computer is turned off during the update update wiil not finished

Similar Questions

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• I had to do are install disks initially provided. My computer turns off during the process and did not finish. Info please.

  I had to do a re system install the OEM disks but my computer starts to spin off before the reinstall is complete. As my dischas been reformatted I can't access control panel to reset the timeout settings. Advice please.

  Hello

  You tell us why you had to reinstall.

  If it keeps closing, it looks like you have a hardware problem.

  The OEM recovery disks are provided by your computer manufacturer.

  For problems with their recovery process, you will need to contact them.

  See you soon.

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• My computer has turned off all the themes of Windows 7 except Classic

  original title: My Computer has turned off all the Windows 7 themes. I can only access classic themes. How can I get new themes to return? Thank you

  Hi, my computer is Windows 7 Professional has changed suddenly automatically the Windows Classic theme and all the other themes are grey and not accessible. How can I access the window 7 themes yet. Thank you.

  You can also check in your windows Services and check that the DWM (Desktop Windows Manager) is running.

  Start button > Search > type Services and select.
  Look and to make sure it runs.

• computer won't goto sleep IE screen turns off but the hard drives will not be

  No matter what I put in power options, the computer won't go to sleep.

  The monitor turns off but the hard drives, fan to continue working.

  I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

  The computer turns off when the power off but sleep option does not work.

  Thanks for any help.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may be due to the following reasons:

  -The drivers are not updated.
  -Power option settings are incorrect.
  -The devices connected to the computer are preventing it from going into standby mode.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  https://Support2.Microsoft.com/kb/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• crashed during the update does not start now

  my computer laptop gateway arrested during an update (not sure which). It does not start, I get a file missing or corrupt ntoskrnl.exe error. My repair disc does not work either, I read in the forum vista repair disks are not recognized if you instaledl a service pack. So if this is the case where should I go from here. I would be most grateful for any help. jpshan

  It seems that the update has affected your daughters to start.

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (you may need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  If this does not work, then withdraws EasyBCD http://neosmart.net/dl.php?id=1 and run this process and see that helps.

  If not, then please repost your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where update problems specialists will be happy to assist with the problems you have encountered. Be sure to include the names and numbers KB ALL updates that have been installed before this problem started.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer will turn off when the PXI chassis is turned off

  Hello

  I realized that my computer is shut down properly if I disable my chassis PXI-1036, until the computer is turned off. Is this a normal behaivour?

  As I remember, the chassis PXI-1036 must be turned on until the computer is power on, and I think that maybe on turn it off I have to follow the same procedure.

  Thanks a lot for your advice,

  Hector

  The chassis must be on anytime on the PC is.  Then it turn on before the PC and turn it off after the PC.

  This is because the chassis is an extension of the PC's PCI bus, so he expects everything to be available all the time the PC is powered on, as would be a PCI expansion card.

  -Robert

• Computer turns Off at the start and can not reinstall windows

  Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.

  Please HELP, it's so sad. I will not buy another Windows computer.

  ~ Paul Côté

  For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.

  This isn't their recovery process, Microsoft

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To reinstall from a Microsoft Vista DVD:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To install Ubuntu:

  http://UbuntuForums.org/

  See you soon.

  Mick Murphy - Microsoft partner

• Computer off during the update, now will boot back to the top

  Original title: my grandson turned off my computer in the middle of an update now my computer will not boot even upward.  It says it can not find or is a missing component.  Help

  I have run the diagnosis of auto repair and he said: he can't fix.  It also States that it is running in limited mode when I go to help.  I can not get windows to come on the screen.  When you try to start a blue screen with writing of hot flashes, but it is fast for me to read to see what he says.  I tried everything I know to freeze the screen to see what he says.  I don't know what to do.  Any help, which would therefore never appreciated.  Thank you.

  Hi Wil Lopez,

  ·         This error message do you receive when you try to start in normal mode?

  Follow these methods.

  Method 1: Try to boot using the option 'disable automatic restart in the event of system failure' so that you can see to the bottom of the Blue error screen.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, put the computer in a clean boot State before proceeding with the installation of windows update.

  Note: After installing windows update, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: If the problem still persists, then perform a restore of the system of windows with a disk recovery (winre).

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Laptop screen turns off during an update of the windows system

  Hello world

  I got a new acer laptop with windows 8 last week. Today, there was a small system update that requires a restart of the system to apply the updates. So I restarted my laptop, but I have not seen any sign of update 5 minutes (maybe my internet connection is slow, I don't know...) So (stupidly), I decided to manually cut my laptop and maybe he would return to his State to not update so I might update later. But now the display lights. I can hear the fan working and lights are turning, etc. But I don't see anything. Please help me.

  You are amazing for the quick response. Seriously. I got to the store and they said it had nothing to do with the update or turn off the power. It is the LCD LED screen. It was defective, and I got a new free of charge. Thanks again

• Computer is turned off, online the page in the window is too small. Can not get it back.

  I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also. I tried to adjust it myself, but it changed nothing. The display settings have not changed that I am aware, so with the same settings as always, I didn't really know what to change. I tried to use the system restore, but that never worked when I tried it in the past. Indicates an error has occurred and cannot complete. I'd appreciate any help. I'm an amateur, where computers are concerned, but I can get around pretty good if I have good instructions.   Thanks in advance for any help!

  FYI - HP desktop, Windows Vista, IE8

  You might try to go in the Tools menu in Internet Explorer, then Internet Options, then advanced and select Reset.

  Restores system will fail if you have Norton and do not turn off "tamper protection '.

• Printer e-all-in-one printer 7520 printer turns off during the night

  My printer was initially set up to automatically print multiple daily crossword.  It has worked well for more than a month.  Now the printer stops during the night, and I have to unplug the device and plug it in again so he can print the puzzles.

  Hello DonIriving,

  Welcome to the HP Support forums.  I understand that your Photosmart 7520 stops during the night.

  I've included the document the printer turns off unexpectedly after being inactive for a period of timetroubleshooting.  It will guide you in how to correct this problem.

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck