Correct video drivers Inspiron 7520 SE 21/11/2013?

Similar Questions

• Problem with the video card Inspiron 7520

  Hi all

  
  Since I installed the 8.1 update windows I have problems with the video card. PC 2 video cards are installed:

  (1) AMD Radeon HD M 7730
  (2) Intel(r) HD Graphics 4000

  The main problem is that the resolution of the screen is fuzzy. I downloaded from Dell, the updates for both cards and tried to install, but it does not change Sub. My question is: is there a special procedure to install a driver?

  Thanks to you all!

  HELPPPPPPP!

• Cannot find or download video drivers for Inspiron 531

  Hi guys

  System:

  • Inspiron 531
  • AMD Athlon Dual Core 6000 + 3.01 GHz
  • Windows Vista 32-bit SP2
  • NVIDIA GeForce 6150SE nForce 430

  Earlier, the display on two monitors connected to my Inspiron (Dell 24 "& Dell 22") deleted and enter Power Saving mode.

  Both screens are also connected to my XPS 8300 and they work very well with this system. I also checked the two cables and they work too.

  The monitors are usually connected to my Inspiron like this:

  • The 24 "monitor is connected to my Inspiron with a DVI - D to DVI - D cable
  • The 22 "monitor is connected through a DVI - D to VGA cable (the slot of DVI - D on the PC to the monitor VGA slot)

  However, if I run live of the Inspiron, its connected monitor VGA slot to works fine.

  The display shows a screen of information who advised me to click OK to complete the installation of the "new" NVIDIA software I have automatic updates turned off and I certainly did not begin any procedure update.

  Anyway, I clicked 'OK' and reconnected the monitors as normal to think everything would be ok, but they still do not work.

  I had a problem not long after I got this PC when I updated the video drivers from NVIDIA direct - I could run basically only to screen at resolution 800 x 600. I contacted the Support technique Dell and they said, it would be best to always get the updates driver directly from Dell. I did this and the problem was solved.

  I tried to find the relevant video drivers on the Dell site, but for some reason any my Inspiron no longer appears on my record details, only my most recent XPS. I tried to re - register, but I keep saying that my Service tag is no longer supported. I found anywhere else on this site where I can download the appropriate drivers.

  So I'm stuck - ideally I want to download the drivers for my dual monitor Setup works as it was before. I tried to do a system restore, but I don't know if it will work. In fact, I cling to the wide trying anything in case I find myself accidentally disabling VGA, power supply, so I won't be able to do anything with my system.

  Why Dell make life so difficult for someone who has purchased a product from them once his warrany has expired?

  Thanks for any help.

  What happens if you start in Mode safe?  -Restart, and then press F8 before Windows starts to load and choose Safe Mode from the menu.

  Assume correctly that it is an add-in PCI-e graphics card? A map is not... ??

  You can try this:

  1. Power off, unplug
  2. Press / hold the power button for about 15 sec.
  3. Carefully reinstall the video card in its niche.
  4. Then remove the battery from motherboard and the power button press / hold again to ~ 30 sec
  5. Reinstall the battery (right-side-to the top) and see if it works now

  NOTE: It may be a good idea to open BIOS setup (reboot and press F2) before trying the above. Copy down all the settings of the BIOS because the battery will reset the BIOS default settings. After reinstalling the battery, restart and press F2 and confirm that the settings match what you noted. Be sure to save changes before exiting the Setup program.

• Dell Inspiron 7520 fuzzy applications after windows 8.1 upgrade

  Hello

  I have recently installed windows 8.1 on my Dell Inspiron 7520.

  After the upgrade, the switchable GPU do not work, and many applications have a different (and fuzzy) resolution compared to the rest of the screen. All Dell video drivers (even drivers for windows 8.1) do not resolve the problem.

  I solved the switchable GPU problem, install the latest drivers video, taken directly from sites Web Intel and AMD:

  -for the Intel HD 4000: pilot 10.18.10.3277, 8 - 19.2013

  -for the AMD Radeon 7730: pilot 14.501.1003.0, 20/11/2014.

  This is the only combination of drivers that works (I tried many...) but the fuzzy applications issue is still unresolved. Look at the picture in the link below (the resolution of the screen is correct, while the words in the window are blurred).

  

  Does anyone have a solution? Thank you.

  See

  TechNet.Microsoft.com/.../dn528847.aspx

  and try the suggestion in paragraph "use Windows 8 DPI scaling (is usually not recommended)" to change the direction of the CIO from the "improved" "Windows 8.1" way, to the "Windows 8" way. " I had to do this on my E5540.

  Basically, you need to manually specify a % (ie: 125%, as you did in win8) rather than use the novelty of the rule of the "Windows 8.1.

• Can't see stereo mix on Dell Inspiron 7520

  Hello

  I know it is a problem that lasts for years and I googled and read a lot of forum posts on this topic but I still can't understand.

  I have a new Dell Inspiron 7520 and I want to use the stereo mix function, so I can record audio coming out of my Conexant SmartAudio HD card.

  I tried to open the driver and .inf file commenting on these three lines:

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  I then go back into Device Manager and re - install the driver Conexant by accessing the location of the .inf file that I just edited (by removing the comments of semi-colons). But I get the error message: "Windows found driver software for your device but encountered an error while attempting to install it - Conexant HD Audio - the system cannot find the file specified. '. Just before I noticed it says that the driver is not signed, which could be a problem as I have Win 7 Home Premium 64 bit.

  Any advice greatly appreciated.

  I got it to work!

  The solution involves the file the modified driver .inf and re - install this file. Here, I explain what I did in case anyone else has this same problem. This should work for any Windows 7 64 bit computer with the Conexant HD sound card and driver Conexant HD even though I only tested it on my own computer.

  My problem:

  New Dell Inspiron 7520, Win 7 Home Premium 64 bit, Conexant SmartAudio HD sound card with the last driver Conexant Web Dell Drivers site. Stereo mix would not appear in Control Panel > Sound > recording even tab after a right-click empty space and selecting display disabled and show disconnected devices.

  Solution:

  Make sure that you install the Conexant HD SmartAudio driver. You should see it under the sound, video and game controllers in Device Manager. With the Conexant driver already installed and the key work is to find the exact location of the driver file. It can vary from one computer to another and also be called something else. Mine is called chdrt.inf and it was located in: C:\Windows\System32\DriverStore\FileRepository\chdrt.inf_amd64_neutral_fa34defac299c440

  If you don't know where your .inf file, you could do a search for windows for text in files of the string: EpSettings\StereoMixEnable. It will most likely be a file with a .inf extension and located in a subfolder of the System32 folder.

  Right-click on the name of the .inf file and select 'Open with' then choose Notepad. Press Ctrl + F and search for StereoMix to find three lines:

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  Delete the semicolon-->; and save the file. However, Windows doesn't allow you to save the .inf file unless you change the permissions of files. It becomes complicated and a little dangerous!

  Basically a right-click on the .inf, then click these buttons/tabs... Properties > Security > advanced > owner. The current owner should be TrustedInstaller. Change this account on your computer that has administrator rights, and you can connect as long as. To do this, click on change and in the "change in ownership to:" field there an entry should be there as: Administrators (name\Administrators of your computer) to select that then Ok and apply and Ok to close the dialog boxes.

  Now right-click on the .inf again file: properties > Security > Edit > select "Everyone" in the "Group or user names" > check the corresponding box to 'Write' in the 'Permissions for everyone' section > press Apply and OK your way to close all the dialog boxes. Now you can save the .inf file, you remove the semicolons of!

  This step is VERY important. You must change the return of the permissions to the way they were. Right-click on the .inf right and as before changing the write permission by deselecting the checkbox for 'Writing', and then change the property of the .inf file back to TrustedInstaller. This time you'll owner > Edit > other users or groups and type NT service TrustedInstaller in the box and press on check the names, then Ok and apply your way out dialog boxes.

  Now finally, re - install the driver: here I had problems with the driver not being recognized and maybe it's because Windows 7 64 bit has said it is not digitally signed so here's what I did: Start Menu > right click on command prompt > run as administrator > type this command and press on... Enter bcdedit/set nointegritychecks WE.

  To install the driver: Device Manager > sound, video and game controllers > right click on HD SmartAudio Conexant > update driver software > Browse my computer for driver software > let me pick from a list... > Have Disk > Browse > now, here, you have to find the location of the .inf file that you just edited, in my case, I stuck in the path to the folder and press on enter then select the chrdt.inf file and click OK. When it was installed I went back to the command-line as before and run the command: bcdedit/set nointegritychecks OFF

  Now, I rebooted the computer and this time stereo Mix appear in Control Panel > sound > recording after right click tab empty space and selecting display disabled and show disconnected devices.

  Sources of info:

  "How to get stereo mix on SOLUTION Conexant sound card"

  forums.Toshiba.com/.../174656

  'How-to Configure System32'

  www.eHow.com/how_7625078_configure-system32.html

  "How to restore TrustedInstaller as owner of a file in Vista and Windows 7"

  www.Vistax64.com/.../159360-TrustedInstaller-Restore-owner.html

  "Windows 7 - turn off driver signing verification.

  en.kioskea.NET/.../3914-Windows-7-disable-signature-verification-of-drivers

• Inspiron 7520 AMD 7730 m poor performance

  I recently bought a dell Inspiron 7520 computer and it came with the graphics card AMD 7730 switchable m.

  It seems that the intel HD 4000 gets more fps in games such as cs and dota 2. The way I've tested this using AMD and CCC system monitor, configure switchable graphics. I will load Counter strike with option set to 'save energy' who will use the intel 4000. I get about 70 fps in the main screen and about 40 in game. When positioned on 'high performance', using the amd 7730, I'll get 30-40 fps and 30 in game. I know that move to high-performance use the amd card because AMD system monitor program will not record the use of the amd card, not the intel 4000 and is active during the switch 'high performance '.

  I use the new drivers of 13.1 leshcat because dell drivers for this card are outdated. I have installed correctly and do not know why I get these weak performance of this card. The main reason to buy this laptop is for graphics... any help? computer back? Thank you

  @eggbertn you realize that AMD drivers are constantly being twisted for games improve performance. Maybe they have not circumvented in Dota 2 or CS again.

  Take for example their Notes in the last Beta 12.11 where there was a ton of games listed in regards to performance increases.

  Or their release notes for their just released Beta 13.2 latest here with games more to get a performance gain.

  I know leshcat labs did a good job, probably the only saving grace that have users of AMD, but AMD looks like it finally gets it's collective you know what set maybe try their 13.2 beta driver see if it helps.

  Another suggestion run landmark and compare them to others who use the 7730 m see how you fare.
  Sometimes, it's the game, sometimes it's the driver.

  See you soon

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• uninstall the old video drivers

  HP Pavilion P6240F with Windows 7 64 bit. I want to upgrade the video card to a HIS Radeon HD7750. The instructions on this web site

  say to go into the bios and disable the onboard and select the correct bios setting in the bios, go to page Advanced Setup, select the graphics card, and pcie-16. so stop and install the card. With the card installation instructions say to uninstall old video drivers first. Is it necessary to uninstall the onboard video drivers?

  Hello

  Here's the procedue of deleting driver Intel UMA.

  1. click on "Start" on the Windows 7 Desktop, then typing "Device Manager" in the search field that appears and press 'Enter '. The Device Manager window is in view, showing a number of categories of equipment.

  2. open the "Cards" section, and then double-click the Intel Graphics Media Accelerator. A video display properties window opens.

  3. click the "Driver" tab in the properties of video display window and press the "uninstall the driver. A Windows product to uninstall the driver for the video card Intel Graphics Media Accelerator. Close Device Manager to resume normal use of the computer, and then restart the system.

  4. Once you complete the following steps, please make sure that you change the display priority in BIOS Setup menu before entering the OS.

  5. save the BIOS setting and restart the system for OS and then install driver AMD graphic.

• someone at - it audio and video drivers for a HP m7170n?

  someone at - it audio and video drivers for a HP m7170n? We had to climb a new hard drive and there was no disk backup with the driver information.

  Thank you!

  Yes, I understand your point.

  I'll assume you have XP Media Center Edition, which was the operating system that is provided with your PC.

  The specifications of your system also specify that your PC comes with the video card ATI Radeon X300SE, correct?

  Below should be XP video drivers you need for this card:

  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/radeonaiw_mce.aspx?type=2.4.1&product=2.4.1.3.13&lang=English

  You can download the complete driver of features and software catalyst control center (the first download listed, or simply the WDM (Windows Driver Model) driver (without the catalyst control center software).

  Paul

• How to do a clean install of Windows 7 on Dell Inspiron 7520 (aka Inspiron 15R Special Edition)

  The operating system that are preloaded on my Dell Inspiron 7520 (a.ka. Inspiron 15R Special Edition) is Microsoft Windows 7 Home Premium. I have a retail version of Microsoft Windows 7 Ultimate and want to do a clean install on my laptop.

  My laptop was able to boot from the retail disk.

  After clicking on 'Install now' and accepted the terms and conditions of Microsoft Windows 7 Ultimate, I checked the configuration box "Custom (advanced option" in which a new copy of Windows would be installed. The next screen that displayed contained the following bizzare message: no hard drive found. "Click on load a driver to provide a driver for installing mass storage.

  Could someone tell me where and how to find the mass storage driver?

  I am also having exactly the same problem:

  After getting BSOD (indicating iaStor.sys) every 20 minutes or so I decided to format the laptop and install my copy of opportunity of Win7 Pro SP1. I jumped in the Win7 DVD and I saw that the couldn t of windows setup find any HARD drive to install to.

  I downloaded the drivers from Intel (f6flpy - x 64) and them burned on a CD. It took me a few tries (I kept getting error messages), but the computer finally accepted Intel Mobile Express Chipset SATA RAID Controller drivers.

  Finally, I could see the readers. So I deleted the partition of 1 TB, created two new partitions (~ 100 GB and GB 890) and clicked on 'format' on two of them.

  But when I tried to select ONE of them as the destination for Windows drive, I received the following message:

  "Windows cannot be installed to Disk 0 Partition 3. Details: Windows cannot install to the selected location. "Error 0 x 80300001.

  So now when I turn on my laptop (since there is no operating system or anything), I get a black screen with the following message:

  Windows Boot Manager «»

  Windows could not start; A recent hardware or software change might be the cause. To solve the problem:

  blablabla (nothing really useful)

  Status: 0xc0000034

  Info: an unexpected error occurred. »

  Before I read this thread I also tried to change the SATA settings to AHCI and ATA, but both STILL produce ANOTHER problem: installing Windows recognises the hard drives, but it never rose from 0% of the phase of "expanding files" installation.

  Please, can anyone help?

• Spectrum of HP 13-3004tu Ultrabook: video playback choppy after you install the latest video drivers

  I upgraded my video drivers (Intel high definition (HD) Graphics Driver 10.18.15.4248 place) for my Ultrabook 13-3004tu of the spectrum and after reading so online video (YouTube, videos on the sites of integrated information ect) play jerky and the sound is distorted. He was going well until I downloaded the new driver.

  Hello @kiwifruit28,

  Welcome to the HP Forums!

  I have read your message and understand that after updating the graphics driver, your spectrum HP 13 - 3004tu Ultrabook there are problems with the video playback. Here is a document to help solve this problem. Here is a link to HP hardware Diagnostics where you can test your hardware for portable computers. Alternatively, you can do a System Restore to a point before the end of the update of the graphics driver.

  Thank you.

  If this post helped you, feel free to click on the thumbs up!

• Video drivers for HP Pavilion 6700 Geforce 8400 gs

  I recently spent from Vista to XP on my laptop and now I have most of the drivers reloaded, I still can not find the drivers for my nVidia Gefore 8400 GS video card or my audio drivers.  I tried all the places I can think of as well as many hours trying all the drivers that are recommended for this problem.  Please help me.

  Well, after many hours of work on this computer, I think I've found which can cause a lot of problems crossing your operating system from Vista to XP and try to find your video and sound drivers.  Thus, in order to allow your drivers install on a computer that is come from the factory with Vista installed on it, you must download the program flash bios HP offering their topic Download Driver for XP for the laptop there.  After you properly flashed your bios without burning your northbridge in the meantime, you can install your video drivers.  But, still does not allow video drivers, at least for my computer which is a Pavilion 6700 on the nvidia site.  I found the applicable driver download for my computer to RadarSync. com, which is a nVidia 8400 m GS.  In addition, the same problem happened with my audio driver for my audio controller realtek alc268 HD, and I had to download this driver from a different 3rd party source who was techpowerup. com  I hope this helps those of you who may be trying to downgrade from vista to xp.  Be careful and good luck.

• Windows 7 video drivers for HDX 9000

  I have a HDX 9000 T CTO notebook and have noticed that the video drivers in the driver download section have not been updated since January 2008.

  Y at - he's going to be an update for windows 7 or do we still use the old version?

  Check if youre running the power save mode (or balanced) in windows power settings. It is possible that the power of OS saving mode goes your gpu to x 1. Also check if you have the latest version of the bios and check the bios settings.

  better would be to launch cpu - z (http://www.cpuid.com/download/cpuz/cpuz_152.zip just run the .exe) once all just inside windows and then all within a game (just alt - tab or alt + ESC or press the windows button to access the desktop computer). even if a game is running, it should get up to 16 x.

• Video drivers Tecra M3, causing accidents

  My Toshiba Tecra M3 crashes (freezing screen or blue of death) with 71.14, 71.36 and 76,44 drivers. It uses a NVIDIA GeForce Go 6600 TE 128 M. When I uninstall all video drivers (or boot in safe mode), the laptop works very well, although of course the scrolling is deadly slow and I can't suspend or put into hibernation. But when I install one of both WHQL certified drivers from the site of Toshiba, 71.44 or 71,36, I can always create a crash just by running a screensaver 3D for more than 3 minutes. The same thing happens with the pilot 76.44 non WHQL laptopvideo2go.com.

  Sorry if this isn't the best thread to post on, but desperately, I'd appreciate any help you can offer on which driver can operate reliably. At this point, I'm not at all interested in exceptional graphics performance; I just want a portable stable to do some work on. Is there maybe some parameter of the driver to turn off some features fancies are the cause of the crash?

  The laptop has a 2.13 GHz Pentium M and 2 GB of RAM. He is running WinXP SP2 with all updates and used BIOS 1.20, later. And I doubt that it is a related, but here's another problem that I encountered with the VPN, Wi - Fi, and Matlab.

  Thanks in advance for any help you can provide.

  [Edited by: admin]

  Hi danhkon

  I guess that your laptop has worked properly at the beginning. Can you perhaps remember since when the aircraft began to make these disorders? It is not easy to give you proper notice or a any solution because each problem is caused by a reason any.

  First of all, I would like to say that you must simply use display driver given by Toshiba and not a driver that you found on the net. The drivers that you got on CD tools & utilities or drivers that you can find on the site Toshiba are all tested and they should work fine. AFAIK Tecra M3 is a new model and also delivered with SP2. This means that all the drivers are also tested to work properly with SP2.

  Before you spend a lot of time looking for the right solution, in my opinion, save your data and reinstall the OS using the recovery CD. On this way, you will have a stable cell to do work on it. If there is no second partition, that you can do to record data using the installation in expert mode.

• Pavilion a6455: display and video drivers

  Frequent crashes with Firefox and some other programs.

  Seen troubleshooting what graphics driver of lists as a cause of poss.  What is the good driver/s for my desktop using LCD monitor mod TFT20w90PSA +?

  Before the birth of nvidia geoforce problem seemed to settle?  But then a few weeks later message appeared to perform the service of network corporation nv apldll not designed to run on windows. In light of issues deleted geoforce who shortly after the problems started.  Do not use the computer for gaming, but use for some office work and internet growth, e-mail.

  jimh48

  Here is the link to the drivers for your PC HP product page: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-a6000-Desktop-PC-series/3677047/model/3719365

  Video drivers you want are original driver at the bottom of this list.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.