackupLog/rman_backup.log /oracle/backup/database_backups/BackupLog/rman_backup`date +_%Y%m%d_%H%M%S`.log';
  

• tape backup fail with RMAN-03002 RMAN-20201 and RMAN-06010

  Hello
  
  My level 0 backup failed over the weekend and I don't understand why. I know I have four data corruption with files, so I put the MAXCORRUPT to 5 for these specific files so the continuous backup to work. This script has completed successfully in the past, and the structure of the database has not changed since the last backup of level 0 has been taken using this script. Here's what I see in my log file that displays the RMAN script, I used to run the backup and the following error messages:
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Sat Apr 18 00:05:24 2009
  
  RMAN > Connect target *.
  2 > run {}
  3 > allocate channel oem_sbt_backup1 type 'SBT_TAPE' format 'SDE_L0_ % %%U s_ t_ ";
  4 > allocate channel oem_sbt_backup2 type 'SBT_TAPE' format 'SDE_L0_ % %%U s_ t_ ";
  5 > the file VALUE of DATA MAXCORRUPT for 112,28,61,43 to 5;
  6 > database backup incremental level 0 filesperset 1;
  7 > archivelog backup all the format "%%U t_ SDE_ARCLOG_" remove entry;
  8 > delete noprompt obsolete recovery window 14 days device type 'SBT_TAPE ';
  9 > output channel oem_sbt_backup1;
  10 > output channel oem_sbt_backup2;
  11 > assign the channel oem_disk_backup1 type disc format ' / u01/app/oracle/controlfilebackups/cf_SDE_%t_%s_%U';
  12 > backup current controlfile;
  13 > output channel oem_disk_backup1;
  {14 >}
  15 >
  connected to target database: MYDATABASENAME (DBID = <>#)
  using the control file of the target instead of recovery catalog database
  
  allocated channel: oem_sbt_backup1
  channel oem_sbt_backup1: sid = 108 devtype = SBT_TAPE
  channel oem_sbt_backup1: NMO v5.0.0.0
  command sent on channel: oem_sbt_backup1
  
  allocated channel: oem_sbt_backup2
  channel oem_sbt_backup2: sid = 159 devtype = SBT_TAPE
  channel oem_sbt_backup2: NMO v5.0.0.0
  command sent on channel: oem_sbt_backup2
  
  executing command: SET MAX CORRUPT
  output channel: oem_sbt_backup1
  output channel: oem_sbt_backup2
  RMAN-00571: ======================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ======================================================
  RMAN-03002: failure of the command set to 18/04/2009 00:05:36
  RMAN-20201: datafile not found in the recovery catalog
  RMAN-06010: error while looking upward of datafile: 112

  DataFile 112 exist?

  See the notes 197932.1 on MOS.

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• Recovery utility fails with a WRONG Machine!

  My Satellite 1415 - S105 had its 20 GB of HARD drive replaced when he died. I replaced by a new bigger 160 GB HARD drive.

  When I tried to restore Windows from CD 3, here's what happens:

  1. I then press C on and C release when the Toshiba logo appears. It starts booting from the CD n ° 1.
  2. starting at Windows 95 comes on the screen
  3. Welcome to the Toshiba Recovery utility... comes on the screen.
  I press F1
  4 bad
  Machine!

  Failed installation aborted/a process!
  A:\ >

  Therefore, it does not.

  How such things ghost 3 CD to restore Windows XP on my new HARD drive?

  I tried this restaurant once that year, on the original 20 GB HDD after I accidentally deleted some important files. The recovery took place normally, read in all the 3 CD and restore the Windows XP ORIGINAL (but I lost my personal files). So, I know that these 3 CD is a collection of work.

  I forgot to add...

  The new 160 GB HARD drive works... I've already put kubuntu 9.10 there and it boots / works fine.

  Now I want to restore Windows XP, so I can have a system dual boot: Linux and Windows

  Thus, the hardware everything works... Just try to convince recovery stuff to work

• RMAN Duplate plan fails with RMAN-06026

  Hello
  
  I have a serious problem.
  
  I copied the binary from target database Oracle and ran adcfgclone.pl dbTechStack and it worked fine.
  
  So I ran the following:
  RMAN catalog target rman/***@catdb sys/***@prod auxiliary sys/***@test
  RMAN > run {}
  until the SNA 5998517700261.
  duplicate target database test;
  }
  
  
  Got the following error message:
  RMAN-03002: failure of Db in dual at 03/08/2010 14:41
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 454 found to restore
  
  
  Please note that the RCS and the backup used is 8 days old (June 26, 10). Also if we use backup and current YVERT today it works well.
  
  Please let me know the possible cause of the error.
  
  Thanks in advance.

  Check with this query when this SCN is generated.

  Select * from $archived_log
  where '5998517700261' between first_change # and next_change #;

  Can be backup was made after that the CHN has been generated.

  Concerning
  Asif kabir

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

• system recovery fails with the C++ runtime error

  My Compaq CQ610-410US Windows 7 running is unusable. When you use the system recovery, either from CD or recovery, it fails with C++ runtime library program not found contact HP support. Whatever it is, Windows is loaded and the system restore screens appear. Once I answer to remove all the accessories it fails with run-time error. Two questions: (1) is there a way around it? (2) get new disks from HP recovery even work?

  All I can suggest is to order a set of HP and I hope they work. This error is not a municipality and the provided HP recovery discs should work.

• RMAN recovery failed with the incarnation of target of error 03002,11003 and recovery 19906 changed during recovery

  Hi all

  I was cloning a Prod DB (Oracle 10.2.0.5) from tape backup. So the cloning is going on it failed with the below error in RMAN:

  archive log thread = 2 sequence 23044 = filename=+DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.848348137

  output channel: ch01

  output channel: ch02

  output channel: ch03

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 23/05/2014 20:15:48

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' +DG_zeus_FRA_01/zeus/archivelog/2014_05_23/thread_2_seq_23044.3558.84

  8348137'

  ORA-00283: cool cancelled due to errors

  ORA-19906: embodiment of changed during recovery recovery targets

  Any possible solution to the resume and cloning complete successfully?

  Kind regards

  Ritu

  incarnation of the list;

  It listed 2 incarnation. I have reset the previous incarnation

  RESET DATABASE TO INCARNATION 2;

  and recovered again and it solved my problem.

  After that added temp files as usual after failing RMAN duplication;

  After this nest of DB and open reset logs.

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 &amp; 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• Restore fails with HP recovery disk. Copy of ordinary details of WIn8 will install OK?

  I have weeks of pain, try to restore a HP Envy m6 that failed a few days outside its warranty.

  I tried to reinstall the original recovery partition and recovery disks burned of the original score of the recovery.

  These two failed with error.  Detect an error in the PININST_BBV

  Diagnostic checks suggest that the hard drive may be faulty, so I have replaced and bought a new set of recovery discs HP who believed HP would solve the problem. However, I get the same error. Detect an error in the PININST_BBV

  Installation in all cases seems to be just fine.

  I strongly suspect the recovery process HP is defective but HP you want to load a 34 books just to talk to someone for a few minutes.

  Anyone know if I can install a regular copy of windows 8 purchased in a retail store instead?

  The product key appears to be buried in the BIOS for the moment and I don't know if that will affect activation if I try to install a non - OEM version

  The answers on the help on the original problem would be greatly appreciated.

  With Windows 8, the product key is embedded in the BIOS and is not visible until you install the operating system. When you use an OEM Windows 8 DVD the BIOS automatically fills in the Code of the key.  You can try to do your own installation of Win 8 media using this ISO download:

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Execution of disaster with RMAN recovery

  Hello
  
  
  http://kamranagayev.WordPress.com/2010/03/29/RMAN-video-tutorial-series-performing-disaster-recovery-with-RMAN/
  
  I want to do the same thing available in the link above. But my ways little different since I use asm as the storage.
  
  
  ex: -.
  
  SQL > select name from v$ controlfile;
  
  NAME
  --------------------------------------------------------------------------------
  +Data/proddb/controlfile/current.258.730005353
  +Arch/proddb/controlfile/current.258.730005353
  
  but my new database server is not configured for asm.
  
  I can do the same thing by changing the path of the path parameter file everything I love in the dr site?
  Or
  I need to create a storage asm for the same thing?
  
  My attempt to base is to check the rman backup on a daily basis by restoring to a separate database.
  
  Any ideas...? can someone give me a help to do this please... If you have any good tutorial as above, please report it here.
  
  
  Thanks in advance,
  Max

  but my new database server is not configured for asm.

  I can do the same thing by changing the path of the path parameter file everything I love in the dr site?
  Or
  I need to create a storage asm for the same thing?

  Do not create instance ASM (also diskgroup). You have full backup, then this means that you can restore this backup to any location and there is no difference restore backup any file system or ASM. Yes as above Hemant mentioned, you can use The VALUE of NEWNAME clause. If you have a lot of data file, then I suggest that you use the DB_FILE_NAME_CONVERT and DUPLICATION of RMAN initialization parameter. But consider now that your database running in the ASM then take full to simple (not ASM) backup file system as BACKUP of DATABASE ARCHIVELOG FORMAT ' / u01/backup/full_ % d_ % u_ .bk %s '; (also take controlfile backup or activate backup AUTOMATIC). Now copy all the backup on the new server and

  /*Restoring spfile*/
  export ORACLE_SID=
  rman target /
  startup force nomount;
  restore spfile  from 'AUTOBACKUP_LOCATION';
  /*After restoring spfile then connect using sqlplus
  and change need parameter like CONTROL_FILES and others
  due to this is not ASM FS and again*/
  startup force nomount;
  restore controlfile from 'AUTOBACKUP_LOCATION';
  alter database mount;
  /*catalog backup*/
  catalog start with 'backup_location';
  /*Now change datafile location*/
  run
  {
  set newname for datafile 1 to 'new location';
  .............................................................
  set newname for datafile n to 'new location';
  }
  restore database;
  switch datafile all;
  recover database;
  alter database open resetlogs;
  

• headers block (block media recovery with rman)

  Hi Im following this tutorial (sound on media with rman block recovery) - im using 11 GR 2 on oel 5.5
  
  http://kamranagayev.WordPress.com/2010/03/18/RMAN-video-tutorial-series-performing-block-media-recovery-with-RMAN/
  
  I created 2 spaces and storage within an array, for example I have a table space called "users02", composed of a data file called "users02.dbf", which currently holds a table called "tbl_test01".
  
  If I query the table to select * from him, he returns the data inside, but when I use the following statement to determine the block header (for the purpose of the tutorial) no row is returned...

  select header_block from dba_segments where segmemt_name='tbl_test01';

  can someone help me on hwo I can find the header of the table,... is block - it possible that segment name is different in the name of the table?
  
  Any help would be appreciated

  806595 wrote:
  Hi Im following this tutorial (sound on media with rman block recovery) - im using 11 GR 2 on oel 5.5

  http://kamranagayev.WordPress.com/2010/03/18/RMAN-video-tutorial-series-performing-block-media-recovery-with-RMAN/

  I created 2 spaces and storage within an array, for example I have a table space called "users02", composed of a data file called "users02.dbf", which currently holds a table called "tbl_test01".

  If I query the table to select * from him, he returns the data inside, but when I use the following statement to determine the block header (for the purpose of the tutorial) no row is returned...

  select header_block from dba_segments where segmemt_name='tbl_test01';
  

  can someone help me on hwo I can find the header of the table,... is block - it possible that segment name is different in the name of the table?

  Any help would be appreciated

  PLS, try:

  select header_block from dba_segments where segment_name='TBL_TEST01';