Copy cashed network profiles

Similar Questions

• Cannot copy the local profile to new account

  I created a new field of W2008 to replace the old W2K domain. I joined the workstation to the new domain.  I've logged on to the new domain with the same local user name.  I'm unable to copy the local profile to the W2K user profile to their new local profile W2008.

  When I consult the list of profiles on the computer, the profile of which I want to copy is listed as "account unknown" and grayed.  I don't have the option "copy in."

  Hi BryanCook270,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Category of the Windows Server

• Network profile

  Currently I have a network created in Public profile, but this network should be under network domain, what do I do to get it under the correct network profile?

  I try to remove the connection and recreate the connection, but still the same.

  Hello

  To configure a computer to a domain, you must change the base type of the network.

  Go to the Control Panel, double-click System, and you will see the place that allows you to change the network.

  http://www.ezlan.NET/Vista/vs-sys.jpg

  Jack MVP-networking. EZLAN.NET

• Windows 7: try to copy a user profile. The 'Copy To' button is always grayed out and the user folder still shows a padlock, regardless of how many times I restart under a different account.

  No matter how many user accounts, I create when I connect to one other user (c:\users\xxxxx) records still show a padlock. My computer was preinstalled and I want to copy the original profile to a new profile of the user.

  Here is a small utility that works perfectly on Windows 7.   The article and the forum have answers for the GRAY "Copy To" button to copy profile.

• Network profile is not displayed

  (1) my networks manage saved a lot of profiles and the laptop connects to the wi - fi in range. But when I go on manage network profiles, that it shows only the current profile I'm connect to. I even tried netsh wlan show profiles and even there, it only shows the current profile.

  (2) recently I had to reset my network and changed the password while keeping the same ssid. Now he add a number after the name 3, while in the profile, it shows without number 3.

  

  can someone help me please to find the hidden profiles.

  Hello

  Please contact Microsoft Community and we offering the opportunity to help you on this question.

  According to the request, I understand that you have problems with the management of your network profiles.

  In order to solve your problem, you can try the following troubleshooting steps:

  These steps are to remove all profiles in your network and will help to create and manage a new network profile.

  • Open the command prompt and remove all the profiles on your computer network.

  You can follow the following instructions on how to delete a network profile:

  To remove multiple profiles on your computer network, type this command in the command prompt:

  netsh wlan delete profile name = "ProfileName".

  You can consult the following Microsoft Help article on how to create a new network profile:

  http://Windows.Microsoft.com/en-us/Windows/create-modify-network-profiles#1TC=Windows-7

  Try the above steps and get back to us.

  Thank you

• I want to copy my Admin profile to the profile of the user, how do I do?

  I installed Windows Seven in my organization. All users have administrator rights, now, I'm going to set up the field and wish to provide all users of the user (not administrator) right. for this, I create a local account with user rights and try to copy the admin profile. Everything will be done successfully, but when I go to log in this account, he refused me saying a group of issues policy...

  Administrator accounts have been created with the surname first name (space) and user accounts have been created with firstname.lastname.
  Y at - it suggestions, how to solve?

  Hi Arvind,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social. .Microsoft.com/ TechNeten/Forums/categories /.

• How can I change IP assignemnts in network profiles in the vRA

  A virtual machine has been provided through a VLAN defined in a network profile. An IP address has been allocated on the virtual computer network profile. All good but VM has then been changed manually to get a new IP and VLAN assigned by replacing the original AVP defined IP and VLAN. Anyone know how I can remove the old IP of the vRA network profile?

  From now on, that we develop a workflow vRO to allow users to perform work to change the custom properties of VM to then change the IP VM in the profile.

  Thank you

  Prestonville

  This isn't official supported, but you can do it in the database of the vCAC (here, through vCO):

  var date   = new Date();
  var query  = "UPDATE [dbo].[StaticIPv4Address]";
  query += " SET [Hostname] = ''";
  query += " ,[VirtualMachineID] = NULL";
  query += " ,[StaticIPv4AddressState] = 1";
  query += " ,[LastModifiedDate] = '" + System.formatDate( date,"yyyy-MM-dd HH:mm:ss" ) + "'";
  query += " WHERE [IPv4Address] = '" + IpAddress + "'";
  query += " AND [StaticIPv4NetworkProfileID] LIKE '" + networkProfile + "'";
  var resultRecords = database.executeCustomQuery( query );
  

  Kind regards

  Markus

• Change the subnet on the network profile

  Hello

  Like a fool I created 3 network profiles and paths using 16 subnets when they should have been 24. I wonder now to open firewall rules to route to other VLANs in 24 of the subnets. As its 16 and the two first parts are identical i.e. 10.2.X.X they don't route through the firewall

  The current VMS I can just go to manually change the subnet assigned to the NIC and they work.

  When I look at a network profile to change the subnet - it is greyed out

  Is there a way I can change this manually? so that the new virtual machines created with / 24 subnet and exisiting VMs I can manually change

  Or is the only way to delete the network profile and start over. How this affect the VMs running other than bulk can try and assign an IP address already in use?

  Thank you!

  You can try to update the database

  Find the name of the profile

  SELECT * from StaticIPv4NetworkProfile

  the name of the profile update

  Update dbo. StaticIPv4NetworkProfile

  Set SubnetMaskIPv4 = "255.255.255.0" where StaticIPv4NetworkProfileName = 'YOUR NETWORK PROFILE'

  Open the database in SSMS (SQL Server Management Studio) and run the SQL query when it is connected to your database of vRA. He has not supported but will most likely solve your problem.

  Or if you are not happy to do this directly through the database, you might try using the vRO vRA plugin and call the vCACEntityManager and update the StaticIPv4NetworkProfiles entity. My guess is the update of the database direct would be easier, but please take a backup and only update the field and nothing else.

• Assignment of IP with vCAC external network profile

  I joined vCAC and NSX, and note that the Service Edge router that gets deployed on a blueprint multi-machine receives 2 IP addresses on its unique "uplink" profile external network interface.  Here is my setup and what is happening.  Any help to understand why this would be useful.  Not a huge deal because it is a learning laboratory, but when I go to implement it in a production environment, I need to know if this is expected behavior, or if something is wrong because it effectively reduces the number of possible networks to deploy-able by half.  Again, not a big problem as this "transport network" (the section between the Edge Gateway manually deployed and dynamic Service Edge routers) will exist entirely in the vSphere environment and can be as big as a class A network, if necessary, it is however a huge waste of space IP I want to solve it if possible.

  Topology:

  I have a NSX Edge and the virtual wire (switch NSX L2) already deployed in the environment.  Within vCAC I have:

  -a reserve related to the dvPortGroup created by the NSX L2 switch

  -an external network profile that is used to configure the port to uplink of dynamically deployed NSX routers edge of Service to connect to the LAN segment between the dynamic ESR and the switch of NSX Edge/L2, already deployed

  -a profile of NAT network 1 number which is used to configure the virtual machines deployed from vCAC plans

  -a vSphere vCAC VM blueprint pointing to a snapshot of a virtual computer within the environment vSphere (linked clone deployment)

  -a plan of multi-machine vCAC which contains the above plan and assigns a network interface to the virtual machine and using the profile of network NAT 1 to configure the IP settings on the virtual machine.  MM master plan contains only a single VM in order to test the dynamic creation of network and IP assignment features/integration between vCAC and NSX.

  Topology resulting, once the virtual computer is deployed:

  Edge (deployed manually) NSX gateway

  v

  v

  NSX L2 Switch/Virtual Wire (deployed manually

  v

  v

  NSX edge router Service (deployed as part of the deployment of the vCAC action plan)

  v

  v

  VM (deployed as part of the deployment of the vCAC action plan)

  In theory what needs to happen is that when I ask a resource of the Architecture SDSE MM:

  1. the ESR is deployed with 2 interfaces: 1 for the external network configured with an IP address available on the corresponding subnet and 1 for internal NAT network configured with the IP address of the default gateway is configured in the profile of NAT network.

  2 NAT rules and treatment of traffic are automatically configured in the ESR

  3. the virtual computer is deployed and configured with a NETWORK adapter with the configurations appropriate IP such as specified in the profile of NAT network.

  
  What is actually happening:
  1. the ESR gets deployed with 2 network cards; 1 NETWORK card for uplink to the external network, which gets 2 IP addresses on the subnet (instead of 1) 13 and 1 NIC for the default gateway of the NAT had network configured with the IP address of the NAT network default gateway.  Steps 2 and 3 still occur.

  Hi Jeremy,.

  It is the expected behavior. If you deploy an edge manually, you will be asked for a 'IP management', and then an IP address for the use of the uplink. It is the second IP source address. If you were to use a NAT, you get an additional IP address for each VM on the NAT's segment.

  See you soon,.

  Grant

• There is no network profile from the drop-down list

  Vcac 6.0.1

  Hello.  I created a network profile and assigned an ip address range.  I am now trying to choose the profile to network within the reserve, and he does not appear.  I select the network in the network tab and then click the menu drop down and there is nothing there.  What I'm missing here?

  Thank you

  Jamey

  What type of network profile you created? I think that if it's something other than external, he will not come unless you have configured VXLAN.

• Machines Linux taking two IPs of network profiles, but enrolling in vCENTER.

  Hi all

  I have 2 problems here with vcac network profiles.

  When I use profiles network with reservations, I'm having windows machines configured right but the machines Linux booking 2 IPs in the network profiles, but registering with the profile of a network. I checked to see if the Linux machines have been set up to have two vNIC, but no. However, I tried to assign network profiles at reserves using the custom property 'VirtualMachine.Network0.ProfileName' and this way, I'm having the same problem as described. But this time for windows and LINUX machines.

  Secondly, I have network profiles configured with mask, gateway, DNS server address, and Suffixes. When my machine is using network profiles, inherit from the shape of the network profile DNS suffix or I have to use the 'VirtualMachine.Admin.NameCompletion' property so that my machine to register in the DNS server.

  vCAC version: 5.2

  Custom spec: using

  Static: Yes

  Appreciate the HELP in advance.

  Nits

  Yes, the Linux machine will inherit the config of NP in the CustomSpec. In addition, if you install the GuestAgent (instead of using the CustomSpec) which will also set the relevant parameters. To do this, the action plan requires that the custom property VirtualMachine.Admin.UseGuestAgent be set to True.

• Problem with external network profile and DHCP

  Hello

  Is it possible to create a network without IP range profile, in order to use the external DHCP protocol.

  If I create a network without ip range profile I got this error when I submit an application VM:

  [catalog] Com.vmware.vcac.platform.rest.client.error.ResponseErrorHandler.handleError:55 - [error rest] ERROR: {status code: 400}, {error code: 42300}, {error Source: null}, {Msg of error: a server error occurred.} Error the applicant unit. {The list of unallocated IP addresses for the network profile (mynetworkprofile) has been exhausted.}, {System Msg: error of Infrastructure service provider}

  I'm sure we can do it, but I don't know how

  Max

  Simply create the profile of any network. Just assign the reservation with the network that you want to use, and the virtual machine will get his IP from the DHCP server.

  vCAC will not be able to manage these addresses because DHCP manages them--if that's what you want to accomplish...

• Unable to assign the IP of network profiles.

  Hello

  I want to activate the user select network based on the network available, chosen in PG when you set a reservation. I use XML to list outside these exchanges but facing problems with it. I use vCAC 5.2 with vSphere 5.5

  The model is configured with a network adapter, keeping in mind that what ever network selected by the user would add to the provisioned VM.

  1. I am able to get the Port Group reflected in vcenter under the network section, but the setting of the virtual machine does not added adapter list. I could see Mac address associated to the Portgroup and allocated IP network profile, but I do not see these values in the VM.

  2 - I custom configured VM from vCAC and added additional NIC with different portgroup who also has associated the different subnet network profile. This time I could see port group reflected in vCenter under network and also the adapter is also added to the VM, but still could not see IP address other APIPA address then. However a single IP address again responsibility network profiles that does not matter where in the VM.

  have I missed something? is there an agent that must be installed on a virtual computer to enable this feature (just a wild guess! )

  Help, please!

  BR,

  MG

  Yes this actually solved the problem, but it's still strange that we need to care about customization in vCenter and reference should be placed in the strategic plan, how construction profile Important in this scenario?

  However, custom, property of "CloneSpec" is not required to mention under properties if you use the field 'customization Specs"of Blueprint.

  This requires no installation of the Agent. It is agentless.

  Thank you

  BR,

  MG

• Failed network profile tab

  Hi Experts

  I installed vcac, but can not find the network profile configuration,

  anyone encountered this before?

  Best regards

  Bai

  Can you check use Static IP is enabled for your site?

  http://www.VMware.com/PDF/Vcac-51-operating-Guide.PDF

  To manage network profiles, select

  Director of business > profiles network in the activity pane.

  To make this option available, a vCAC administrator must have enabled static IP using for your site.

• Thunderbird does not work properly after copying old content profile in the new profile, what can I do

  My old laptop crashed, but fortunately I got the hard drive out, who now works as an external drive. I installed TB on my new laptop computer. I copied the contents of the old file to profile in the new profile file and start of TB. I have all my files of pace, but TB does nog works correctly. After that connection, it takes forever to load the new messages, when I leave a message to another, the first answer I get is "TB not responding' and after a few minutes, I finally get to the next message. Same story with 'reply' or 'delete '. I already tried to delete the index file and have tuberculosis still indexing message folders, but this did not help.

  I noticed that my old profile files seems to have a sort of double files in the subfolder Mail, old accounts. For example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl. I'm not sure what they are (they seem to hold different versions?) or is it relevant?

  When I search the AppData/Roaming/profiles I'll find it (on the old and the new hard disk as well) but I can not navigate on him (some parents of hidden file)? I checked the rights on the files of my account profile (Administrator rights). I don't know what to do more, so I hope to help.

  Re: for example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl.
  Here's the e-mail accounts for pop e-mail account. If you have several addresses on the same server, it will have the same name but an additional example:-1 appended to the name. If you got an e-mail account, it can also create and add the additional number. Why you have several, I can't say with certainty what caused them without knowing what you have done. The point being, you must have the directory Local pointing to one that is correct and has all your existing emails.

  Profile files are hidden files.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  Info on profile:
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  What local directory is set to the e-mail account?
  "Tools" > "Account settings" > "Server settings" for the e-mail account
  bottom right under "Local Directory"
  It will say something like this:
  C:\Users\User account name\AppData\Roaming\Thunderbird\Profiles\abc12345.default\Mail\pop.tele2.nl

  Copy paste the info on this issue, so I don't know which e-mail account you use.

  How many email accounts you listed in the left pane in the account settings? You have just the one pop email account and local folders?

  What antivirus do you use?
  If you McAfee please read;

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  How many emails you have in the Inbox folder?
  It is advisable to use the Inbox folder as a mailbox for incoming mail, and not as a general storage. Suggest you create folders and move all the emails in the Inbox in other appropriate folders, then right-click on Inbox and select "Compact".

  Good info explaining what is compaction and why it is important:

  • https://support.Mozilla.org/en-us/KB/compacting-folders?ESAB=a & s = Compacting & r = 0 & As = s

  It is also a good idea to Archive mail older than a few months.
  Implemented for archive by month and keep the structure of archive folders. These emails will still be visible by 'Archives' folder and in your profile, but check-in will reduce the size of files and therefore less memory use during their opening.
  Info on archiving Options:
  https://support.Mozilla.org/en-us/KB/archived-messages