cosmetic issue

Similar Questions

• No search button in the system page in the Page value models Setup - TMS 14.3.1

  I'm trying to push Configuration templates to several systems on my MSD selectively, using the Serach system option in the option "Set it Systems ' Configuration model.

  

  When I type a name of any system for the first time, I click search option and be able to find this system.

  When other name of the system are typical for the second time, TMS does not show the search key.

  

  Seems to be a cosmetic issue and seen with all browsers.

  Bug ID: CSCun15404. Note that it may take a day or two until it is visible in the Bug Toolkit.

  Kjetil-

• VSAN membership down on the CF mapped uplink port

  Hello

  Since I upgrade Cisco UCS Manager, all frame and fabric of interconnections of version 2.2 (1), I have a few minor flaws.

  I configure ports 31 and 32 as FC uplink ports and mapped each port to a vsan:

  Port 31 = VSAN 'blue '.

  32 port = "red" VSAN

  (I know, it is not common to map two different VSAN to the same fabric, but I have to)

  Since the update, I get minor flaws:

  31--> FCoE or FC uplink port is broken on 'red' VSAN / membership-down

  32--> FCoE or FC uplink port is broken on 'blue' VSAN / membership-down

  I have no channels of port FC or FC enabled link mode. Interconnection of fabric is EHM.

  Even in other tissues.

  Can anyone help me or is it the same cosmetic problem as stated in the quote?

  FCoE Uplink vsan membership fault for any vsan not configured upstream Symptom:
  
  Fabric Vsan Membership Down fault message on FCoE uplink ports
  Severity: Major
  Code: F1083
  Name: Fabric Vsan Membership Down
  Conditions:
  Observed with UCSM 2.1 and when FCoE uplink port is configured on the Fabric Interconnect
  Workaround:
  None.Error message is cosmetic.
  

  Thanks in advance

  / Danny

  Hello Danny,

  Yes, it is a cosmetic issue in UCSM 2.2.1

  the question is followed by

  https://Tools.Cisco.com/bugsearch/bug/ CSCum89468

  The one that you cited ( CSCud81857 ) is specific to the rising FI FCoE in version 2.1 of UCSM.

  HTH

  Padma

• RADIUS - Dest buf 512 more small then data len len 759

  I would like to ask that the community on RADIUS error connect 4.2 ACS (0) buld Patch 124 12:

  [079] message EAP valuse: Dest buf len small 512 data then len 759.

  Is this critical error that has deeply an EAP conversation between the authenticator and server?

  Where could trigger the buffer length?

  Hello

  It is a cosmetic issue and shouldn't cause problems.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsh37811

  Kind regards

  ~ JG

  Note the useful messages

• 5.2 Cisco ACS system alarm [Collector]

  Hello

  I have a problem with my ACS 5.2 General reports, if anyone can help would be great.

  We have two ACS 5.2 primary and secondary. Both work fine, but have an alarm to the General reporting system.

  list '(too long) value '.

  I have attached the screenshot of this error.

  At this point, we use GANYMEDE device of authentication only, no RADIUS. These servers are sync both conf are the same.

  Don't know what exacly causing this system error, can anyone help on this.

  Thank you

  David

  This has been observed when an accounting packet is received on the device of the ACS and lacks the attirbute class. However it is a cosmetic issue and there is no bug on this. If you want to have someone look at this and addressed if please collect newspapers of debugging at the level of DURATION and mgmt-acsview newspapers and open a service request on when the problem occurred.

  You can do SSH to GBA, then issue the command acs-config, connection with web references, and then publish a newspaper of the show debugging, if all levels are set to warn, then issue-journal of debug runtime level perform a debugging, debugging acsview mgmt-debug log level.

  Repeat for both servers, once the error is present, please download a package of support.

  Please open a service with this information request and we will be more than happy to help.

  Thank you

  Tarik Admani

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• TVos 10 - Apple TV 4 (Wifi issues)

  My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

  have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Backup issues after upgrade to iOS10

  Dear users of Apple,

  I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

  1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

  2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

  Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  Does anyone know what this answer is invalid can be?

  Do I have to change the settings in my phone or iTunes?

  Help please!

  Thank you very much

  Deven

  Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

  Get the latest version of iTunes - Apple Support

• A 2 month old iPod Touch 5th generation began to lose its charge the battery overnight.  East - the developer of a battery issue?

  A "renovated" old 2 months iPod Touch 5th generation just recently started losing its charge the battery during the night.  East - the developer of a battery issue?

  Perhaps. Where did you buy this device?

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN