Could not access the internet via third party application

Similar Questions

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Satellite A110-277: can not access the internet wireless

  Hello
  I have a Toshiba Satellite A110-277. We have wireless internet access in our House and it was workin fine, but since a few days I can not access the internet. My laptop is certainly recognizing internet connection wireless, but through IE or Firefox it just does not connect.

  For some reason, he worked briefly through Firefox, but then that stopped. I don't see what anyone, I have done differently, other than (finally) updated Windows Media Player, but why would that cause problems, I don't know!

  I would really appreciate help as soon as POSSIBLE, that the internet is my lifeline to work!
  Thank you
  GcDh

  Hello

  You said
  > My laptop is no doubt recognize the wireless internet, but does not connect via IE or Firefox, it's just
  Hmm, I guess that you can connect to the WLan router and can insert the WiFi encryption key successfully right I'm right?

  How does LAN connection? Can connect you to the internet using the LAN cable?

  Feedback would be appreciated

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• The user * address email is removed from the privacy * could not connect, could not access the directory.

  For the second time in the last two weeks going through my event logs, I noticed several hundred newspaper failed attempts at the course over a period of twenty minutes.  they are random user accounts that don't exist not user 1, user 2, www., or just names at random, the papers say newspaper caused by a wrong password or account.  "the first of these events several connected has this message:" user * address email is removed from the privacy * could not connect, could not access the directory. ».  What does that mean?  Do you need access and control my computer?  Any info would be a great help.

  Looks like someone trying to log on your computer.  Check your firewall settings to make sure that they can't.

  Visit https://www.grc.com/x/ne.dll?bh0bkyd2 the site "shields up" to perform a check.  Some people to dismiss the guy who runs it, but the test doesn't show you which allows your computer to the world to see.

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.

• Could not access the value of the component off ValueChangeListener

  In many cases, I need to use the value of some UIComponent during execution in many places in the application. But the problem is that I could not access the value of the component outside the ValueChangeListener of this component. I tried to store this value in a temporary local variable, I also tried to use the opportunity to link , but it did not work.

  This thread changes made on the ValueChangeListener can't think where else
  

  said I should go ahead everything in the ValueChangeListener but is not useful in my case and it's really limit my choice later.

  So question is: How to access the value of the element external ValueChangeListener?

  I use Jdeveloper with ADF 11.1.2.3 technology

  Hello

  You can create a bean (depending on the application, choose the scope), add a variable with accessors and then use it in the 'value' property of the component.

  Arun-

• Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

  Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).

  Hello

  Please refer to the instructions mentioned in the link below, it should help:

  Cannot install Creative cloud installation - error code 46

  "Setup could not access a critical file. Please try to reinstall. (error code: 46) »

  Stop creating cloud download

  Let us know if this was helpful.

  Kind regards

  Bani

• Why my blu - ray player can't access the contents of third party internet?

  I've owned my reader blu - ray Sony BDP-S580 for about a year and a half and have had no problems with it. A few days ago I noticed that it would link is no longer to third parties including Netflix, Youtube, and Amazon Instant Video internet content. I connected wireless and thought I just needed to recycle my router and the modem (I have a modem from Time Warner Cable and a Linksys Wireless G router). I tried several times, but it made no difference. Whenever I try to start, Netflix, Pandora, Youtube, etc it is unable to connect to each time. I noticed that the player can always connect to Gracenote. I can access Web sites using the integrated in the web browser. I can also stream videos to my PC blu - ray player using the Windows Media Player server. It's just the video and music internet services that do not work.

  In recent days I've done everything I can think of to fix it, but nothing worked. I tried the modem and the router of recycling at least 20 times. I tried to use the wired facility rather by connecting the drive blu - ray directly to my router by an ethernet cable. I have the router configured so that it's not requre the use of Wi - fi protected setup, but I even tried to set the blu - ray player using WPA configuration just in case. I changed the IP address on my router. I reset all the settings of the blu - ray player to factory default settings. I also tried to do a power reset the player. I tried to use "personal information Initialize' who have

  erases all personal data (including all content of third of the unit). None of the above worked.

  I also want to mention that none of my other wireless devices have problems connecting to the internet. In addition, the blu - ray player is about a foot away from my router for the intensity of the signal is not a problem. My router is configured to allow up to 50 devices to connect to it and there are currently only 7 devices that use the connection Wireless (including my roommate). My internet connection speed is 54 Mbit/s, so I don't think speed is the question. The blu - ray player said that the RANDOM connection and internet access are correct. The blu - ray player network connection diagnostic tool says that network connections are correct. My firmware is updated and the player is registered with Aurélien Live Essentials.

  Thank you for taking the time to read my post. Any suggestions would be greatly appreciated.

  I'm having the same problem.  Player has worked wonderfully for the moment I got it almost a year.  He began to do last night.  Rebound, the speed of the network, reset the player to the factory and let it sit unplugged for 15 minutes.  It connects to the network and access to claims that it has internet and connection LINK, but the status of connection to the server provisionsing failed.  Streaming from other LAN devices work, the Web browser works, none of the work of third party services.

  Where are you located, and who is your ISP?  I'm in Central Virginia on Shentel.  Nothing has changed from hardware wise. The modem is Motorola Surfboard SB6141.  It's a modem ONLY... no router functionality.

• Safe mode, so I can not access the Services via a Normal startup.

  Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup.
  CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
  No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
  I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.

  * original title - problem of catch-22 with Vista freezes *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows XP:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Can not access the Internet following couldn't reinstall Vodafone dongle software

  I am running Vista Business Edition. I have a Vodafone dongle for mobile Internet access with my HP laptop. The associated software wouldn't load yesterday. I uninstalled and tried to reinstall it. Impossible to reinstall. Since then I can't access the Internet. I can get on my network wireless but no Internet. I tried to get Vista to fix the problem but the joy. I tried system Restore to four different restore points and none have worked. Suggestions, please?

  Falco,

  'No Mo' is just that this issue could be better addressed by Vodafone. Please check with them to see if they have a solution to your problem:
  http://www.business.Vodafone.com/site/bus/public/enuk/home/p_home.jsp

• Could not access the Windows Installer service

  I am tring to install .NET Framework 2.0 and windows gives me an error saying that my Windows service install could not be accessed

  I'm tring to appear on an error message received when I tried to download .NET Framework 2.0 it says could not access windows service install and I need this program to the someone can help?

  Hello
  1. are you able to install other programs?
  
  This problem may occur if one of the following conditions is true:
  1. the Windows Installer files that are on your drive hard are missing or are damaged.
  2. you install or remove a program that uses the package file to install software for the Microsoft install (MSI) Windows (.msi).
   
  To resolve this problem, use the following methods.
  Method 1: Reregister Windows install.
  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.
  2. at the command prompt type msiexec /unreg and then press ENTER.
  3. at the prompt, type msiexec/regserver, and then press ENTER.
   
  Method 2: Disable the .NET Framework 3.0 before installing .NET Framework 2.0
  Microsoft .NET Framework 3.0 is the default version built into Windows Vista. We recommend that you first cross check if it is enabled in the Windows features turn on or off. To do this, try the following steps.
  1. click on start, type optionalfeatures and press to enter.
  2. in the verification of the list if .NET Framework 3.0 is enabled or disabled. If it is enabled, disable it and restart the computer.
  3. install .NET Framework 2.0 and check the result.
   
  Method 3: Install the latest .NET Framework.
  1. visit the following Web site and download the latest version and install it.
  http://go.Microsoft.com/fwlink/?LinkId=120486
   
  For more information, see this link: http://support.microsoft.com/kb/942288
   
  NOTE: Don't forget to follow method 2 to activate the .NET Framework.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• VPN established but the customer can not access the internet... Need help.

  Hi all

  I'm trying to get a functional ASA 5505 appliance but does not always succeed. I managed to get connected to the ASA VPN client, but once connected, vpn client cannot access the internet. I am trying to route traffic from the client to the VPN server so I don't want to split tunneling. Here is the sketch of the testbed of the network:

  DNS:210.193.2.66
  |
  |
  Inside   ---------  Outside                         ---------          -------------------
  192.168.1.1 |         | 202 *. *. 84 202.*. *. 1.         |          [                  ]
  ---------------------- ASA |-------------------------------------  GW  |----------[ INTERNET ]
  |                   | 5505.                    |                |         |          [                  ]
  |                   | --------|                    |                 ---------           -------------------
  Host_A                                          | 202.*. *. 83
  192.168.1.5                                -------------
  | NetGear |
  | Router |
  --------------
  | 192.168.2.1.
  |
  |
  HOST_B |
  Physical addr:192.168.2.2
  Addr:192.168.3.1 VPN

  The ASA 5505 config is as shown below:

  Output from the command: 'show running-config '.

  : Saved
  :
  ASA Version 8.2 (1)
  !
  ciscoasa hostname
  activate 0cMYKRmmOdVhcSr4 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 202.*. *. 84 255.255.255.128
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  inside_nat0_outbound list of allowed ip extended access any 192.168.3.0 255.255.255.224
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool vpnpool 192.168.3.1 - 192.168.3.20 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 202.128.171.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.1.0 255.255.255.128 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  enable client-implementation to date
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.5 - 192.168.1.20 inside
  dhcpd dns 210.193.2.66 210.193.2.34 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  Group Policy Reveal internal
  Group Policy attributes Reveal
  Protocol-tunnel-VPN IPSec
  username password alice tnbrh7ICan8mnq/Y encrypted privilege 0
  alice username attributes
  Strategy Group-VPN-Reveal
  tunnel-group Reveal type remote access
  tunnel-group reveal General attributes
  address vpnpool pool
  Group Policy - by default-Reveal
  tunnel-group show ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:bfb0083a8eb2416e9cc27befe3b224d9
  : end

  a few thoughts

  permit same-security-traffic intra-interface

  NAT (outside) 1 your pool of vpn client

  ASA sysopt connection permit VPN

  ASA sysopt connection permit-ipsec

• Comments (Ubuntu) can not access the internet through host (XP)

  I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection

  I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.

  Welcome to the community,

  I think the problem is that my host and guest use different subnet masks default...

  Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.

  André