Copy the old system to ESXi?
Hello I have a slight problem with ESXi...
I want to copy old vmx (Windows Server 2008 + System.vmx team) file to a new system of ESXi.
After some googling, I found on ovfTool. And that I would need to convertfiles.
Now, I have a slight problem. The ovfTool does not work. So I can't try this conversion.
Is someone can please tell me that either have been finding a decent job. (I have read http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_quickstart.pdf) on the old VMwareStasions of loading.
Or how can I do this? Since I kinda need it...
Thank you
Kind regards
Robin
OK, I'm going to assume you are currently on a system of ESXi and want to go to another system of ESXi.
Since you'd already be ESXi on a host, so if you have the storage space, you can use the browser data store to download config as vm and all of its files, store locally and then download them on your new host ESX via the browser to store data again. No other tool would be necessary, but you must have the storage to contain what you need to transfer.
-KjB
Tags: VMware
Similar Questions
-
When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help
Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »
-
Copy the old Time Machine files to the new disk TM
Sorry people, I have to ask two (related) questions:
(1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.
Question: can I copy the old files of Time Machine on my new book?
(2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.
Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?
Thank you very much for your help!
Question: can I copy the old files of Time Machine on my new book?
Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users. The main reasons for this are...
(1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.
(2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.
A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.
Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?
While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.
-
Hello!
Prompt, please, what Firefox versions can be on the old system Windows NT4, thank you.Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME / NT4.
Download here:
FTP://FTP.Mozilla.org/pub/Firefox/rel.../en-us/ -
Can not get ProfileManager to open, despite having followed closely RUN instructions in the HELP section, copy the old backup profile to new computer.
This has happened
Each time Firefox opened
== I had to use a new computer because of the accident on the old.
You don't need to run the Profile Manager to move your profile to a new PC, see this.
http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile -
ESTABLISHING A NETWORK.
My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?Hello
1. don't you make changes on the computer before the show?
2. what version of operating system you are using on the computer?
3. which network you're talking about (home wireless network or group)?
4. which steps have tried?
If you use a group home on the computer, see the link for more information.
Home Sweet homegroup
http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-wayYou can also check out the link.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126Provide us more information for you to help. -
backup of the old system changed the type of operating system installation
After backup all data to your desktop at home and move the backup file on the replacement computer that was running and had been activated, got backup and ran into problems. The original pc was an OEM system with a valid OEM key and had been activated for years. The new system is a renewed system which has an apparently valid cd and COA 'For refurbished computers' active fine and had been restarted several times after activation before the fiasco of the backup.
After that I ran the backup recovery, system was restarted as planned, but when the time came to connect to windows, we encountered a problem of activation. He said that the system should be activated. I went ahead and put in the key that is attached to the system (the key for PC) refurbished, but he would go through. I checked that I read the key from the sticker correctly several times and by two other people. He would not suffer. Just on a chance that the backup of the old system caused a little problem, I tried the OEM key that was on the original system. He's been through.
If the old system should simply be scrapped, I don't think anything, but it will be either made to disadvantaged youth, so I want to make sure that everything is always good about it and it is all above board. In its current form of the key is now on two different systems. What can I do to fix this?
Hello
I suggest you to download the tool to update product key on your system and then update the product key and check. Follow the steps mentioned in the article below.
Update your Windows product key
http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en
If this does not help, then I suggest you to activate by phone and check.
How to activate Windows XP
http://support.Microsoft.com/kb/307890
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
JDBC is not found for the old system
Hi experts,
I connect to existing systems to extract data and for two systems not found no jdbc drivers are...
So, what's my next step, JDBC or JDNI is mandatory?
Pls suggest
ASP.
JDBC drivers are not always required that you have technologies defined in the topology of the ODI that don't use JDBC to connect such as non-relational data such as Hyperion Essbase servers. However, in general JDBC drivers are used for connections to relational technologies.
However, if you do not have the available JDBC drivers it is nothing prevents you from relying on the native utilities from the old systems to access the data in these systems through ODI if available
-
Can I choose the old system of import to Lightroom?
As I prefer the old system of import, am I able to access and use instead a new?
Cliff
Adobe has indicated that in the future releases, the old import dialog box will be present. So at some point, you will be able to download future versions with the old import dialog box.
You do not lose your collections or anything else in changing version of Lightroom to 6.1.1
-
Can I set up a folder with many files and give only a limited number of people access? Just as in the old system.
Hi oliviner,
If you are referring to the workspaces, then yes it is possible but the service will be removed in January 2015
If you are referring to files.acrobat.com, so if you can create folders and put the files into it, but you cannot assign access to specific people as you could in workspaces.
Kind regards
Rave
-
How to generate an automatic employee predefined in the old system?
Hi all
I have a requirement in which there is a separate sequence for employees, contractors and the plaintiffs.
Now the problem is that my client has already set employees with a large number of employees in their old system presets.
My question:
(1) how can I make sure for automatic generation of employee numbers while defining the defintion of BG, IF they want new employee number genertaion in HRMS should not be after their last employee. ? For example, under the old system, they have to say 100 emp with the last emp in 20081. Now in HRMS they want this employee not from 20082, then a sequence later. * 101 th employee aura employee guess 20082 and thus of
(2) for applicants and contractors a separate of footage that should be automatic.
How do I get there?
The pointers in this area will be extremely useful.
concerning
SYou can use a quick formula to do it. I've already implemented it at my client-side.
Oracle provides three fast formula by default which are as follows. Fast formulas must be changed.
1 APL_NUMBER_GENERATION
2 CWK_NUMBER_GENERATION
3 EMP_NUMBER_GENERATIONYou will not be able to access or change this through your responsibility. (check through backend for these names).
For access to this create a personal responsibility (set-up business group), then configure this resonsibilty and then change the text in the quick formula.(1) define the automatic numbering of auto manual
(2) create a sequence for EMP_NUM and CWK_NUM
(3) Create PL/SQL function
(4) to activate the installation companies group
(5) create new responsibility
(6) set values of profile to the level of responsibility
(7) create features of FF
(8) create formulas of FF
(9) to turn off the installation companies group-fast formula code
The DEFAULT for Person_number IS ' '
DEFAULT for Party_ID IS 0
Person_ID for default IS 0
The DEFAULT for National_ID IS ' '
By DEFAULT for Date_Of_Birth IS ' 1900/01/01 00:00:00 ' (date)
By DEFAULT for Hire_Date IS "01/01/1900 00:00:00 ' (date)"THE ENTRIES ARE
Legislation_Code (text),
Person_Type (text),
Person_number (text),
Party_id (Number),
Person_id (Number),
Date_of_birth (date),
Start_date (date),
National_ID (text)Next_number = '0'
Invalid_msg = ' 'If person_type = "EMP" then
(
Next_number = PBSO_PER_NO_GEN2 (Legislation_Code, Person_Type, Person_number, Party_id, Person_id, Date_of_birth, start_date, National_ID)l_mesg = 'Y '.
)
return Next_number-for CWk use person_type = "CWK' etc.
-
importing data from the old system to the new system, key to the raw16 column
Hi, experts,
now I have a new system, the design of the system is to use raw (16) column as the key column in all tables of database.
of course, when the new system goes live (in production), new records of transactions are written to the new database system.
When the new system inserts new records, it manages itself to avoid any conflict of the raw key column value (16)
Now, I'm dealing with this problem:
I need to import data from the old system to the new system, I use sys_guid() to fill the column raw (16) into the new database system.
How can I avoid conflicts of raw column value (16) between the old system data and the new data of database system?
the sql code I write is very simple:
insert into new_sys_table_a (key_column_raw_16,...,...)
Select sys_guid(), old_sys_col_a, old_sys_col_b
of old_sys_table_a;insert into new_sys_table_a (key_column_raw_16, col1, col2 ) select key_column_raw_16, col1, col2 from old_sys_table_a;
-
How can I replace the old system of comments by Disqus?
How can I replace the old system of Business Catalyst with Disqus comments? Help, please
The universal integration for Disqus code is just javascript. You must register for an account on http://disqus.com/for-websites/ and set up your account first. Once you have changed your settings, click on the link 'Install' and which will give you code javascript to add to your pages as well as a few other tips to make it work.
-
I copied the old file of passwords in the new profile, but do not see.
Got a new laptop. Copied the content from the old profile to new profile. Most of the old information are there (bookmarks), but I do not see the passwords. I repeated copying the two files key3db and logins.json specifically, but even the passwords saved on my old profile are not there...
Could you try again in a new profile and copy only the files logins.json and key3db?
Create a new profile as a test to see if your profile is the source of the problem.
See "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.
-
New hard drive. can I copy the old emails and local files from the old hard drive
I installed a larger hard drive in my laptop. I still have the old hdd. Both run on Windows 8. How can I copy all the information like e-mail, files, etc. the old hdd to the new HDD. It is in Thunderbird. Please can someone help me?
Article has step by step instructions.
Where are you stuck?
Maybe you are looking for
-
said that there are 17 thousand gb 10 MB files downloading
When I try to download a file that I know is only 10 MB, it tells me that the download time is 99 days and 3 hours and the file is 17179869184 Go, but download the file quickly anyway
-
Tecra M3 hibernate / standby not always working
My new Tecra M3 can be seasonal - sometimes, it will be extended/upgrade standby standby, other times it won't. Have tried all the settings in XP and Toshiba Power Saver power options (when it is selected as theme in XP energy savings). Clicked Hiber
-
HP pavilion g7-2259nr: Hp pavilion g7-2259nr Windows 7
Hello My girlfriend bought this laptop for me that came with Windows 8.I installed Windows 7 Professional 64-bit (Original), but I have some problems with it. I first noticed windows update continues to operate without finding anything and then I wen
-
I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it
-
During the last two weeks the audio will not play on the computer. I see music or vedio engaged but not his fate. Product name: HP ENVY dv7 Notebook PC Product number: C2Y65AV 64-bit Windows 8 Feature: IDT High Definition Audio CODEC Driver: stwrt64