Corporate sync works do not "connection error".

Similar Questions

• I do not use sync and am not connected? Why my favorites are synchronization?

  My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?

  Maybe an add-on is the sync these for you.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Repository working is not connect you but can connect you to master repository

  Hello

  Recently, my password to the connection diagram (master repository) database has expired. I refreshed the password. When I tested the link with the master repository it is connected successfully, but when I tested connection with referential work he demonstrated an error of invalid connection sawing repository.

  
  

  Please help me in this problem.
  

  
  

  
  

  ERROR:

  
  

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

  	at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
  	at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
  	to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:581)
  	at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  	at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.testConnection(SnpsDialogLoginDetail.java:755)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.access$ 4 (SnpsDialogLoginDetail.java:743)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail$ 2.performAction(SnpsDialogLoginDetail.java:288)
  	at oracle.odi.ui.framework.event.OdiActionListener.actionPerformed(OdiActionListener.java:69)
  	at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  	in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2319)
  	at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  	at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  	at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
  	at java.awt.Component.processMouseEvent(Component.java:6288)
  	at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
  	at java.awt.Component.processEvent(Component.java:6053)
  	at java.awt.Container.processEvent(Container.java:2042)
  	at java.awt.Component.dispatchEventImpl(Component.java:4651)

  Do you use the same pattern to the work of master repositories &?

  If Yes, then you must change password in connection to the repository to work as well...

  Connect only to the master repository in ODI Studio.

  Go to the topology-> Repostiories-> repositories of work. Double-click repository work on you

  

  New window pop up on the right side. Click the card to change the password at reference work

  

• Difficulty 'Not connected' Error Messages When you try to access Web Services

  If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.

  Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.

  • The first thing I'd like to try in this situation is a reboot of the system.
  • First, unplug the power cord at the back of your router.
  • Then unplug the power either to the back of the printer or the wall without it first turn.
  • Wait about 30 seconds and reconnect the power cord to your router.
  • Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
  • Once everything is back running, try to access ePrint or your applications.

  If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  • After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
  • Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
  • Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
  • For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
  • For secondary school or another DNS server, you will want to write 8.8.4.4.
  • Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
  • Press the power button on your printer, wait that it completely power off and press it again to power it on.
  • After doing this, go ahead and try to activate ePrint again.

  These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.

• HP! 6906n: 1606n (which always worked) suddenly not connect to Mac

  I ran across all of suggestions in the section, pp HP for help and reset the whole system of printer but I stil get the message that the printer is not connected. Another computer cannot print.

  Help!

  and thank you!

  Hey @seankernan,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have some problems with your Mac OSX 10.11 machine printing on your Laserjet P1606dn printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once this is done, we will have to determine if the printer is in an error state. Make this document explains associated material of the printer errors, what they mean and how to solve them.

  If the document does not help you solve the question and the only light is a steady green light then the next step is to make sure that the printer can print a self-test page. To hold both down the button with the sheet of paper on the printer for about five seconds and the printer prints a page. If it is Yes, then the issue is related to the network. If it's not then the issue is still material related. I'll send you some guidance on how to perform a factory reset the printer bit time, however these directions should be carried out only if everything at this point. Do this reset restores all default settings of network on the printer. If you had anything on the printer, then you will need to set up the printer again.

  If after following the above, you are still not able to print a self-test page then the printer must be replaced. You can contact HP support by clicking here and filling out the form below.

  If after following the above, you are able to print a self-test page, then the next step would be to troubleshoot your network. To do:

  Turn the printer off.

  Disconnect the power cable from the back of the router for a minute.

  Once all the lights are back we will re - turn on the printer.

  Print the self-test again page.

  At this point, we will need determine what the printer think happens on the network. On the last self-test page, there will be a line indicating the IP address, IPv4 address or something similar. We will have to decide the issue based on the IP address.

  • If the IP address is 0.0.0.0 then the printer is having a problem with the connection to your network at all. Take a look at the network cable to the back of the printer. If you have a light in the back then the printer is having a problem with the network. Contact your internet provider or one that is provided with the router to determine why your printer will not connect to the network. If you have no light or the cable in the back is loose, then you have a hardware problem and the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.
  • If the IP address starts with 169.254, then the printer does not receive a valid IP address. Wait a few minutes and print the self-test again page. If you still receive an address 169.254, then you have a problem with the network. Contact your internet provider or one that is provided with the router to determine why your printer will not connect to the network.
  • If the IP address starts with 172 the printer connects to a network of comments. If you contact your internet provider or the one that you supplied with the router then they can help you with deactivation of the feedback network.
  • If the IP address begins with 192.168 or 10 the printer is properly connected to your network. The problem is at this point related to your Mac.
  • If the IP address begins with any other number then the printer connects to a network, but someone changed some network settings. At this point, you will need to contact one that keeps your network to determine why your printer cannot connect to your network.

  At this point if you are unable to print from your Mac, but are able to print the self-test page then please let me know and I'll be able to provide more guidance. Also let me know if this allows you to print.

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• Getting the generic host process error. Using XP SP3. Programs do not work, can not connect to the net, etc.

  If this can help:

  Application name: SVCHost.exe AppVer: 5.1.2600.5512 Offset: 001a6f64

  Hello

  ·          You receive error message generic host when you work with a program or a particular application?

  ·          Do you remember any changes made on the computer before the show?

  ·          What is the service pack installed?

  ·          What is the number and the model of the computer?

  ·          You have all the products HP installed or connected to the computer?

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  You can check the links below: error messages when you start a Windows XP-based computer and then try to download Windows updates: http://support.microsoft.com/kb/931852

  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

• Netflix search works is not in error of Windows Media Center (windows 8 pro) "error message"No internet connection"

  Separated from this thread.

  The installation is successful, in my case; However, when I try to use the function search I get an error message 'No internet connection' and close the search window.

  As this solution is supposed to be a local, I am at a loss as to what is happening. Streaming movies works btw, so I don't have an Internet connection available and functional.

  Any help would be appreciated, thanks!

  Edit: I have Media Center running on Windows 8 Pro.

  Hi Florian.

  I appreciate if you could help us with more information.

  1. You can use search Netflix when you connect using a web browser?

  2. Is the Windows Media Center works correctly and can access the Internet other than with Netflix?

  If the problem is with Netflix Media Center User Interface, it is supported by Netflix.
  Go to http://www.netflix.com/help and post your question.

  It will be useful.

• New Sync works do not (/ questions/1007210)

  HI - Sync keeps telling me that he was unable to synchronize for 14 days. I tried a manual "Synchronize now" nothing helps. I tried a "Reset Firefox", but this seems to clear things I was working on (saved sessions), then restored using MzBackup.

  Here is the synchronization log, it seems the same as before. I deleted some disabled extensions, no change. What is the cause and how can I solve this problem? I prefer not to do a Reset, but I have the old profile and you can probably dig (?) on the stuff I need if there is no other choice.

  1434904335309 journal of Flushing Sync.ErrorHandler DEBUG file.
  1434904335311 Sync.BrowserIDManager ERROR extracting background for key package failed: No. keyFetchToken
  1434904335311 Sync.BrowserIDManager ERROR could not authenticate: No. keyFetchToken
  1434904335313 Sync.SyncScheduler DEBUG compensation triggers synchronization and the overall score.
  Sync.SyncScheduler 1434904335313 DEBUG sync 3600000 SP.

  Try to delete the signedInUser.json file in the Firefox profile folder and delete the folder of weaving (Sync was formerly known as armor).
  If that is not enough then delete the prefs.js file to reset the prefs and may also remove the compatibility.ini file to reset the profile.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Weather gadget not working - could not connect to the service

  original title: weather gadget does not!

  I have Windows 7 Ultimate 64 - bit and my weather gadget does not work, it displays a message "unable to connect to the service.

  I also tried turning off the firewall and antivirus , but it still doesn't work for me.

  Update:
  Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.
  Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you.

• Import works do not get error message

  I have just updated my Lightroom CC to the latest version and now impossible to get import to work at all. I get the error message "namespace was not found: AgImportScanningService".

  Operating system is Apple Yosemite. Everything I have rebooted several times, but does not help.

  It's the system of Lightroom info:

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Mac OS 10

  Version: 10.10 [5]

  Everything worked great until I did the update.

  Hoping someone can help

  Yes,

  • First uninstall the current version
  • Restart the computer
  • Reinstall LR CC 2015

  ~ Rohit

• iCloud sync works do not all of a sudden

  I have iMac, iPhone, iPad 9.7 Pro and iPad Air-1 - 6s all set up to sync, and everything was fine until a few weeks ago.

  Safari & photo stream always sync ok, but the Contacts, calendars, reminders are synchronized with all devices.

  The latest appears in iCloud.com - what is good.  Also appears in applications of iMac - it's good.  But do not show up in the iPhone or the iPad unless news comes from the device.  New iMac also will not sync to devices.

  (Using the new iMac with OS 10.9.5 and all devices with iOS 9.3.1 - was ok in this way until recent times)

  Any ideas?

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• WebClient does not work could not connect to one or more systems of vCenter Server

  Hi all

  I just installed vCenter 5.5 and seems to have done very well.  I can log on to the client vSphere on my computer and see my vcenter server.

  When I log in the webclient service, I can't see my vcenter server.  There's nothing there.

  Also, I get the following error message at the top of the page of webclient when I connect:

  Cannot connect to one or more systems of vCenter server:

  https://domain:443 / sdk

  Question and reinstalled vCenter server has been fixed.

• Device does not connect error 507

  Hi all

  My phone is bb 9300 curve, iam using bb os 6. decommissioning for os 5, I installed JL_Cmderand wipe all data.

  Now iam getting software "error 507' Reload.  My bb desktop software version is 6.0, how can I install bb os 5, please help me itz very urgent...

  Thanks in advance

  Hi all

  I solved my problem. Thank you peter for your advice.

• I have a problem with 'url not valid and cannot be loaded' also the site accuweather on my toolbar does not load, all I get is a sying note "connection error". The google homepage, I've always used is empty at the start of firefox.

  I had a problem where firefox crashed while the closing bbc iplayer site last night, I reebooted firefox and everything seemed in order until this morning. I cannot use the default Web page of google but you can use the uk version. When you try to solve the problem I get the "invalid message url."

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox