I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer.

true copy endorsed XP,

I have a laptop of 2005 which came with XP. I lent it to a parent and it came back up. I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer. Because if it can't get the bulk of the safety at work. That is what it is.
Advertisement

Refer to this article to get tips on how to validate your copy of xp.

http://support.Microsoft.com/kb/307890

Tags: Windows

Similar Questions

  • I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges to add this item.

    How do we change privalages

    I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?

    Hello Victor,.

    Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article:
  • I just formatted and reinstalled my machine and now XP tells me that my activation code is invalid.

    The Dell recovery disk comes with the key OEM_SLP from Dell preloaded - there need no input from the user.

    The Dell recovery disk comes with the key OEM_SLP from Dell preloaded - there need no input from the user.

    I'm well aware of that. The "no user input" occurs when the Dell is used on a Dell PC because the SLP routine is dependent on the CMOS chip from the motherboard on the Dell XP installation CD custom and the associated code.

    However, if I understand correctly, you can always use the Dell on a non - Dell PC (problems of licence notwithstanding). But the person would need to use a valid OEM key. Reviewing the report of diagnosis of the OP, it seems that what he was doing (note that the key is NOT one of the "Golden master" Dell keys). And when we run the diagnostic tool, it lists all inconsistencies/anomalies.

    OP wanted to know why he didn't this happen before. Assuming that most of the time everything was the same, my guess is the other time, it had not installed the WGA update, which forced the issue this time.

  • Using every night and compared to IE where I don't have a problem, there are black lines on all the pages of certain facilities of forum. Have screenshot.

    At first, I was told it was my video driver, but maybe it could be the motherboard. However, IE on the same pages of vBulletin does not horizontal black lines thin and thick, as shown in my screen shopt.

    Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • I did a clean habit with a program called BleachBit and others, but in Safe Mode, in order to get more deleted

    I did a clean habit with a program called BleachBit and others, but in Safe Mode, in order to get more deleted. That sure worked before, but now I find that I can not find Freecell or disk cleanup, anywhere on my XP computer. I have SP3, but I don't have the CD from Microsoft. I tried all the answers suggested with no luck. I got an another disk cleanup, which will probably do, but my main concern is the Freecell, it doesn't seem to be any where on the net more. Can you help me please?

    Hello

    I would sugget you follow these steps and see if it helps:

    Method 1:
    Do the product of the steps in this link and check if this may help:
    http://support.Microsoft.com/kb/307768

    Method 2:
    Try the running System File Checker and see if it helps:
    http://support.Microsoft.com/kb/310747

  • I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

    I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

    properly install adobe products.

    at this point, just uninstall cc on your computer, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of office cc, https://creative.adobe.com/products/creative-cloud

    Use the desktop application to install your programs of cc.

  • I reinstalled my OS and now I said that my key is invalid.

    Reinstall MY OS AND NOW IT IS MONTRANT to ACTIVATE U WILL NEED ANOTHER WINDOWS VISTA WINDOWS PRODUCT KEY.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: genuine
    Validation code: 0
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-* - 9KPRJ - 98YVH-RM97W
    Windows product key hash: GC2Kd2XOd5lUxMu3MOqBiFFAcyY =
    Windows product ID: 89571-OEM-7361704-87151
    Windows Product ID Type: 3
    Windows license Type: OEM System Builder
    The Windows OS version: 6.0.6001.2.00010300.1.0.011
    ID: {830BD33D-C45A-493A-9ADC-F8BEC130015B} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows Vista (TM) Starter
    Architecture: 0x00000000
    Build lab: 6001.longhorn_rtm.080118 - 1840
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
    Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {830BD33D-C45A-493A-9ADC-F8BEC130015B}1.9.0027.06.0.6001.2.00010300.1.0.011x 32*-*-*-*-RM97WS-1-5-21-3046964839-3413513689-298036068489571-OEM-7361704-871513KobianPIG31TAmerican Megatrends Inc.. 080014 20081013000000.000000 + 0003D323507018400EA40090409India Standard Time(GMT+05:30)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.0.6001.18000
    Name: Windows Vista Starter edition
    Description: operating system Windows - Vista, channel OEM_COA_NSLP
    Activation ID: 89e51a3c-76c0-4beb-a650-53d34c8f8186
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 89571-00146-617-087151-02-16393-6001.0000-0272012
    Installation ID: 009794103581674682718714166603946196009520954393009531
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
    Partial product key: RM97W
    License status: initial grace period
    Time remaining: 39060 minute (s) on (27 day (s))

    Windows Activation Technologies-->
    N/A

    --> HWID data


    Current Hash HWID: NAAAAAEABAABAAEAAQABAAAAAgABAAEAnJ + EjL5JvkvaZ6p2SOSaM0hF8vTuw5DXrFYqhQ ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1932 101308 APIC
    FACP 101308 FACP1932
    HPET 101308 OEMHPET
    OEMMCFG MCFG 101308
    101308 OEMB1932 LASRYVITRAGE
    GSCI 101308 GMCHSCI
    SSDT DpgPmm CpuPm

    Sorry - my fault - I gave you the instructions for Win7, rather than Vista.

    Please try the steps below to re-create the store with the correct data.

    (1) open an Internet browser window.
    (2) type: %windir%\system32 in the browser's address bar.
    (3) find the CMD.exe file
    (4) make a right click on CMD.exe and select "Run as Administrator"
    (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
    (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
    (7) type: Rename tokens.bar tokens.dat
    (8) type: cd %windir%\system32
    (9) type: net start slsvc
    (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
    (11) restart your computer twice.

    You may need to enter your COA key and activate it.
    Once complete, run another report MGADiag and post back with the results
  • Reinstall my OS and now my Vista product key is not valid.

    Issues Vista product key after re - install.

    I had to reinstall my system and now after 30 days he wants my product key number.

    After entering my key number, the system says that it will not work "with this edition of windows vista."
    I bought this computer at Best Buy already installed in 2007 and he came with an extra disc of Windows Vista installation.
    Why would I now buy a new key, it's not sensible.
    Help, please.
    Thank you.
    Thomas

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
     http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  • I reinstalled Windows Vista and now I can't run "repair your computer".

    I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

    Hello

    Run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the functionality is Gone

    I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the feature disappeared. I had a small icon on the top right of my toolbar. I used it all the time to keep windows separated for financial, plans to travel items, news, etc.. Has it been removed from Firefox?

    Hello

    The feature of tab groups is always present. You can try with the button right of the + after the last tab and Customize. If the icon is hidden behind the other, or if it is available inside the mini window customize, you can put it back. If the problem persists, you can also try of reset toolbars and controls: and start to make changes and restart in Safe Mode screen.

  • I reinstalled windows xp and now I don't have an internet connection. How can I get that back?

    I had to reinstall Windows XP and now my computer won't recognize there is a modem connected to it. I can't find any cd for my modem download all drivers. What can I do now?

    Hello

    You may download the network card drivers from the support page of the computer and install the card.

    In general, http://www.ezlan.net/debug.html

  • I have a new computer with windows 7 and I put as an administrator, but whenever I try to backup to an external hard drive I tells me I don't have permission. How can I fix it?

    I have a new computer with windows 7 and I put as an administrator, but whenever I try to save a file to an external hard disk that is identified on my computer I tells me I don't have permission to back up there.

    You must enter the property of your external drive - see here:
    http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

  • Reinstalled dreamwever cc and now my extensions are not displayed. Any ideas? PS when I open the extensions manager that they are there

    Reinstalled dreamwever cc and now my extensions are not displayed. Any ideas? PS when I open the extensions manager that they are there

    Hi the solution was that I had to reinstall all extensions, then they came. Thank you

    Sincerely

    Dennis Handa

    DHManagement and PR

    www.agentezsite.com

    www.businessezsite.com

    www.flarren.com

    www.keysluxuryliving.com

    321-956-4003.

    2601 Reed Avenue

    Melbourne, Fl 32901

  • Do a right click on desktop freezes computer, Windows explore and Dr. Watson as time stop working. Only Ctrl + Alt + Delete can be used to reset the computer

    original title: right clicking on desktop freezes the computer, Windows explore and Dr. Watson times stop working.  Only Ctrl, Alt, Del to reset computer

    Make a right click on desktop freezes the computer.  Explorer Windows and Dr. Watson stop working. Only Ctrl, Alt, Del restarts computer

    Hi Ken1948,

    1. did you of recent changes on the computer?

    2. you receive the error message?

    3 when was the last time it was working fine?

    Check if the problem persists in safe mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

    Original title: user profile

    My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

    Hello rhunter15,

    There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

    First of all, we run System File Checker to see if you have a corrupt file system.

    • Click Start
    • Click on all programs
    • Click Accessories, and then right-click on the command prompt.
    • Select the Security tab and choose "Run as Administrator"
    • Click on command prompt
    • Type SFC/scannow.

    It will scan and repair any damaged operating system files.

    To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

    KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
    http://support.Microsoft.com/kb/929135

    Once you have finished the clean boot, check again and see if you get the error of parental control.

    If please post again and let us know if that helped pinpoint the problem or if you still need help.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Re: Tecra M5 - cannot use the native screen resolution of my external monito

    Hi, I have a Tecra M5 and just bought a BenQ G2220HD monitor. However, I can't display the native resolution of 1920 x 1080. I guess it's a problem with my video card. If so, can anyone please suggest what video card, I need to buy? Thank you Scott

  • For loops with string

    Excerpt: Labview Developer Suite Sound and Vibration Option 2009 SP1 I need format some number and strings to insert into a txt file using the loop For. This structure above make the service but an empty space when run the outer loop. I need to remov

  • HP Officejet 4500 cartridge alert

    I have a printer HP Officejet 4500 G510n-z, running under Windows 7 64-bit. The printer has been giving me alerts of my being of bundles or tricolor cartridge incorrectly installed (even if it is a cartridge HP Officejet 901 three colors and a new ca

  • The dust bin (icon) removed from the Office folder

    I deleted inadvertently dust bin (icon) file from the desktop. How can I restore it?

  • Bluescreen crashes/reboots

    Hello. I made a post here recently on blue screen crashes and posted my dump file. I was told it was my video drivers causing accidents, I advanced and installed new video drivers, but now I had another accident of blue screen and rebooted itself. He