correction of linear data

Similar Questions

• Satellite Z30-B-100 - Correction of the date of purchase after registration

  I signed up for laptop Toshiba Satellite Z30-B-100, purchased from Romania, but I entered wrong purhase date (05.05.2015 instead of a correct 05.06.2015).

  How to correct the date of purchase?

  I have already sent to [email protected] and [email protected], but I have not received any response.

  Also representative of service Toshiba in Romania (restart the Service) were unable to resolve this situation.

  Check warranty info on support.toshiba.com/warranty shows wrong purchase date.

  Thank you!

  Hi cocopa.

  Please check your PM (private message)

  Greetings

• Get correct time and Date data in DIAdem data 11 PDM LabView

  I have a handful of files large tdms (9 million data points) collected with LabView that I need to extract elements from and export to a text file, with time string data.

  I use DataFileLoadSelect and the option to register, and then DataBlCopy in bring in a segment of data at a time, but I'm having convert explicitly each time value of a time base of LabView (01/01/1904) to the time base DIAdem (01/01/00), not to mention the offset, before writing the date-time as a text string - it really slows down the process.

  I ' t hit me that DIAdem (11.1) has got to have a way to correctly read the timestamps of LabView, but I'm a newbie to tiara, so any suggestions would be helpful. And no, I don't have LabView LabView installed locally, using a vi is not an option for me.

  Thank you

  Eric

  Hi Eric,.

  I saw your second post after I have posted my first answer.  Your second post has indicated that the main issue was the value of date/time of departure in tiara.  All versions of DIAdem, waveforms of support (10.0 - 11.1 currently) by default to hide the start time of each waveform absolute in an invisible property.  It is responsible, but you'd never know it by scanning the table of properties in the data portal.  Idea of R & D with this implementation is that most people will want to look at the relative time of the wave, and they were still hiding this "wf_start_time" property so that users would be confused by the inconsistency between what is displayed in graphic form and what they see in the properties of the data portal.  They have certainly achieved their goal, but only for customers, they had in mind.  It only that exacerbates an already frustrating problem for your use case.

  But there is a way to read this date/time property invisible absolute beginning and create a channel of date / time that you need for ASCII-output - I join you two examples below.  If you need to be more focused on the shifting geography, so I recommend the ChnLinScale() function instead of the calculator - channel, it should be even faster.

  Hope this helps,

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• Correction of my date of birth - tried several times and he keeps asking rest me my security questions (no ANSWER them but reset them). Shut up always back on reboot issues. There is no 'save' button once you make the correction.

  In the account settings my date of birth is incorrect (year) - I tried several times to fix it, but it keeps forcing me to reset my security instead of just answering q. No 'Save' button then tried just 'enter' or 'done'... once more, I get looped back to reset my Q & a I'll be ten years younger, if that's what Apple wants, but it should be fixable.

  Contact Apple:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• labVIEW does not correctly read the data

  I'm new to LabVIEW (use it for a subject in College), but I coded a short program which counts the fronts and edges of a signal (to be used with the addition of a quadrature encoder).

  I tested it at low frequency using the block to simulate Signal and it works fine, but as soon as I have the pump up to anything above 4 Hz, it starts to play up (including a positive benefit as a negative benefit). 10 Hz, it is not the edges at all. Same thing with the encoder - when turning very slowly the counties to register very well, but even a moderate speed and it will start missing.

  Don't know what the issue is. The code is pretty simple, so I don't know how this would have caused the problem. Here's a copy of my counter block (the entrance of true/false indicates whether to count the upwards or downwards).

  Are adjust you the length of your signals simulated when you vary the frequency?

  Your Subvi seems to be just looking for a transition in a waveform.

  Your simulated signal Express VI is set up for the sampling frequency of 1000 Hz and 100 samples.  If the outer loop iterates at 10 Hz.  If your frequency of 5 Hz, then you will have 1 transition in the waveform section and you will be able to detect it.  You go higher in frequency, then you could have multiple transitions in your waveform, but the Subvi seeks only to the first, and he might not even have this one.  Remember when I said that you need to run your loop two times faster than the incoming wave?  Well now you see that the ratio of 2:1.

  Adjust you the length of your simulated signals that you set the frequency so that you don't get multiple transitions on the waveform that you generate each iteration of the loop.

• date fill in the dimension with the correct values

  Hi all
  
  I have a 'simple' problem, but can't get it resolved! The calculations of the CDA in the cube not 'reset' at the right moment in time (they should 'reset' on the exercise, but it actually seems to happen on the normal calendar year).
  
  Our dimensions and cubes are MOLAP. There is a relational table that contains columns with values for both a calendar hierarchy as well as a hierarchy of exercise. This table tells the date dimension (only the tax hierarchy as MOLAP, we have just a fiscal hierarchy). The result seems correct in the data viewer.
  
  The cube is filled with both relational sources. A perspective provides the measurement values and CODE (distinctive signs of business) values for each dimension involved. In the case of the date dimension, it provides the code for the involved level value in which we cube (months).
  
  I made a very simple testcase with only 1 dimension (date) and 1 small cube. The cube uses only the dimesion of date (to load the cube on the fiscal hierarchy at the month level) and has 1 base measure that is loaded with a simple number and 1 calculated measure that calculates the value of the CDA for this basic measure. The calculated measure is added to the cube designer OWB by using the button 'generate calculated measures' and choosing the function 'Year to Date'.
  
  When complete the cube and using the data viewer to verify the results, CDA values don't 'reset' at the end of the year. They seem to reset at the end of the normal calendar year!
  After some tests, I have concluded that this has to do with the values I provide to fill the date dimension, but I can't figure out what should be the change, and I can't find examples anywhere.
  
  Someone out there a calculation for a YEAR of work in MOLAP?
  
  Any help much appreciated.
  Kind regards
  Ed
  

  Hi Ed

  It can be an inherent behavior of the time dimension in the AWs where the CDA on financial is not supported out of the box, see the OLAP thread below. Have you tried just build your simple case in AWM recreate? If you can get around using a custom expression, you should be able to define this custom OWB and still keep the design you have.

  Calculated against calendar CDA CDA tax measure

  See you soon
  David

• Calendar in dock not updated to the date of the day after El Capitan updated to v10.11.5

  El Capitan, updated in version 10.11.5 May 25, 2016, now the calendar in the dock is not updated to the current date, everyone had it?, how he was healed?

  See you soon

  Bill Edge

  What happens when you inspect system preferences > Date & time?

  • The correct time and Date displayed here?
  • Your time zone is correctly indicated?

• New P7 - 1380t. Day isn't staying correct

  Series of HP Pavilion p7 - 1380t

  Windows 7 Pro 64-bit

  No error. just the wrong date.

  Has a lot of changes - no. FOR MY PROBLEM

  The time is correct?

  Date and time system are supposed to be stored in the NRAM. The clock is provided small (probably a CR2032) battery power on the motherboard. Because you said it was new, I suggest that call you HP.

  800-HP invent or 800-474-6836 (24/7).

• The collection of accurate data of visa format read

  Hello

  I'm new in labview. I do a labview software to control and collect data for the ASL F900 Thermo Bridge. But I don't know how to get the correct visa read data format.

  Example:

  The Correct data format is: +0.123456789E\r\n (15 bytes)

  but sometimes the format of the data that I get is 56789E\r\n+0.1234 or .123456789E\r\n0

  I have attached the F900 user guide!

  Hi, VMI,.

  but sometimes the format of the data that I get is 56789E\r\n+0.1234 or .123456789E\r\n0

  During the initialization of the serial port you should leave and enbale the TermChar is the default setting for '0x0A' = LF = "\n". Then just read something like 99 bytes / VISARead: you will receive complete messages (after the first message).

• How can I recover data from a disk that does not open?

  It is connected to a USB port, it is turned on, indicated on the workstation dialog box and the wizard says that it works correctly, but no data can be retrieved. It is a 500 GB NOONTEC external drive.

  Hi Joe Barna,

  If please see this thread and follow the troubleshooting steps listed by Syed N.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-says-my-external-hard-drive-is-empty-but/b756d646-936a-E011-8dfc-68b599b31bf5?msgId=68f65ecd-096b-E011-8dfc-68b599b31bf5

  As long as these files are not damaged or infected by a virus or malware, there was no damage on the new computer. I think that the files could just be hidden or something like that. Just reply with the results of the steps listed above.

  I hope this helps.

• EPG does not download properly don't get "no data available" on different channels?

  Original title: EPG DOWNLOADED DO not CORRECTLY GET "NO DATA AVAILABLE" on DIFFERENT CHANNELS?

  I am in the United Kingdom and using MEDIA CENTER on windows vista x 64 and I find that I have big problems getting data from TV stations. There are downloading, then others like bbc and itv that simply say "NO DATA".

  I tried to download the data multiple times and still the same result...

  ID: 5

  VERSION: 2869752824

  TNT - CRYSTAL PALACE

  ID:120020

  TV SIGNAL: DVB - T

  SCHEMA VERSION: 5

  LANGUAGE: ENGLISH

  START DATE 01/01/01 12:00:00 AM

  DATE OF 08/06/2014 END, 19:00

  Show only THE FOLLOWING STRINGS: "No. DATA AVAILABLE.

  BBC ONE

  ITV

  CHANNEL 5

  LIVE LONDON

  DRAMA

  MOVIE MIX

  ITV + 1

  QVC BEAUTY

  CREATE AND CRAFT

  ROCKS AND CO

  FOOD NETWORK

  TRAVEL CHANNEL

  GEMS TV

  CHANNEL 5 + 1

  FILM 4 + 1

  CHALLENGE

  MOVIES4MEN

  JEWELRY CHAIN

  CHANNEL 5 + 24

  QUEST + 1

  TRUE ENTERTAINMENT

  CBS REALITY

  SEE THE MAP

  POP

  BBC R1X AND OTHER VARIOUS RADIO STATIONS...

  ANY HELP WOULD BE GREAT ROGER...

  You should contact your local tv cable company reagarding this problem.

• File modification date/time problem

  Hello

  I'm trying to use file of a file modification date/time to fix a system of synchronization between a blackberry and a PC. However, the date/time of the file is not updated as I expected.

  The following occurs:

  -Using a program, a file is modifidied to make more than 100 bytes.

  -> When checking for windows Explorer (using the mass storage mode to access the file) the change date is updated

  -Using the same program, the file is changed to be the shorter of 50 bytes.

  -> When checking for windows Explorer, the change date is NOT updated

  -Using the same program, the file is modified to be more than 20 bytes.

  -> When checking for windows Explorer, the change date is NOT updated

  -Using the same program, the file is modified to be more than 100 bytes. It is now longer that he has never been.

  -> When checking for windows Explorer, the change date is updated

  The code that updates the file is basically something like this:

  FileConnection connection = (FileConnection) Connector.open (fileName, Connector.READ_WRITE);        {if (!) {(Connection.Exists ())}
  Connection.Create ();
  }
  OutputStream out = connection.openOutputStream ();
  Output PrintStream is new PrintStream (out);.
  output.println ("a lot of text ');

  Various printlns... followed

  output. Close();
  out. Close();
  Connection.Close;

  I use a v4.5.0.55 8310 platform, 2.7.0.68.

  BlackBerry JDE 4.5.0.7

  Any ideas what's wrong?

  Kind regards

  Anders

  Yes, delete the file is kind of a workaround. Last updated date/time will be correct. Created date/time will be of course lost, however, since the time created is generally much less important that her last updated date/time is better.

  I ended up doing the following whenever I change a file of Java code:

  FileConnection connection = (FileConnection) Connector.open (fileName, Connector.READ_WRITE);

  {if (Connection.Exists ())}

  Connection.Delete ();
  }
  Connection.Create ();

  Thank you

  Anders

• Why changing Date and time?

  Hello
  Initially, I had a problem where one of my hotmail email accounts wouldn't sync and it came to light that my date and time were wrong. I don't understand why my time and date have been late and not the correct time and date. Is it possible that I can know why it happened or repair. The time and date are ok now.
  Thank you

  Check the settings of Date and time, language, and region of the Panel. It could be that the utility of time Internet is "correct" values.

• Date and time changes when restart

  original title: set time and Date?

  The time zone is set correctly, but the date and time are incorrect. If I change the Date and time manually the next time I turn on my computer, it is up to the wrong details. How can I stop this happening?

  Return to the date and time

  Click on change of time zone.

  Check the box for the hour record,.

  Click on the section of time Internet,.

  Click on change settings.

  Click Refresh now

  After check the box to synchronize with an internet server, save.

  Also post what she says, it's the time server.

  And your area.

• Export of bad date of Lightroom5

  Hello

  I used this lightroom for 2 years now, I have a problem with the export file on my hard drive it gives me the wrong date of the image, I took today 20/08/2016, after export, shows 19/08/2016.

  I check my phone date is correct and the date on my computer as correct, but the date on the photo show file I date late.

  Help, please

  Verify that the zones are correct in the camera and the computer.