Problem with external network profile and DHCP

Similar Questions

• problem with the network wifi and bluetooth also having installation problems

  using compaq presario cq43 405au with windows7 32 bit currently... has been formatted before using it. Since the wifi does not rotate, no bluetooth, no attempt to install all the drivers of network on the site but to no avail, a part of the installation was the same nt successful. . (e.g. softpaq does not apply to the system not installed no recovery Manager). I can not install hp Wireless Assistant for a reason, I tried to use the Device Manager option where I can install and update drivers... that too does not work... it's either the driver specific I'm looking is to day or work properly (yet give problems; even after reinstallation or activation) or I just downloaded the driver has not been installed successfully and thus never appears in the menu Manager device. Right now I use an adapter external tp link wifi... Its correctly installed and works very well for access the internet... But I need to get the wifi and bluetooth thing.

  Do I have to reinstall the OS? Maybe because it has not been installed properly during formatting? or what?

  Kindly help.

  Thank you.

  Hello:

  According to the list of parts for your laptop, it has an Atheros wireless with bluetooth card or a wireless card broadcom Bluetooth, so those who are the only two drivers without wireless/bluetooth, you should try.

  It would be better if you knew exactly which Wireless adapter you have, so there is no worry about the bad driver causing the problems.

  http://PartSurfer.HP.com/search.aspx?SearchText=A9L96PA

  HP wireless assistant software is not compatible with your model.

  Your model uses the latest Connection Manager HP software that does the same thing, as does the HPWA software on notebooks.

  This package provides the connection manager HP for the notebook models and operating systems.

  File name: sp54630.exe

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Assignment of IP with vCAC external network profile

  I joined vCAC and NSX, and note that the Service Edge router that gets deployed on a blueprint multi-machine receives 2 IP addresses on its unique "uplink" profile external network interface.  Here is my setup and what is happening.  Any help to understand why this would be useful.  Not a huge deal because it is a learning laboratory, but when I go to implement it in a production environment, I need to know if this is expected behavior, or if something is wrong because it effectively reduces the number of possible networks to deploy-able by half.  Again, not a big problem as this "transport network" (the section between the Edge Gateway manually deployed and dynamic Service Edge routers) will exist entirely in the vSphere environment and can be as big as a class A network, if necessary, it is however a huge waste of space IP I want to solve it if possible.

  Topology:

  I have a NSX Edge and the virtual wire (switch NSX L2) already deployed in the environment.  Within vCAC I have:

  -a reserve related to the dvPortGroup created by the NSX L2 switch

  -an external network profile that is used to configure the port to uplink of dynamically deployed NSX routers edge of Service to connect to the LAN segment between the dynamic ESR and the switch of NSX Edge/L2, already deployed

  -a profile of NAT network 1 number which is used to configure the virtual machines deployed from vCAC plans

  -a vSphere vCAC VM blueprint pointing to a snapshot of a virtual computer within the environment vSphere (linked clone deployment)

  -a plan of multi-machine vCAC which contains the above plan and assigns a network interface to the virtual machine and using the profile of network NAT 1 to configure the IP settings on the virtual machine.  MM master plan contains only a single VM in order to test the dynamic creation of network and IP assignment features/integration between vCAC and NSX.

  Topology resulting, once the virtual computer is deployed:

  Edge (deployed manually) NSX gateway

  v

  v

  NSX L2 Switch/Virtual Wire (deployed manually

  v

  v

  NSX edge router Service (deployed as part of the deployment of the vCAC action plan)

  v

  v

  VM (deployed as part of the deployment of the vCAC action plan)

  In theory what needs to happen is that when I ask a resource of the Architecture SDSE MM:

  1. the ESR is deployed with 2 interfaces: 1 for the external network configured with an IP address available on the corresponding subnet and 1 for internal NAT network configured with the IP address of the default gateway is configured in the profile of NAT network.

  2 NAT rules and treatment of traffic are automatically configured in the ESR

  3. the virtual computer is deployed and configured with a NETWORK adapter with the configurations appropriate IP such as specified in the profile of NAT network.

  
  What is actually happening:
  1. the ESR gets deployed with 2 network cards; 1 NETWORK card for uplink to the external network, which gets 2 IP addresses on the subnet (instead of 1) 13 and 1 NIC for the default gateway of the NAT had network configured with the IP address of the NAT network default gateway.  Steps 2 and 3 still occur.

  Hi Jeremy,.

  It is the expected behavior. If you deploy an edge manually, you will be asked for a 'IP management', and then an IP address for the use of the uplink. It is the second IP source address. If you were to use a NAT, you get an additional IP address for each VM on the NAT's segment.

  See you soon,.

  Grant

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• Problem of external network (Client)

  Hi guys,.

  After the transfer of my "production" environment, I am facing a problem with the external network (not API).

  On my lab environment it works fine, but on the production environment something strange happens: the machine can be put into service, but sometimes he gets 'customization' Openstack, sometimes not.

  Also, when it "works", I can reach a floating IP to one machine, and it works for something like 5 seconds, then this IP stops responding.

  I noticed that my switch TRANSPORT DVS Checkup complains to the VLAN ID 0 (which is not effective in these physical network cards), I use the VLAN ID 102 as the Vlan of Transport VXLAN. Is there something else I'm missing?

  My setup is composed with:

  -1 bunch of Mgmt

  -1 bunch of nova

  -1 bunch of edge.

  They are all on the same Transport area of the NSX, and connectivity to the Openstack API and the Mgmt API now works well I put almost present on 'production' (in fact it is an internal test with some users), but this external network problem is a show-stopper for me

  Thanks for the advice, sorry to bother you with so many questions

  Ah, an offtopic question: when you release the 2.0 version? Is it going to be compatible with the 1.0 version, or I have to remove and reinstall my whole environment? (VMworld, probably?;) (P)

  Thanks again!

  Reading your post, I understand that you have 2 numbers:

  Problem with the metadata service (give the host name):

  Communication to the metadata service works like this:

  

  Can you do some tests for me.

  1 test VXLAN connectivity between the ESXi-Compute (hosting your VM of Instance OpenStack) and the edge of ESXi (hosting your logical shared edge router)

  Ping ++ netstack = vxlan x.x.x.x (to test the connectivity of your IP)

  Ping ++ netstack = vxlan d s 1570 x.x.x.x (to test the MTU on the physical fabric is 1600 or greater)

  Note: x.x.x.x is the remote IP of VXLAN ESXi @.

  If this test does not work, then your VM can speak to its default gateway correctly.

  If this test does NOT work, then it is probably a problem with the physical fabric (VLAN misconfigured or MTU misconfigured).

  2 validate connectivity VLAN between the edge of ESXi (hosting your edge of metadata) and ESXi-Mgt (hosting your LoadBalancer VIO)

  . SSH to the VIO - WHO

  . then make a SSH for balancing load-VIO ssh loadbalancer01

  . can do a ping to Metadata Edge1 ping x.x.x.x (ping should fail, BUT you should see an ARP entry for that IP @: arp - na)

  Note: You can find the Edge Mgt IP metadata @ under edition of the edge metadata_proxy_router_xxx NSX and its uplink interface checking.

  If this test does not work, your edge of metadata can talk to VIO load balancing.

  If this test does NOT work, then it's probably a problem with the Mgt ESXi and ESXi points not to the same port of Mgt group.

  Problem with the external network:

  You validate people can talk to the VM floating IP @?

  If this isn't the case, it is probably because the edge of ESXi (hosting your logical shared edge router) is not on the right VLAN.

  Dimitri

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Problem with access to WV and HAVE

  So I see a few problems with the two Appstacks and writeable volumes in 2.5.0 which I think relate just a matter of what needs to be changed.

  • Writable volumes
    • I have 2 accounts for my account that I attributed an accessible volume writable on a specific system.  When I log in the system in question that subscribe to the Windows profile Service is unable to load.  If I am in the same system with my secondary account on the same system I have no problem.  If I kill the accessible volume writable in the Manager of that then I can login with my account first without problem.
    • I checked that I have no profile on the system, because it is a fresh charge and I use a local administrator account to join to the domain.
  • App stacks
    • If I attached a test battery to a provisioning system and try to install the software I could not create the directory "C:\Program Files (x 86) \Cryptophane" error 5: access is denied.  As soon as I cancel the commissioning Manager of installation of the software is complete without problem.

  The service account, I'm under Manager of appVolumes as the role of the admin

  If I connect to vcenter I can watch the virtual machine and see that the volumes are attached to the virtual machines in question.

  I tried several versions to see if there is something defined in Windows which is causing the problem.

  If a solution has been found.  It turns out a GPO has been the cause of the problem.  Once I added my test machines to an exclusion it resolved the problem.

  The policy in question contains the following settings that were the culprit

  Access to the removable storage / system

  • All removable storage Classes: deny all access-enabled
  • WPD Devices: Deny access read-enabled
  • WPD Devices: Deny access to write-enabled

  Is about to test an App stack, but this seems to be the culprit.

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.