Corrector - set updated to the last CC PS on osx

Similar Questions

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  After update to the last version of the space bar no longer give me hand tool / to navigate around my image, everyone knows this? Even for the button on my wacom pen...

  ... computer update restarted... everything seems to work again.

• Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you

  File management preferences is where you can change the number. I don't know the maximum.

• Safari slow after update to the last El Capitan

  Hello!

  After the last update El Capitan (April 16), Safari has been slow. For example, goes from one URL to another usually take one or two seconds and takes up to 15 seconds. First of all, I thought that my cable provider was the culprit but then I tried a different browser (Firefox) and it is never slow, even if Safari is still waiting to load a page.

  I also noticed that nsurlstoraged in the activity monitor is consuming a lot of CPU when I'm under Safari, but not when I'm in Firefox.

  I tried to disable all extensions in Safari as well as connection points disabling (where there is a conflict somewhere), but it does not solve the problem.

  I really prefer Safari on Firefox, but for now I need to run Firefox just to get the work done.

  Any thoughts on where to go from here?

  Thanks in advance for your help.

  Armand

  Troubleshoot the Safari plug-ins... (not the same as Extensions)

  Go to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

  If it does not help the process of nsurlstoraged, try resetting the SMC as mentioned in a similar discussion here > CPU Load from NSURLSTORAGED

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm having a problem with the update of the last security update. What can I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: problem getting my pc to download the latest security update

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Floyd,

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install?
  What error do you get everything when trying to install updates?

  In addition to the information required:

  How to view the log of update windows

  Click Start, and then click Run.

  in the Open box, type%windir%\windowsupdate.log

  and then click ok.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.

  start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

  on the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the windowsupdate.log file:

  http://support.Microsoft.com/?kbid=902093>

• Error code: code 80072EE2, computer will not update, since the last big update.

  Original title: 80072EE2

  computer will not update. also wdi prob host service. a lot of prob since the last big update. need help

  Hi Denny,

  We may refer to the article and check if it helps to solve the problem.

  Windows Update error 80072ee2

  Otherwise, you can read the article and try the steps to solve the problem.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

• X 51 R2 Ethernet does not not after update to the last W10

  So my Windows 10 upgrade works really well, but after the update (may be a coincidence) the Ethernet port no longer works.

  If I go to Device Manager there is no warning. I did the W10 check for update of the driver but there was nothing.

  I swapped autour cables with my Smart TV and he is always able to access the internet, so it is not the cable or switch.

  I booted up a Live Ubuntu disc and it has been able to access the Internet by Ethernet so I guess this isn't a hardware problem.

  I rolled back to Windows 8.1 and it still does not work, so at this point, I guess the update knocked out using some driver Ethernet the X 51.

  I do not have any third-party antivirus installed, just everything what comes with Windows 8.1/10.

  Anyone else does?

  Well duh. When I got to Windows 8.1 I don't check the Device Manager. Of course after the deactivation and reactivation of the Ethernet card it works.

  So, I guess that if someone finds this - here's how to fix your Ethernet if the W10 update knocked out the last two days.

• Recent file list is not updated with the last update of PS.

  In the last update of Photoshop CC, the list of recent files is not updated. The new splash screen, nor in the list once inside the app. He showed an old list and the list remains the same. I even deleted the list and he brought back the old list even when I reopened Psalm

  My version is: 20151114.r 301 x 64

  I am on Windows 7

  Have you cleared up the recent file list of file > open recent item > clear recent file list

  ~ Assani

• Patch Set updates and the version number

  Oracle document 854428.1 , Patch Set updates (UAR) for Oracle products, has this to say about the version number:
  
  2.3 version reference for easier tracking
  Oracle combines a version number of the hotfix. The fifth database version number is incremented for each power supply. For example, the original POWER supply is version 11.1.0.7.1, the second power supply for version 11.1.0.7 is 11.1.0.7.2 and so on.
  
  My DBA just told me that they applied PSU3 to our database, that was the version number 11.2.0.2.0. I checked the version number after the power supply has been applied, but it is always the same:
  
  SQL > select version of v$ instance;
  
  Version
  -----------------
  11.2.0.2.0
  
  The PSUS are changing the fifth version number or not?

  You can query sys.registry$ history and check the comments column to find the power supply applied. It is updated when executing the step according to patch (catbundle.sql).

  Published by: user7861302 on October 8, 2011 17:24

• ViewObject attribute is not updated to the last LOV

  I met the problem with LOV. Following the use case.
  There is a form where the user fills fields and selects values from the lists of values.
  Just after the user change the last mandatory attribute, triggers valueChangeListener on and values are to be stored in the database.
  I noticed that the last attribute is not defined in the view object (it is not yet defined, I guess, because valueChangeListener is triggered before). I have to manually set.
  This way, I have to get a LOV access and retrieve the selected value somehow. How can I do this? Is it possible to have this attribute set before the event to change the value?
  
  Just in case, here is the attribute and the part definition LOV in myVO.xml
  
  < ViewAttribute
  Name = "ROrgtype".
  IsPersistent = "false".
  IsNotNull = 'true '.
  PrecisionRule = 'true '.
  Type = "Oracle.jbo.domain.Number"
  ColumnType = 'NUMBER '.
  AliasName = 'R_ORGTYPE. '
  Expression = "R_ORGTYPE."
  SQLType = 'DIGITAL '.
  LOVName = "LOV_ROrgtype" >
  < DesignTime >
  < name Attr = "_DisplaySize" Value = "22" / >
  < / DesignTime >
  Properties of <>
  < SchemaBasedProperties >
  < LABEL
  ResId = "LABEL_ORGTYPEEO_NAME" / >
  < CONTROLTYPE
  Value = "choice" / >
  < / SchemaBasedProperties >
  < / properties >
  < / ViewAttribute >
  
  
  < ListBinding
  Name = "LOV_ROrgtype".
  ListVOName = "OrgtypeVO1".
  ListRangeSize = "-1".
  NullValueFlag = 'none '.
  NullValueId = "LOV_ROrgtype_LOVUIHints_NullValueId".
  MRUCount = "0" >
  < AttrArray Name = "AttrNames" >
  < point Value = "ROrgtype" / >
  < / AttrArray >
  < AttrArray Name = "ListAttrNames" >
  < point Value = "Num" / >
  < / AttrArray >
  < AttrArray Name = "ListDisplayAttrNames" >
  < point Value = "Num" / >
  < point Value = "Name" / >
  < / AttrArray >
  < DisplayCriteria / >
  < / ListBinding >
  
  Thank you!
  
  Published by: euggie on November 9, 2009 06:04
  
  Published by: euggie on November 9, 2009 06:05

  Hello

  You can delay your valueChangeListenerEvent. Try this code:

  if(event.getPhaseId().equals(PhaseId.INVOKE_APPLICATION)){
        //Your code here
  }else{
              event.setPhaseId(PhaseId.INVOKE_APPLICATION);
              event.queue();
  }
  

  in this way, your code will be executed during the Invoke application phase.

  Hope this helps

  Joseba

• Why a notifier ask me to update Aurora when I am already updated to the last Aurora?

  -Pop-up notifier to the lower right corner

  Aurora is not one version of Firefox that you thought. Is the name of one of the channels of development.

  Development before then every night--> Aurora-> Beta-> then the output channel. When Firefox 10.0 is released the 11.0a2 will be move/merger of Aurora to the beta channel.

  Aurora gets patches that can happen every day and sometimes have gaps of two or three days between the two updates is that when there are archives. Check-ins for nightly frequently enough that it is pretty well every day and sometimes has a respin in the same day.

  Aurora is not really intended for users of Firefox, but for testers and those who understand that he often gets updates.

  Before and after an update type on: to the location (address) bar and you'll see there's a new date of construction. There are also updates on the 29, 30 and 31 Dec.

  Your UA to present Mozilla/5.0 (Windows NT 5.1; rv:11.0 a 2) Gecko /20111228 Firefox/11.0a2

  After updating today, it would be
  Mozilla/5.0 (Windows NT 5.1; rv:11.0 a 2) Gecko /20120101 Firefox/11.0a2