Correction of secondary exposure?

Similar Questions

• I can't find 'exposure' and 'color correction' because the tabs have changed. It's very frustrating! Help.

  I can't find the tabs 'color correction' and 'exposure' Manual now that I updated to 10.2.3. It's very frustrating! Can someone tell me where are they now?

  Thank you!

  Since 10.2 color Correctiion is now an effect from the effects browser.

• Helps the exposure correction and Nikon D-90

  I just realized to my surprise that my Nikon D - 90 has had the exposure compensation adjusted to 2/3 EV for about the last year.  I was not aware of this.  I took some photos of a mile.  I'm not sure that understand what, if all the consequences it would have for me.  What, exactly, that means?  As I understand things, this means that all the photos I've taken are obliged to allow 2/3 of a stop underexposed.  Is this correct?  Can I change them all in Lightroom by changing the exposure compensation?  Should I try to do?  I don't want to cause further damage, but frankly don't really understand the interaction of my images and lightroom enough to know what to do (if anything) to fix it.  I would be grateful for all your comments/advice/help.

  EV units in of trshaner average response, Yes, but the link to the image-adaptive controls in the same meet means that approximately.

• Secondary color correction - color development.

  Hello. I use secondary color correction in Adobe Premiere Pro 2015.2 CC and can't adjust the color of an object. Uses a number of color correction tools, including hue, saturation, color balance, brightness/contrast. Am experimenting with one or more of them at a time but the best I can get is a sky blue very shallow, bright when I would have a deeper slightly grayish blue. Any advice, anyone? Thank you!

  Neil and Shooternz, thank you!  In fact, I went through many iterations of the video clip since then, try a lot of things, I don't remember exactly what are the effects that I used the first time, when I sent the investigation on this forum. I'll look to the lumetries for the General color correction and the wheel of the LGV. Thanks to you two!

• Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  «Click on the image and click on "clear cache for selection".»

  Try this out and let us know if this helps

• Secondary color correction

  I'm trying to use the "three way color corrector" - 'secondary color correction"after that I choose the specific color, I would like to correct and I tick 'show the mask', I get a blank white screen. Can someone tell me what is the problem?

  A white screen suggests generally that a color has not been adopted yet.

  Is the square of color to the left of the three eye dropper color that you have chosen, or is it black?

  Paul

  www.thepremierepro.com

• Sadness! Secondary color Correction mask does not not for me?

  The checkbox "Show mask", and now everything is white, no matter what I do with eye dropper, slides, swear. I feel I'm missing something simple. Noob. Update cc 2015 on Yosemite 10.10.4. Help? I learn everything I can about the color correction and it's such a slow and frustrating process for my brain! I start to understand things and could really use this tool right now!

  I apply us will tell, Three Way, to an item in the Assembly. I'm going up to the secondary color Correction, click View mask. It becomes white, which is very good. I then click the eyedropper and click a color. At this point, I expect to see a form of mask on this color. Nope. This all goes back to pure white. The effect is switched on. No idea why it does not work. I thought crying and laying on the floor, but first, I'll ask here in the hope that someone can save me please try this. I don't think it will work anyway.

  Hi Patrick,

  Have you tried to change the playback engine Mercury of Cl open to software only mode of file > project settings > General.

  Vinay

• No wider blur in secondary Correction?

  Why, in the field of corrections secondary blur level and noise there a maximum of 5 and 1 respectively, while the same tool on the front has many more and allows the best correction? It's the downside that I see compared to davinci, who acts more like first correction secondary, sorry my English

  Had not worked not with the secondary correction in PrPro, as... which isn't my natural way to see a UI, Three-Way I guess. Prefer largely what I can do in SpeedGrade, with its wheels extended, chromatic & such... and heck, it is a spell of 12 poles compared to this...  But I'm went & tried.

  You are right that there is a lot of smooshing that can be done with these controls. Well well, in the new version some time next month or so, some of the features of SpeedGrade are 'coming over' in the new workspace PrPro color, and of course, you can use the three-way with it to your heart's content.

  I just pulled... 4? ... secondary on a clip last night in the Official Journal. A hidden, no hidden three. Worked beautifully. What really miss me in the Sg is a hue/tint control... one that allows you (similar to that of the Colorista or in Lightroom) 'catch' a tint and map it to/in a different tint. So you're Orange may be more less yellow red, still less blue cyan blue magenta less green... and the saturation of shift even time & luminance of this color.

  Neil

• Secondary VI close does not correctly

  I use a secondary in my program that opens in the loop of the consumer. When the program stopped referring to the VI secondary school is closed, however when I then open the vi that I run in high school I can not open it as it is still in memory or something. This means that I have to close all LabVIEW just to switch to VI. Does anyone know why my secondary VI is not closed properly?

  LabVIEW 14.0

  Thank you

  
  

• best way Basic correct video exposure?

  I saw a different way to make corrections but what is the most popular way to make simple corrections to videos in the timeline? (exhibition, black, brings light, contrast, brightness...)

  Is there also some nice plugin that makes the operation better than effects video standard?

  Thank you!

  1. in the function on the images and the necessary corrections. But don't use anything AUTOMATIC.

  2 S.redgiant Colorista and Magic Bullet Looks are popular, like Color Finesse of synthesis.

• Documents are not correctly displayed in compatibility mode and exposure compensation is reduced to 1/3 of the previous length.

  For no discernible reason, my documents suddenly started appearing in compatibility mode when they were previously saved as docx.  At the same time, the paper began to appear about 2/3 of the screen down, leaving only a small vertical rule and about 3 inches of space to type on, so that the entire page is previously appeared.  The screensaver or the part My Documents present in the space above the document.  Everyone knows this?  Analyses of virus are clean.

  Hello

  I suggest to perform the system restore and check.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• secondary color correction 12 poles

  Previously, I submitted a feature request for the "primary" of 12 poles color controls is available on seconday layers in SpeedGrade.

  
  

  Is there any other way to limit the precise controls of the primer coat in a HSL key (or in its outer part)?

  It would be extremely useful for not only having very limited offset and gain when to isolate a specific color in a shot.

  
  

  Thank you!

  Unfortunately, it is not all possible ways right now.

• Re: After the secondary display (Beamer) system recovery will not work

  Hello

  I had a problem with my Thosiba laptop! (Detail of the system name follows... later)

  I saw the first time that the sound chip of Yahama is disabled (disapper) caused by Windows Update and I
  couldn't find a way to recover / install the correct driver.

  So I decided to... abandon with timewasting and start the system recovery process.

  After recovery finished... the sound was so back and during the update process (Windows)
  ... he ' has been disabled again, but this time I could install the new correct driver.

  After that I withdraw my notebock installed to work (her again) I connect a projector
  the connection of secondary vga... and what a surprise
  the projector doesn't show ANYTHING... before that it always works

  Anyone an idea what could be the reason for the error?

  My system runs XP Home (updated to SP3 and corrected)
  The SAL is a GeForce G 400 (installed the CD-Rom driver)
  ... I could not download the latest driver vga... because he had a temp. problem with Webaccess
  I get the rigt ip-installation (just FYI you)

  If you need more details please ask... I will answer all right, I can

  Thanks to all how to read this (and full of hope help out me)

  This message is from Germany... you could read in English!

  > I had a problem with my Toshiba laptop! (Detail of the system name follows... later)
  Why later? Can you put a laptop model name?

  However, the laptop can switch to the external video port using the FN + F5 key combination.
  Please check this!

• Satellite Pro A120 - Second hard drive on secondary IDE channel

  Hello

  I have a Satellite Pro A120 xp sp3.
  I tried so it can recognize a 2nd hard drive on the secondary ide channel, but it will not. CD player has been removed and replaced by one of them, the with the pata to sata interface.

  [http://newmodeus.com/shop/index.php?main_page=product_info&cPath=2_27&produc ts_id = 245]

  The second hard drive is a 500 GB seagate sata drive. Drive is spinning and powered but not appearing is not in the Manager of management or storage device.

  In the Bio (uptodate), it shows me it but won't let me change it.

  The readers of e/s
  Built on the disk HARD = serial ATA port 0
  CD rom = secondary ide (170H - IRQ 15)

  For me, the material is able to support two HARD drives that you remove the cd player, but it seems that the bio is me locking out the deselection of CD-ROM on the second IDE channel.
  Please could someone point me in the right direction to solve this problem.

  Thank you
  Zander

  Hello

  I read this story carefully and to be honest I m not sure if a second HDD (instead of the STRANGE) can be used

  My knowledge the IDE second controller does support all the ODD (CD/dvd drive) due to different master/slave/c-salt settings.
  I think it's the same case, why the second HDD is not recognized correctly

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye