Correspondence of time remapping with ramps for video editing of first CC 2015/output

Similar Questions

• Mac Pro: more RAM or better video card for video editing?

  I'm going to buy a new Mac Pro for video editing in first Pro CC, but can't decide if I should ad more cores, more RAM or a better graphics card.

  Intend to change the RED 4 K files.

  Hello

  I'm certinaly not an engineer who can comment on how applications are written and how can hearts of processor they can write effectly, but there has been a lot of comments to the Mac Pro (new), and to answer your question, based on what I read, there were comments that the 8 basic model is good for video editing - not too , nor too little.

  Being an editor, I'd always put my money to get the best graphics cards and the largest amount of RAM that you can afford.  For work, we've been specing on new models and it was the 'formula' we follow.  With the exception of the RAM, sounds like once you buy, your clerks to the material with the new machines.

  I found the review below to be a great resource that can help answer your question.

  AnandTech | The Mac Pro Review (end 2013)

  Hope that helps and good luck with your purchase.

• IMac with Fusion Hard Drive - HD Setup for video editing

  Hello

  I just ordered a new iMac with the following specifications just for video editing:

  iMac 27 "Quad - Core Intel Core i7 3.5 GHz

  8 GB RAM

  3 disc Fusion to - [I] I got this configuration with the merger of 3 TB for much due to the fact that it was a mixed open-box, otherwise I would of went with an SSD. [/ I]

  NVIDIA GeForce GTX 780MX with 4 GB of GDDR5

  My question is: what is the best way for me to set up my hard drives (Cache OS, programs, file, media, media, projects, previews, exports, etc.) for editing with this iMac and hard drives that I own?

  I currently use a combination of a HD Lacie Raid - 0 6 TB and 1.5 TB OWC FW - 800 Raid-0 for video editing on my MBP that has a 750 GB HD SSD and oem.

  iMac installation:

  3 to Fusion: operating system, programs, parallel

  6 TB Lacie Raid: video/media storage disk

  1 TB OWC USB 3 external:

  Several OWB FW - 800 external references:

  I might consider to get a 1 to Lacie thunderbolt HD, though it will have a significant advantage.

  I'm intent on obtaining a raid of the Rainbow-8050 somewhere down the line, but that is out of my budget right now.

  In addition, I already know the standard of the guidelines for the use of the disc which is in the link below, but since the iMac cannot be configured with multiple HDs, I'm looking for suggestions of knowledge of people with this type of installation.

  [url] http://forums.Adobe.com/servlet/JiveServlet/showImage/2-2906955-31395/guideline+disks.jpg [/url]

  Thank you

  I'm already a user of Areca (32 terabytes on Raid6). As you have a capable TB2 iMac that I would wait for the next version of the Areca 5080 TB2.

  I suggest you a configuration of data 3 step; for example the project files on an external drive and Fusion cache on external SSD and based on external Raid 0 and as the third step one backup (BR, external drives, LTO, basically everything what is available or practical).

  HB

• Can I use an AMD APU with a R7 250 X for video editing?

  Hello

  I'm looking at building a portable PC for video editing. I just wanted to get feedback on my system specifications and how it my perform. I intend using this mounting system (Adobe Premiere) and video audio recording.

  CPU: AMD A10 - 7850K 3.7 GHz Quad-Core Processor

  Motherboard: Gigabyte GA-F2A88XN-WIFI Mini ITX FM2 + motherboard

  Memory: Corsair Vengeance LP 8 GB (2 x 4 GB) DDR3 - 1600 Memory

  Storage: Samsung 850 EVO-Series 120 GB 2.5 "Solid State Drive

  Storage: Hitachi Travelstar 1 TB 2.5 "internal hard drive 7200 RPM

  Graphics card: XFX Radeon R7 250 X 2 GB Core Edition video card

  Thanks in advance for the help!

  Intel will give you more bang for the bucks.

  Some interesting reading

  What kind of PC to use?

  I know that the main objective here is Premiere Pro but still...

• How's this for a specification of PC for video editing at home?

  OK - we decided to get the new PC now, focused around the decent performance for editing video at home when we do.   Any comments on the bottom would be greatly appreciated.  I tried to put in my 'principles', but as you note, I've highlighted a few issues around these.

  
  

  Principles
  
  
  * Computer decent for video editing - so when we do he want it to be reasonable from a performance point of view (don't no annoying).  Also want insurance for the video data that a single HARD drive crash does not mean data loss.
  
  
  * Hard Drive Configuration - take RAID 1 for data
  • C: 500 GB - OS (1 x 500 GB)
  • D: 500 GB - Swap area for o/s (1 x 500 GB)
  • E: RAID 1 redundancy for data (2 x 1 TB)
  * 64 - bit Windows 7 Pro
  
  
  * Questions about the principles
  1. Is it really useful to have a separate drive (drive D :) for Swap?
  2. Y at - it no real need to have a drive F: (another) for exports?  It's non-real time so it shouldn't be a question need?
  3. No improvement major re tell the SSD C:? (or not worth the sum of $)
  4. SATA II and SATA III readers? (I assumed that both are ok when picking)
  
  
  The Spec
  
  
  • CPU - Intel Core i7 960 processor 3.2 GHz, 8 MB Cache CPU LGA1366
  • Motherboard - Gigabyte GA-X58A-UD3R X 58 + ICH10R QPI 6.4 Gbit / s DDR3 2000 PCI - Ex16 SATAII SATA3 USB3.0 RAID GLAN ATX
    
  • RAM - Kingston 12GB 1333 MHz(PC3-10600) KIT (3X4G)
    
  • Video card - NVIDIA GTX560 - OC of Gigabyte GTX560 1 G GDDR5 PCIE DualLink DVI [? corresponds to the motherboard / is - this an exaggeration?]
  • RAID card - Adaptec AAR1220SA-SGL SATAII RAID0 1 JBOD/2 PORT/low profile/PCIEx1/OEM/No cables [? is this ok - looks cheap?]
  • Drive (no RAID) - 2 x 500 G Western Digital RE4 SATAII 7200 RPM disk HARD Enterprise 64 MB [? only SATAII is ok not?]
    
  • Case - CoolerMaster RC-942-KKN1 HAF X 942 black No. PSU [? this is an exaggeration - someone just took recommendation here?]
  • Power supply - Corsair HX-850 ATX Power Supply w 140mm modular cables [? power ok?]  Yet once just took a recommendation?]
    
  • O/s - 64 bit - Microsoft Windows 7 Professional 64-bit OEM (Microsoft OEM terms & conditions apply)
  
  
  Note - I'm looking at the local site following re where the source if this helps: http://www.umart.com.au
  
  
  

  
  

  Jeff,

  Thanks for that!

  Greg,

  Continues on and still pretty clueless on the elements...

  -video card - I don't think that the elements has the Mercury Playback Engine (MPE) available (someone please confirm here), so a way less compatible video card may suffice; I didn't suggest that

  -J' forgot to mention before, cooler provided Intel dump and go with at least a Cooler Master 212 model; It is best to keep your CPU cool, and if ever you want to dabble in Overclocking of your i7-950 (harm has a very good guide for beginners of Overclocking on this forum) a 3rd party cooler will be essential

  -2 WD 2 to 64 MB black should be good for a RAID1 data reader

  Or...

  First Pro CS5 update, go with the MSI GTX 460 Hawk (overclock to 850 MHz) and the massive profits of EMT! Maybe someone here can comment that used before elements with needs similar workflow that he might stand to gain?

  Jim

• The new iMac 4 k is ready for video editing?

  I want to buy the new iMac 21.5 ' 4 K for video editing and Im not sure if its Integrated GPU or the rest of the hardware can handle the work. I usually work with 1080 p video, but I've read that its GPU is quite limited. Please I need help.

  You will have no problem using the iMac of the retina for editing 1080 p video. The 27-inch model includes a GPU dedicated with its own memory, however. You decide: http://www.apple.com/imac/specs/

• 2016 budget PC for video editing and animation

  I am building PC mainly for video editing and animation (suit Adobe, Maya, etc.).

  I7 6700 k, z170 pro gaming, 16 GB of RAM Gskill, evo Samsung 256 gb SSD, 2 TB WD Blue, Dell u2515h.

  I'm really confused, choose the budget videocard, CPU cooler and wardrobe.

  Budget: Around $ 1500 (Indian Rs 100000.) Intend to buy this month.

  Note: With good performance, I want dead silent.

  Thanks in advance.

  I have not read any problem of heating with the gtx 1060, only with the reference cooler on the rx 480. the series gtx 1000 added support for 4 k hdr and wcg, if you don't need those then the older gtx cards are always great to use. the 1060 gtx may be 40-50% faster than the gtx 960 and both are rated 120 watts. If your creative work who need a lot of power gpu, the gtx 1060 with a mid to low workload has a better chance to keep fans and be completely silent. I don't know if the model bill recommends is able to turn off the fan, but with a design unique its radiator fan will not be able to run passive as a biggest fan of double or triple design card. If you are more concerned with budget and plan on only using a few gpu accelerated fx and only HD projects, the gtx 750 ti 2 GB or 950 models 2 GB may be powerful enough for your needs. you would have to see what are the prices where you shop, here all the series 900 gtx cards cost too close to the gtx 1060. I don't know when will be released the gtx 1050, but it can help to lower prices on 900 gtx cards. the gtx 1050 can be around or just below the gtx 960 for the performance.

  the corsair website says the 100R will support 150mm height max cpu cooler, so it should be 90 to 120mm air coolers. you will need to check the dimensions of the cpu cooler you are looking for, to make sure it fits. It would also be good to search online if others use the casing and cooler together. cryorig h7 seems to be 145 mm in height, then he could adapt. I don't know the price for coolers here, so you will need to see those that fit your budget and look at reviews for cooling and noise levels to find the best. If you went with a larger case, it would be able to hold a 140mm cooler air and be quieter. coolers liquid AIO got better when they first came out and last usually a few years before the pump breaks down, or he flees. If an air cooler does not, he would need a new fan and would not risk damaging any material. If the case was too thin to allow a good air cooler, then the liquid would be appropriate, but I would choose replace the case first. the corsair 100r site says it will hold only a 120mm cooler liquid. It should be a 240mm or more large cooler liquid for a chance to be quieter than a good air cooler.

• What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  Not really related to Prem Pro, however:

  Neutral gray scale to set the brightness (white saturation) and contrast (black crush).

  Conveniently located:

  Gamma: 2.2

  White point: 6500K (5800K with ambient lighting)

  Brightness: 100-120 (cd/m)

  Use a calibration device like SpyderElite (above applies). Grade with a neutral gray background low light level - easier on the eyes.

  Claire

• Portable light for video editing?

  Hello

  I'm going on a long trip to Asia where I'll do a video on the go a lot. I'm open to Mac or PC, with a preference for PC. Can anyone advise me on the best weight for the compromise of performance?

  I thought I'd go for a Dell XPS 13 with this configuration:

  • 3rd generation Intel® Core™ i7-3537U processor (4 M Cache, up to 3.1 GHz)
  • Windows 8, 64-bit, English
  • 13.3 "FHD 1080 p
  • 8GB¹ DDR3 Memory SDRAM at 1600 MHz
  • 256GB Solid State Drive
  • Intel HD 4000
  • 2.99 lbs

  I'm a bit wary of the Intel HD 4000. The rest looks pretty good to me, what do you think?

  I don't need first-class performance, but I don't want to fall asleep on my Pad Thai in waiting for the rendering of base effects.

  Thank you very much

  1. A laptop is always a compromise and can not outstanding performance.
  2. Only 8 GB of memory is a serious drawback, 16 GB would be much better.
  3. Only a single SSD is not enough. You need at least one other 7200 RPM (e) SATA disk or drive USB3 for media.
  4. You need a power outlet to power the additional disk and one for the laptop, because the battery is not the last long enough under the heavy.
  5. The Intel HD 4000 card STINKS for video editing, especially compared to 1 + GB VRAM and nVidia with CUDA.
  6. The i7-3537u is only a dual core 2.0 GHz.

  The best you can expect is a system that is part of the bottom 5%, at least 30-50 x slower than a fast system. Be aware that when a fast system needs an hour to export a timeline, this laptop will need three or four days for the same work. Another reason, that you need from this socket. See reference PPBM5

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• Keyboard for video editing CS4/CS5

  People,

  Can you recommend a keyboard for video editing with PrP CS4/CS5?

  My budget is $ 150, but it would be interesting to have a look also at the more expensive keyboards and their benefits.

  Thank you

  I bought a keyboard for $59 just google it bit there. I have the bella pro that does not work my shutlle becaue I use two PCs with the same monitor with the Iogear switch. I use this shuttle pro and it's great. Take a look it's about 49 for the shuttle

  http://www.VIDEOGUYS.com/item/contour+design+ShuttleXpress+ (Silver) / 44545 8535355425058554C 558435.aspx

  http://www.VIDEOGUYS.com/bundle/Bella+advantage+series+20+keyboard+for+Adobe+Premiere+Pro+ with HD + mouse + (PC) / 474.aspx

  http://www.EditorsKeys.com/adobe_premiere_pro_shortcut_keyboard.html

  http://www.EditorsKeys.com/

• Satellite 1800 Series, upgrade for video editing

  Is it possible use you my Satellite 1800 for video editing. (pinnacle studio 8/9)
  I now 256 MB in use, HD is original and the processor is the processor INTEL celeron-995 MHz.
  And is it possible to replace the DVD on a DVD - RW
  Thank you
  John

  The my Satellite 1800 Series drive is fixed mounted, yours is too (I think). The only way to change the disk is to go to the next dealer Toshiba one ask him if there is a reader, that it might recommend.

• I want to use adobe creative app in windows xp for video editing system

  I want to use adobe creative app in windows xp for video editing system

  Some additional information:

  First items 12 and some other old versions must run under XP. If you really want to buy an older version, I see that they are available at some retailers like Amazon.

  If you end up buying a new computer, your options will be first items 13, Premiere Pro CS6, or subscribe to the creative cloud single app or another plan. Be sure to check the system requirements first.

  System requirements | Adobe Premiere Elements 

  System requirements Premiere Pro

  System requirements | Creative cloud

  Guinot

• 970OC GTX or Quadro K2200 for 4K video editing in first?

  I have that I'm trying to decide which card would be the best for video editing. I've seen a lot of discussions that say contradictory things

  If you have a (very expensive) 10bits monitor you the Quadro... otherwise, just what I read here, said a card GTX performance for less money

  Also read Page Tweakers

• Updated for first CC 2015, output presets are missing

  Updated for first CC 2015, output presets are missing, can you help me? There was a long list of presets, output for YouTube, Vimeo, Sony etc., a long list...

  If you're after the standard list then try to launch Adobe Media Encoder CC2015 first, then try first.  Don't forget to set the h.264 format you consult the relevant presets in this format.