copyright mark

How do you get an author mark on a keyboard of Compak Presario CQ56?

Hello

First activate the number lock, then hold down the alt key and type 0169 using numbers from the separate numeric keypad (if you have a) or numbers that appear on the letter keys (it may be fake but often m = 0, jkl are 123 etc).  Not to use the numbers that run across the top of the keyboard.

Kind regards

DP - K

Tags: HP Printers

Similar Questions

  • New to DW CS4. General order questions about spacing etc...

    Hi there anyone available to answer a few questions, I have on my model.

    Ive tried alighn the text of navigation (which is down) to the right? any suggestions?

    help.jpg

    It's a little more complicated.  A solution would be to use a table-


           
    Copyright © Mark Salinas 2010. All rights reservedselected works |  Info | Press on. contact

       

    Adjust cell widths as needed.

    The next would be to use floats-


            © Copyright mark Salinas 2010. All rights reserved selected works of |  Info | Press on. Contact

       

    You may need to adjust the widths.

  • Copyright information 5 D Mark III

    Copyright information 5 D Mark III appears in the metadata, but the copyright notice must be enabled manually in photoshop for each file. Is anyway to turn it on with the automatic transmission of copyright within the camera?

    msrtex wrote:

    Copyright information 5 D Mark III appears in the metadata, but the copyright notice must be enabled manually in photoshop for each file. Is anyway to turn it on with the automatic transmission of copyright within the camera?

    I guess that the manual step you mention is to copy the copyright notice to the supplier of Canon to the corresponding IPTC field-specific metadata. The camera is ignorant of the IPTC conventions; so if there is a way to perform the step automatically, I think there should be a setting in Photoshop.

  • Fields of ADF will not be marked as required

    Hello, I have two selectonechoice adf list fields that are unable to be verified as required to ensure that the form is sent, the fields are 'PLACE' and 'TYPE of COMMENT'...

    As you can see in the image, even if the LOCATION is marked required it it never says same thing red in case of OBSERVATION

    Here is my code of the jsp page

    <?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
  <jsp:directive.page contentType="text/html;charset=UTF-8"/>
  <f:view>
    <af:document id="d1" binding="#{backingBeanScope.backing_Test.d1}">
      <af:messages binding="#{backingBeanScope.backing_Test.m1}" id="m1"/>
      <af:form id="f1" binding="#{backingBeanScope.backing_Test.f1}"
               usesUpload="true">
        <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx"
                         id="pt1">
          <f:facet name="center">
            <af:panelFormLayout binding="#{backingBeanScope.backing_Test.pfl1}"
                                id="pfl1">
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s2}" id="s2"/>
              <af:inputDate value="#{bindings.When.inputValue}" label="WHEN"
                            shortDesc="#{bindings.When.hints.tooltip}"                      
                            id="it6" required="true" showRequired="true">
                            <af:convertDateTime pattern="yyyy-MM-dd'T'HH:mm:ss.SSSZ"/> </af:inputDate>
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s1}" id="s1"/>
              <af:selectOneChoice value="#{bindings.Location.inputValue}"
                                  label="LOCATION"
                                  shortDesc="What is your location?"
                                  binding="#{backingBeanScope.backing_Test.soc1}"
                                  id="soc1" showRequired="true"
                                  required="true">
                <f:selectItems value="#{bindings.Location.items}"
                               binding="#{backingBeanScope.backing_Test.si1}"
                               id="si1"/>
              </af:selectOneChoice>
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s3}" id="s3"/>
              <af:selectOneChoice value="#{bindings.Category.inputValue}"
                                  label="OBSERVATION TYPE"
                                  shortDesc="Describe the cause of your observation."
                                  binding="#{backingBeanScope.backing_Test.soc2}"
                                  id="soc2" required="true" showRequired="true">
                <f:selectItems value="#{bindings.Category.items}"
                               binding="#{backingBeanScope.backing_Test.si2}"
                               id="si2"/>
              </af:selectOneChoice>
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s4}" id="s4"/>
              <af:inputText value="#{bindings.Details.inputValue}"
                            label="YOUR OBSERVATION"
                            columns="#{bindings.Details.hints.displayWidth}"
                            maximumLength="#{bindings.Details.hints.precision}"
                            shortDesc="#{bindings.Details.hints.tooltip}"
                            binding="#{backingBeanScope.backing_Test.it3}"
                            id="it3" required="true">
                <f:validator binding="#{bindings.Details.validator}"/>
              </af:inputText>
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s5}" id="s5"/>
              <af:inputText value="#{bindings.Action.inputValue}"
                            label="ACTION TAKEN"
                            columns="#{bindings.Action.hints.displayWidth}"
                            maximumLength="#{bindings.Action.hints.precision}"
                            shortDesc="#{bindings.Action.hints.tooltip}"
                            binding="#{backingBeanScope.backing_Test.it4}"
                            id="it4" showRequired="true" required="true">
                <f:validator binding="#{bindings.Action.validator}"/>
              </af:inputText>
              <af:spacer width="10" height="10"
                         binding="#{backingBeanScope.backing_Test.s6}" id="s6"/>
              <af:inputFile label="CAPTURE"
                            binding="#{backingBeanScope.backing_Test.if1}"
                            id="if1"
                            value="#{backingBeanScope.backing_Test.file}"
                            required="false" showRequired="false"
                            valueChangeListener="#{backingBeanScope.backing_Test.uploadFileValueChangeEvent}"/>
              <af:panelLabelAndMessage label="SUBMITTED BY:"
                                       binding="#{backingBeanScope.backing_Test.plam1}"
                                       id="plam1">
                <af:outputText value="#{securityContext.userName}"
                               binding="#{backingBeanScope.backing_Test.ot1}"
                               id="ot1"/>
              </af:panelLabelAndMessage>
              <af:inputText value="#{bindings.Userid.inputValue}"
                            label="#{bindings.Userid.hints.label}"
                            required="#{bindings.Userid.hints.mandatory}"
                            columns="#{bindings.Userid.hints.displayWidth}"
                            maximumLength="#{bindings.Userid.hints.precision}"
                            shortDesc="#{bindings.Userid.hints.tooltip}"
                            binding="#{backingBeanScope.backing_Test.it1}"
                            id="it1" rendered="false">
                <f:validator binding="#{bindings.Userid.validator}"/>
              </af:inputText>
              <af:panelGridLayout binding="#{backingBeanScope.backing_Test.pgl1}"
                                  id="pgl1">
                <af:gridRow marginTop="5px" marginBottom="5px" height="auto"
                            binding="#{backingBeanScope.backing_Test.gr1}"
                            id="gr1">
                  <af:gridCell marginStart="5px" width="auto"
                               binding="#{backingBeanScope.backing_Test.gc1}"
                               id="gc1">
                    <af:commandButton
                                      text="Submit"
                                      disabled="#{!bindings.Commit.enabled}"
                                      binding="#{backingBeanScope.backing_Test.cb2}"
                                      id="cb2"
                                      action="#{backingBeanScope.backing_Test.cb2_action}"/>
                  </af:gridCell>
                  <af:gridCell marginStart="1px" width="auto"
                               binding="#{backingBeanScope.backing_Test.gc2}"
                               id="gc2">
                    <af:resetButton text="Clear All"
                                    binding="#{backingBeanScope.backing_Test.rb1}"
                                    id="rb1"/>
                  </af:gridCell>
                </af:gridRow>
              </af:panelGridLayout>
              <af:panelGridLayout binding="#{backingBeanScope.backing_Test.pgl2}"
                                  id="pgl2">
                <af:gridRow marginTop="5px" marginBottom="5px" height="auto"
                            binding="#{backingBeanScope.backing_Test.gr2}"
                            id="gr2">
                  <af:gridCell marginStart="5px" width="auto"
                               binding="#{backingBeanScope.backing_Test.gc5}"
                               id="gc5">
                    <af:goLink text="Mail"
                               binding="#{backingBeanScope.backing_Test.gl2}"
                               id="gl2"
                               destination="mailto:noharm@?subject=NOck"/>
                  </af:gridCell>
                  <af:gridCell marginStart="1px" marginEnd="5px" width="auto"
                               binding="#{backingBeanScope.backing_Test.gc6}"
                               id="gc6"/>
                </af:gridRow>
              </af:panelGridLayout>
              <f:facet name="footer">
              </f:facet>
            </af:panelFormLayout>
          </f:facet>
          <f:facet name="header"/>
          <f:facet name="end"/>
          <f:facet name="start">
            <af:group binding="#{backingBeanScope.backing_Test.g1}" id="g1">
              <af:decorativeBox binding="#{backingBeanScope.backing_Test.db1}"
                                id="db1" topHeight="180px">
                <f:facet name="center"/>
                <f:facet name="top">
                  <af:image source="/rsz_noharm.png" shortDesc="NoHarmLogo"
                            binding="#{backingBeanScope.backing_Test.i1}"
                            id="i1"/>
                </f:facet>
              </af:decorativeBox>
            </af:group>
          </f:facet>
          <f:facet name="branding"/>
          <f:facet name="copyright"/>
          <f:facet name="status"/>
        </af:pageTemplate>
      </af:form>
    </af:document>
  </f:view>
  <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Test-->
</jsp:root>

    If you use Jdev 11.1.1.7,

    Uncheck the "Include"No. Selection"Item" in the tab shown in the user interface from the list of values for these attributes.

    See you soon

    AJ

  • Copyright symbol does not come during import

    I use the text copyright symbol on my footers (see below).

    © 2010 century Consultants, Ltd..

    When I import my page/application to another machine, the copyright symbol is messed up and shows like upside down 2 points mark.

    ¿¿Copyright 2010

    Everyone finds a way to get a copyright symbol (text) to work when exporting/importing application or page?

    Thank you

    Bob,

    Here's how I did it in my template footer:

    Copyright © State of
New Hampshire, 2007-2011

    Jeff

  • Help! Copyright symbol does not display correctly!

    Hi, I've just uploaded a site and I have a few problems. The copyright symbol on the footer of every page is like a diamond with a question mark. Then on other pages, as FAQ page for example, the symbols of the ball are displayed correctly, but the em dashes resemble an exclamation mark followed diamond of a G with a tilde under him. What I am doing wrong?

    Check it out here:

    http://www.newenglandadventure.com

    Also, it seems that my foot is broken on a second line. It looks fine in Dreamweaver when I saw the page in a browser, but now it seems that it does not. It might have to do with the copyright symbol, not sure. Please help because I already downloaded the site and I don't want people discovered it messed up as if it was, thank you!

    Hi, the appropriate code to make a copyright symbol can be found on this page:

    http://w3schools.com/HTML/HTML_ENTITIES.asp

    Try this: go to code view and replace things with two diamonds by the entity: ©

    OR

    Try this: in design view, select Insert | HTML | Special characters | Copyright law.

    Initially cut & paste which another program in your web page?

  • maxcorrupt is marked or not marked corrupt blocks?

    Hello

    Documentation says:

    "You can use the SET MAXCORRUPT command to set the total number of * not * corruptions permitted in a file for RMAN backups." The default value is 0, which means that RMAN does not tolerate corrupt blocks trivialized whatsoever.

    If the MAXCORRUPT limit is exceeded when RMAN meeting marked a * non * corrupt block during a backup, then RMAN terminates the backup. Otherwise, RMAN writes the corrupt block newly detected at the backup with a special header that indicates that the block is marked corrupt. »

    So, I did the following test:
    backup database and everything is correct, no corrupt blocks.
    corrupt a block using "dd".
    backup database and is not caused by the corrupted block.
    Make sure that the block is marked as corrupted.
    Try saving again, but it fails when it is supoused to work because the block is marked as corrupted.
    The only way to save the database uses "maxcorrupt.

    The documentation is wrong or I'm doing something wrong?

    Test case:
    #/home/oracle> rman target /

Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:42:01 2010

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: O11R2 (DBID=3441786850)

RMAN> backup database;

Starting backup at 14-MAY-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=33 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf
input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf
input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf
input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf
input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf
input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_nnndf_TAG20100514T114210_5yt6qmhm_.bkp tag=TAG20100514T114210 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:03:02
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114210_5yt6xc21_.bkp tag=TAG20100514T114210 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 14-MAY-10

RMAN> exit


Recovery Manager complete.
#/home/oracle> dd if=/dev/zero of=users01.dbf bs=8k conv=notrunc seek=526 count=1  
1+0 records in
1+0 records out
8192 bytes (8.2 kB) copied, 0.00570121 seconds, 1.4 MB/s
#/home/oracle> rman target /

Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:46:12 2010

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: O11R2 (DBID=3441786850)

RMAN> backup database;

Starting backup at 14-MAY-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=44 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf
input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf
input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf
input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf
input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf
input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:46:26
ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114619_5yt6zmxp_.bkp tag=TAG20100514T114619 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================

RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:46:26
ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf

RMAN> exit


Recovery Manager complete.
#/home/oracle> sqlplus system/oracle

SQL*Plus: Release 11.2.0.1.0 Production on Fri May 14 11:46:38 2010

Copyright (c) 1982, 2009, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Oracle Label Security, Oracle Database Vault and Real Application Testing options

SQL> select * from V$DATABASE_BLOCK_CORRUPTION;

     FILE#     BLOCK#     BLOCKS CORRUPTION_CHANGE# CORRUPTIO
---------- ---------- ---------- ------------------ ---------
         4        526          1                  0 ALL ZERO

SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Oracle Label Security, Oracle Database Vault and Real Application Testing options
#/home/oracle> rman target /

Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:47:04 2010

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: O11R2 (DBID=3441786850)

RMAN> exit


Recovery Manager complete.
#/home/oracle> rman target /

Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:47:34 2010

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: O11R2 (DBID=3441786850)

RMAN> backup database;

Starting backup at 14-MAY-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=47 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf
input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf
input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf
input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf
input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf
input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:48:50
ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114848_5yt743qq_.bkp tag=TAG20100514T114848 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================

RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:48:50
ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf


RMAN> run {
2> set maxcorrupt for datafile 4 to 1;
3> backup database;
4> }

executing command: SET MAX CORRUPT

Starting backup at 14-MAY-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf
input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf
input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf
input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf
input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf
input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_nnndf_TAG20100514T114930_5yt75cb1_.bkp tag=TAG20100514T114930 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:35
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 14-MAY-10
channel ORA_DISK_1: finished piece 1 at 14-MAY-10
piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114930_5yt78fqt_.bkp tag=TAG20100514T114930 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 14-MAY-10
    Thank you

    Joaquin Gonzalez

    Select * from V$ DATABASE_BLOCK_CORRUPTION;

    only the brand as a corrupted block. This simply shows that the block was found to be corrupt.

    the marking is of DBMS_REPAIR. FIX_CORRUPT_BLOCKS

    See http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10577/d_repair.htm#CHDGBBEG

    Hemant K Collette
    http://hemantoracledba.blogspot.com

  • How to create a service mark in Dreamweaver?

    I need to create a service mark in Dreamweaver. I checked on the basis of knowledge and character cards I could find only to copyrights, TM and trade-mark.

    If it is not a keyboard shortcut, how do you create in Dreamweaver? I tried the tag < sup >, which is used for the aforementioned characters.

    Any suggestions? Advice? Tips? :^))

    I think that you might forget the closing tag. It should look like this: SM

  • 4K Canon EOS5D Mark iv and EOS1DX Mark II video

    Hello

    I can't play or correctly modify videos 4K of the EOS - 1DX Mark ii on my Mac. The images are wiped out as if it were 5 fps.

    I have OS X El Capitan 10.11.6 with 2.6 Ghz processor Intel Core i5, 16 GB of RAM, Intel Iris 1536 MB graphics card.

    I usually play and edit 4 K Panasonic video with no problems.

    Here, I tried the Canon 4 K MJPEG with Final Cut Pro X, Quicktime, VLC, video player Rocket and EOS Utility film without success.

    The EOS - 1DX Mark ii as well as the EOS - 5 d Mark iv btw are not on cameras for Final Cut Pro X.

    https://support.Apple.com/en-us/HT204203

    I also tried to play videos 4K 1DX - EOS Mark II on 5 different Mac and it has always failed. I tried on a Windows PC, and it worked.

    Apple support told me that Canon codec is missing to play videos 4 K 1DX - EOS Mark II.

    Can you confirm?

    What can I do without losing the quality 4K

    You can search this forum for the camera model, but I think that you will get a faster response by visiting the Canon support forums, if they exist. If there is no available for Quicktime codec, you go through a conversion software, upstream of FCPX. The camera came with a way to move the motionjpg files to a Macintosh? Should have.

    http://nofilmschool.com/2016/05/field-review-Canon-EOS-1d-x-Mark-II

    https://www.YouTube.com/watch?v=p67plTeMyD8

    http://newatlas.com/Canon-1DX-MarkII-DSLR-4k/41619/

    https://www.cinema5D.com/Canon-EOS-1d-x-Mark-II-review-real-world-video-samples-: first-impressions.

    http://www.newsshooter.com/2016/06/18/the-Canon-1DX-MKII-4k-video-DSLR-reviewed-par-Jon-Roemer /.

    The X II 1 d produces very nice video 4 K, but there's a catch: capture 4 K is limited to Motion JPEG. Motion JPEG is a relatively inefficient compression method, especially compared to the codecs of H.264 - based, such as Canon XF - STROKE (which is still on the compact Canon XC10). It requires broadband which produce large files. As you can see in the table below, 4 K/30 p of record runs nearly 500 Mbps and 4 K/60 p manages nearly 800 Mbps. By comparison, Sony a7S II captures 4 K/p 30 to 50-100 Mbps and the Panasonic GH4 is 100-200 Mbit/s.

    But what about the 4 K?

    The biggest upgrade in spec video camera is the addition of 4K film but, curiously, this can only be captured by using Motion JPEG format and the greater-than-16:9 DCI 4 K (4096 x 2160 pixel) aspect ratio. Two of these choices seem odd: all - I have H.264 compression, the camera uses to its 1080 images would be a more effective choice of codec and UHD 4K 16:9 flavor is better suited to certain applications.

    However, with the capture of 4 K, the 1 d X II includes tools to capture 8.8MP frameworks of its 4 K files: how the decision to save each image as an individual JPEG is a bit more logical. Wedding shooters could even use this feature for document receptions in complete silence: despite the 1 D X II wins a continuous silent drive like the 5 d/R mode, it isn't all that silent.

    The 1 d X II also won a headphone jack, which is important for the monitoring of noise levels during video recording.

  • I think I erased my OS and question mark flashing now appears

    Here is what happened. Haha I actually went to utilities OS X using the command (⌘) r. Then I clicked on the OS utilities and I removed my boot drive.        I restarted the flashing question mark appeared on my start, I tried to restart again and command prompt - R key and it directly me linked to Internet OS X recovery where appears the rotating Globe. What should I do next? I want to go back to work. Help, please. Thank you.

    Hello. Have a look here If flashing question mark appears when you start your Mac - Apple Support

  • Blue square with a question mark instead of a picture

    I'm on Messages to use with your Mac - Apple Support.

    Instead of pictures (or), I get a blue square with a question mark in it.

    This does not happen with all Web sites, but I wonder why it's happening with an Apple site, and how I can see the photos.

    It sounds like a broken image link.

    Post a screenshot if you can, so that we can confirm. The page seems OK after a glance. Command + shift + 4 then do slide on the affected area, add the image to the desktop to this site via the camera icon.

    If you have browser extensions, disable them and repeat the test. Also try a different web browser if possible to see if it is the scale of the system or only Safari. Is - this Safari you use?

  • Mac mini (late 2012) flashing - question mark folder recovery does not work

    Hi all

    earlier today, I upgraded my Mac mini (end 2012) to the latest version of macOS Sierra.

    After 1 hour of use, I realized that many of my plugins FCPX were not working.

    I contacted the developers, and they said does not update the plugins and they told me to go back to El Capitan.

    I decided to listen to them and try to downgrade my OS.

    I restarted the Mac and held down Cmd - R or something like that that took me to the disk utility screen.

    Then I went down to dinner, and when I returned 30 minutes later my Mac had entered the sleep mode for some reason any.

    I woke up the Mac and 40 seconds later the power went out for 5-10 minutes.

    After the blackout, I restarted my Mac that took me to a black screen with a flashing question mark folder.

    I followed some tutorials online (including how to enter get - and the recovery of internet mode), but after a while even restoration of the internet shows me the flashing question mark folder.

    I don't know what to do.

    And no - unfortunately I don't have a Time Machine backup.

    But I have a backup with all my most important files.

    Is it possible to force the Mac to reset itself or something like that?

    Help, please.

    Best regards

    Filip

    Mac mini (late 2012)

    I7

    16 GB OF RAM

    500 GB Samsung SSD of 840 - evo

    Graphics Intel HD 4000

    What happens exactly when you start Internet recovery

    by pressing Command + Option + R at the start of the OS X Internet Recovery*.

    and go to disk utility and repair the startup disk?

    If repairable, the startup disk to format and install OSX via recovery. you install Mountain Lion or dependent Mavericks when the Mac was made. Then OSX you want.

  • Mark email unread

    Does anyone know if there is a way to mark a single e-mail in view threaded as unread? Before iOS 10, I could see a complete electronic conversation in a single thread, but if I wanted to return to a specific e-mail later in the thread, I could score only that we as unread.  Now, I don't like to have the possibility to mark the entire conversation as unread.

    Literally the worst thing about the new update. It is of course outside the constant freezing and voicemail problems. Is there actually anyone doing QA before making these releases Apple?

  • Mark the messages as not junk?

    With the help of 10.11.6.

    I don't see any option to mark legitimate messages as NOT junk.

    What is the trick?

    Drag it to your Inbox.

  • After update Macbook, I had a folder with question mark on it

    I was forced to upgrade my macbook, and then I saw a folder with question mark in this regard.

    Start your Mac by holding down the button Option. Who should start the Boot Manager window where you can select the startup disk, and then click Restart.

    Startup Manager: how to select a boot volume

Maybe you are looking for

  • How to restore the Notes

    I recently started to use my writing notes and jotting down ideas, but last night I was not sure if my notes would be shared with my Mac friends since I have not got one for me and his had used for synchronization and sharing of music. I decided to d

  • Follow-up of applications for security delays

    When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the

  • Satellite A200 - screen turns off without reason

    I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythi

  • Skype on Ubuntu 4.2.0.11, bold italic

    I updated Skype using package manager and had the unpleasant surprise of windows GUI and chat shows with small bold italic. The program large fonts configuration remains unclear and still isn't a way to set a font, but I don't know that italic bold c

  • HP PSC 2350: Colors wrong print HP PSC 2350

    I have Windows XP and IE8. Lately, the printer has been printing with the color green instead of yellow. The rest of the colors are fine. I tried to align the printer and clean the cartridges, but it has not solved the problem completely. In the Tool