Copy of the files and get the content of the file
So I try to get the content of the file and send through socket.write ().
I'm not entirely sure, If I'm doing this right, but I tried this:
var file = new File( "D:\\test.png" );
var file2 = new File( "D:\\test2.png" );
file.open("r");
file2.open("w");
file2.encoding = file.encoding;
do {
file2.write(file.readch());
}
while ( !file.eof )
test.PNG exist and test2.png is created from scratch. And the files were not the same at the end. Which means that to get the content of the file with file.readch () or file.read () is not the right solution. Right?
So, how can I get the contents of the file in a format that can be sent and, no doubt, rebuilt on the other side?
You could try a binary encoding.
var file = new File( "D:\\test.png" );
var file2 = new File( "D:\\test2.png" );
file.open("r");
file.encoding = 'BINARY';
file2.open("w");
file2.encoding = 'BINARY';
do {
file2.write(file.readch());
}
while ( !file.eof ) ;
file.close();
file2.close();
Tags: Photoshop
Similar Questions
-
Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.
Is there a file .idlk remaining on the server which is not removed properly?
-
Original title: cannot start computer
Cannot start computer
This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?
Hi Dan Maarsman,.-Did you change on your computer before this problem?-Do you have any third party registry cleaner program installed on your computer?Start your computer Safe Mode and check if you can successfully start.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
For more information, see:
-
original title: could not copy files
When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory. How can I fix it?
Hi GloriaZF,
What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.
You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.
I hope this helps.
-
How can I get a copy of the file < windows > \system32\hal.dll.
How can I get a copy of the file
\system32\hal.dll. ? There are 7 possibilities for the hal.dll file and the installation of XP takes the right one to match your hardware during the installation of XP.
That's why replace a bit difficult because you need to know which of the 7 on the XP installation CD you need. You can guess and try things and you might get lucky, or you can try them all. That would take some time and probably be frustrating and you would need a CD bootable XP installation genuine to start the trials and errors.
Replace the hal.dll file becomes even more difficult, because most of the people do not have a genuine XP bootable installation CD, even if they wanted to replace the hal.dll file. If you really want just a copy, you can understand that one you need or just copy the one you already have.
Unfortunately, the Microsoft Answers don't ask for enough information when a new question is asked to provide you with a good idea for your problem not specified. For all that is your problem not specified, you will need to provide additional information.
If you see the message that your hal.dll file is missing or damaged, the chances are that the file is not really missing or damaged... Windows XP just can not find the file.
Fix hal.dll "missing or corrupted" message is usually not too demanding and has nothing to do with the replacement of the file.
Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided.
Please provide additional information on your system:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a CD/DVD drive work?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
What you see you don't think you need to see?
What do not you think that you should see?
If the system works, what do you think might have changed since the last time it did not work properly?
-
When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file." I press the button "Retry" without any result. I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player. I was able to copy these same files to a CD a few days ago. Thanks for the suggestions.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
1. don't you get an error code along with this error message?
2. what CD burning software is installed on your computer?
3. what kind of CD do you use to burn?
4. What is the status of the CD - DVD drive in Device Manager?Method 1.
Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
Reference:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123Method 2.
If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I get the "are you sure you want to copy or move files to this folder.
I get "Are you sure you want to copy or move files to this folder" when I try to mofiles on a file compressed... is there a way I can get rid of this warning that I'm moving hundreds of files (Yes its for a game lol) and it's such a pain to have to do this over and over
Hi, Fayesegaran,
Tools > Internet Options
Click the Security tab
Click the Local Intranet icon
Under automatically detect Intranet network
Ensure that all options are checked
Include all local (Intranet) sites not included does not in other areas
Include all sites that bypass the proxy server
Include all network (UNC) paths
Ensure that automatically detect Intranet network is not checked
Click on the Advanced button
Enter the site in the list and select Add, then OK. You can use a "web site" address as: file://192.172.10.44 when you use the IP address of the local server.
Press ok
Press ok
Press on apply, ok
http://www.faultwire.com/solutions-windows_xp/Windows-security-warning-* 1187.html
-
"The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
Thanks JimOriginal title: the Setup files are corrupted
Hello
1. What is the full/exact error message?
2. When you receive this error message?Follow the steps.Method 1
Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.Step 1
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.Perform the virus scan and make sure that your computer is virus-free.
Method 2:
Run Microsoft Online Scanner.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.Also run a scan complete with Microsoft Security Essentials, check out the link.
http://Windows.Microsoft.com/en-us/Windows/products/security-essentialsFor further assistance, post back with display of the event logs. Check out the link.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Response with more information to help you. -
I got a slideshow of my preschool son and I want to get the pistures of him out of it to share with friends... and fam is there a way I can do this?
You can use copy and paste. Help Windows 7 & support:
Copy and paste a fileWhen you copy and paste a file, you make a copy of the original file that you can then modify independently of the original file. If you copy and paste a file to a different location on your computer, it's a good idea to give it a different name, so that you'll remember which file is new and which file is the original.
To copy and paste a file:
Open the location that contains the file you want to copy.
Right click on the file and then click on copy.
Open the location where you want to store the copy.
Right-click on an empty space within the location and then click on paste. The copy of the original file is now stored in the new location.
For more information about copying multiple files, see select multiple files or folders.
Tips
Another way to copy and paste files is to use the keyboard shortcuts Ctrl + C (copy) and Ctrl + V (paste).
You can also press on and hold the right mouse button and drag the file to the new location. When you release the mouse button, click on copy here.
You can copy and paste a folder in the same way as you would a file. When you do this, all the files in the folder are also copied.
-
Good luck.
-
I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?
If you don't have local copies of your site on your computer...
1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV
2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel
3 when you are prompted to hit "get the entire Site? Yes
4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info
5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel
If you have a site already defined for your old Web host, go to #4 above.
-
Try to import photos from an SD card that worked in the past. First of all, I get an error "the following files could not be imported because they could not be read" with a list of all the files. This includes files I imported successfully into LR in the past (tried as a test, because they did not get caught by the 'new' filter).
So I copied all the images on my HD and tried to import from there and got a different error: "Cannot copy a file to the requested location" for all files.
Parameters: "copy as DNG", "in the subfolder: date: 2012/YYYY-MM-DD".
I am running OSX 10.7.4 and Lightroom 4.1
The files are a mix of JPG, CR2, and MOV
Fixed: in some sort the destination folder got spent in my root my pictures folder HD intstead. WOW! Yay for hidden features
-
All my tabs are missing! Rename and copy/paste the files did not help
I accidentally opened two windows of Firefox and closed one with all my tabs pinned first, then the second tab. After Firefox reload all my tabs are missing and I tried to rename files, copy and paste files, etc. as suggests these forums, but nothing has worked. I have myself screwed on?
Check first the Menu history for any tab restore options.
In the second place.
If you have already restarted Firefox and have a copy of the files: close Firefox- Open the profile folder profiles - where Firefox stores your bookmarks, passwords and other user data
- Save the previous.js recovery.bak and recovery.js under another name
- Place the recovery files in the profile folder.
So that this does not happen again change your tab Preferences and settings or try Session Manager add and save your profile.
-
file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?
FWIW, do not change the extensions of file simply by copying the files to an external drive.
-
Can not good press the mouse on the name of the file and get the option of e-mail
Can not good press the mouse on the name of the file and get the option of e-mail
Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.
I hope this helps!
-
I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?
http://KB.mozillazine.org/Importing_folders
Use this module.
https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/
-
What is this file? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is? osxupdcombo10.10.5.dmg
This is the last update to Yosemite.
If you do not run 10.10.5 then you run to certain security risks.
Maybe you are looking for
-
I don't know if it's actually a Firefox problem, but I was not able to reproduce it in another program. It is not that the graphics are completely lacking, just everything what needs to be visible in my FIrefox window is not, and I can see the same b
-
HP - Pavilion Slimline computer to Desktop - 4 GB memory - 500 GB HDD
I am considering buying the HP - Pavilion Slimline Desktop - 4 GB - HDD 500 GB with windows 8.1 and wonder, this software comes pre-loaded and does have a cd tray / dvd and player? It will play them without buying the windows media pack?
-
I downloaded and installed KB2760411 update five 5 times and I always wonder to install. Is this necessary?
-
Blue screen after Patch Tuesday during HW failure diagnosis
People, I have a HP Pavilion Elite m9357c plus, 6 GB RAM, Windows 7 64-bit edition, with a replaced boot drive (Seagate 1 TB ~1.5 years) and replacemante (Gigabyte with radiator cooling) video card and 1 GB of RAM - also about 1.5 years. System has
-
I have an Evo 510 SFF and when you go to setup (F10) I find that my DVD drive is disabled. I have searched in support but cannot find an answer to this. How can I activate the drive please?