Copy of the slowness of the network

Similar Questions

• Laser jet 1022n print more than 1 copy on the network. o/s win 7 64 bit

  How can I print only 1 copy of a document

  Uncheck the box "Enable bidirectional support" tab of the properties of the printer port.

• HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

  Hello

  We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

  I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

  1. Remote procedure call (RPC)
  2. Shell Hardwarew
  3. Windows Image Acquisition (WIA)

  Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

  All software and drivers are up-to-date by using what has been provided on the HP website.

  The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

  Hi @DocCottle

  Thanks for your response!

  I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

• Slow Yosemite on the network

  After the upgrade of the Mavericks to Yosemite (10.10.5), discovered and navigation in folders are very very slow on the network (such as 2 minutes to perform a search). To access the files on it from another computer is the local computer with Yosemite is not itself slow  I get the MacMini 2012 end with Yosemite since early 2009 iMac running the Mavericks. For the moment, I need to use iWork ' 09, and this is why El Capitan is not used. I saw a few fixes for find slow and record opening in Yosemite, but it only occurs on the network and moved, when we had another filesharing computers (iMac with Snow Leopard worked well and iMac with the Mavericks worked well). Any advice?

  Try disabling "Show icon preview."

  Finder-> display-> display the Options-> [_] preview icon (uncheck it)

• Guest WiFi network much slower than normal on the network

  Speedtests leave a device attached to the 5 GHz wireless guest network are much slower than when the same device is connected to the normal 5 GHz WiFi.

  I measured reproducible all about 7ms 18/10 down on the network of comments and 1ms 320/250 Mbps on the normal network. Same place, same camera, same speedtest app, same test server.

  Similar results of multiple devices (laptop, Windows, iPhone 6 s). No change after a reboot. QoS is off. Firmware is 1.0.6.28_1.1.83.

  What could be the reason? I don't think that I had the same problems a few months ago, but I has not changed settings since then, except for the upgrade of the firmware when a new version appeared.

  Thanks for your advice.

  that version was pulled and pulling FW rarely happens... back having previously worked FW

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• Slow to connect to the network computer.

  C7280 VIA Wired/Ethernet > Linksys wrt54gs i7 Desktop Core 6 GB RAM HP Vista 64-bit wired to the router & Toshiba L305 Core2 Duo 3 GB RAM Vista HP wireless

  I just installed a C7280 with all the bloated SW. Now everything works fine except when I boot the comps. they are very slow to connect to the network.

  Anyone encountered this problem?

  Alternatives?

  Thanks in advance.

  I read in this forum somewhere on a slow startup of PC and internet connection very late after installing the HP software. What has worked for them was to change the Startup Type of the service "Device HP CUE discover the Service" automatic to manual or automatic (delayed start). Why not give that a try.

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

  WHS backup

  You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

  Hello

  Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

• Slow down the response of the printer on the network.

  Whenever I cause any reference to a printer attached to a computer on a wired network the rsponse is very slow. File applications are not affected. I tried to uninstall and reinstall printer drivers, turning off and turn on printer sharing, firewall disable, disable antivirus programs. Both the laptop and the desktop computer have the same opening of session and password Vista Home Premium 32-bit. Sharing is not password protected. Printing from an XP machine on the network seems to be affected. Printing from the computer that the printer is connected is not affected. There was a time that I didn't have this problem. Not sure when it started.

  Mike,

  Having other problems? Remember that if you have installed a software or a hardware when you started having this problem? To resolve this problem, use the tool (SFC.exe) System File Checker.  To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Office 2007 (Word, Excel, Outlook) slow when connected to the network, but fast when not. with windwos vista

  Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  I hope this helps.

• Windows 7 32-bit slow start of blue circle hangs on the network icon in the tray for 10 minutes, some programs don't load until the problem resolves.

  Hello world.

  It will be long and windy.

  I have a problem with my Dell XPS M1530.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. Dell touchpad, magic disc, pda.net and perhaps language bar.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. i.e. open office, cakewalk sonar.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or cervix causing the problem. found nothing.
  • has ran the command cmd, I forgot what's it called some thing/something else. It digitizes and restores the registers according to me. did not help
  • Used pc AVG scanner. then corrected all the errors found and the questions. did not help.
  • reinstalled the network drivers. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the Enigma.

  im running Windows 7 Professional 32-bit. as if lately, about 3 months ago, my laptop started to start slowly and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away like internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a little more resources e.g. cakewalk Sonar. In addition, other startup programs and services such as Dell touch pad, magic disk, PDA. NEt don't start until after the problem goes away. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  Hey Kosmosis,

  I had the same problem, and after fishing trawl through the web to find answers, this is the most reliable solution that I found. At the very least, it will help to determine where the problem is.

  (1) reboot your computer.

  (2) go to Run--> services.msc

  (3) to sort the list by status (click the heading)

  (4) see those blocked at the 'boot '? These are your incriminated objects.

  Apparently, Windows has problems initializing services, and until he solves, or give up, he can't go the rest of the startup procedure. Different people get stuck on different things. For me, it was the 'Server' service as jams it for 20 minutes or more.

  You have 2 options:

  Right click 1)--> properties and change the Startup Type to "automatic (Delayed). This requires to load later, that hopefully allows all the rest at the end of initialization so that you can use the computer first.

  (2) read the Description of the service and see if you can find whats causing it to get stuck. In my case, 'Server' rule of network discovery, file sharing and printing. I realized that I UNPLUGGED a NAS from Buffalo, who worked as a print server as well. My windows was blocked to find a printer on a network that was no longer available. Remove the printer from devices solved the problem.

  If all else fails, you can always try to disable the service. This is probably not the best reccomendation, like its there for a reason, but it might help you to troubleshoot.

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• Explorer slow to load and to fill in the network share files

  We have some Dell OptiPlex SFFs of 960 running Windows 7 Enterprise who have problems with the icons are slow to learn about the network.  As it takes time for all files to load off network/sharing folders and drives.  I did some research on this during more than a week now and can not reach solutions to solve this problem.  Any ideas or information on how to solve this problem would be greatly appreciated.  Also comes with a green loading bar (which takes forever) and the loading circle does not spin.

  Moved files, folders and storage online, web, and networks

  Hello

  As you use Windows 7 Enterprise edition, recommend that you ask your question in the Windows 7 IT Pro TechNet Forums.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.