How to filter messages on MCB2300 CAN?

Similar Questions

• How to filter messages simpleChat (private chat)

  So I tried to find a solution, but after several hours, I can not find how do.

  My use case:

  There is a single host for a room. Others in the room can speak to the host, and users can see their private chat with the host. Users can see the chat component only when the host is connected.

  The host uses another application in which he can see the list of users who speak of him. It can select a user from the list, and he sees a simple conversation with only messages between him and the selected user.

  What I finished (I think it may help others in the future and maybe, there is better way to do):

  * In the user application: use the userManager your ConnectSessionContainer property. There an arrayCollection named collection hostCollection on hosts that are currently connected.

  In my case, I put the components of cat in a container and use a link visible property:

  visible = "{connectSession.userManager.hostCollection.Length > 0} '"

  You can also add an event listener for the userManager and listen to UserEvent.USER_CREATE and USER_REMOVE and check if event.userDescriptor.role == 100 or again controlled the hostCollection.length of the userManager.

  * If you simpleClass of subclass, you can access the _toCombo which is the drop-down list of the chat area.

  You can set its visible to false and set its selectedItem property on the first object of its dataprovider whose role is equal to 100 in order to force the cat to be private with the host.

  * In the host application, you can create a list using the ConnectSessionContainer.userManager.audienceCollection as a dataProvider for a list of users.

  It is easy to set the combobox control to simple to talk only to the selected user conversation, but what I have not been able to do is to filter history to only show that the conversation with the selected user and no other messages, without creating several rooms.

  I looked in the source code, but the historic property of the simpleChatModel is just a string and do not find an easy way to filter.

  I was looking for an arrayCollection collection nodes in the history, because I could use the filter property of the collection, but I did not find.

  So, where should I look for, and what is the best way to filter history using the recipient_Id?

  Thank you for your help...

  Sorry for the long post, but maybe this will help someone in the future...

  Hello

  What other parts you have been doing is perfectly fine. So, I think on

  on the side of the host you want to filter so that when a host, you select one

  user and click on it, it should show only chat between this user and

  the host.

  Although there is no direct way that by default, show us all messages to the

  realized a user cat, but again I can give some advice.

  What you need to do is change the method of formatMessageDescriptor

  SimpleChatDescriptor or subsclass it.

  Try to maybe add another parameter to this function as

  public void

  formatMessageDescriptor(p_msgDesc:ChatMessageDescriptor,p_targetedUserID:String=null):Stri ng

  and when you create an object of SimpleChat, ensure that in calls to

  This method, you pass somehow user ID only the user that you want to

  See messages with. In a more general way, this setting may take a

  array that contains only users whose desired cat IDs

  for display in a window.

  Inside the function, make sure that filter you to do something

  Like this

  If (p_msgDesc.recipientID == p_targetedUserID) {}

  you would add these messages

  } else {}

  do nothing to make the message back «»

  }

  If you use a table of targetedUserIDs, then a check of the loop if

  He allied himself with the recipientID and if so, adds this message.

  It should work in your case. We are planning a complete overhaul of cat

  in the future (period of next year), at that time there I'll definitely keep

  your suggestion of the spirit.

  Let me know if it works for you.

  Thank you

  Hironmay Basu

• How to filter messages displayed

  I'm used to be able to filter the messages that I have a display by the printer model. This feature seems to have disappeared. I didn't want to have to browse the pages of messages twenty other printer models to problems that are not for my model. He has been a research field that offers the ability to search only 'on this forum. I could enter my model number and see all of the messages on my printer only. Beautiful star - bring it back.

  The upper-left search box that says "Research community" default actually looking for the forum, in that you are.  If you pass a level it searches in all printers & all-in-one forums, and another level, it would be searc all of HP consumer forum.  You can also enter a search term and click OK.  You will then have an additional option, including search by author, date range, including forums, of messages with congratulations, positions with Accepterd Solutions and other elements.  On this page, you can also click on advanced and more options.

• How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  Messages or e-mails?

• That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  PS will be only savePSD files up to 2 GB. You need to save in the form of a BODY.

• To use the same filter messages on multiple computers

  I have three computers running thunderbird at different places in the world. I am using IMAP so I have all the emails anywhere. Now, I would like to run the same filter message on any one of them, but I can't export/import the message filter as I have copies of my filter. What should I do?

  I found the file differently as you indicated.
  There is no account option that you made on the Tools menu of thunderbird.
  However choose the localfolders file, you can select accountsettting. There's the localfolder displayed directory.
  Now, I see also the otherway. In the menu choose options (tools not), you can select the account settings and then select in this local folder menu and it displays the local directory as in the other method.
  The rest is as you said, thanks.

  Sorry, I copied the 'msgFilterRules.dat' folder, but nothing has changed. In fact when I delete this folder Thunderbird still remember the filter rules. They must be somewhere else on my computer...

• How to filter uploaded duplicate pictures in "Photos".

  How to filter uploaded duplicate pictures in "Photos" (in order to remove duplicates)...?

  Usually, Photos should you cannot import duplicates. It will give a warning if you try to import an exact replica.  You are importing different versions of the same photos?

  Photos has no tools to search for duplicates. You would need a third party program to analyze the library of Photos of duplicates.

  I can recommend these:

  • Pictures of power will detect duplicates, if the file attributes are the names of files, identical for example. See this link:

  https://www.fatcatsoftware.com/powerphotos/

  Independent detection of duplicates, it is a great tool to use in combination with pictures.

  • PhotosSweeper is very versatile for find duplicates in a different state of the edition or the size. It will detect cropped versions of the same photos, or reduced in size, as it will compare the photo, not only the attributes of the file: http://overmacs.com/photosweeper.html
  Re: Hi anyone know if there is an easy way to delete photos duplicate in my library in pictures?

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• How to read messages from a blocked number?

  How to read messages from a blocked number?

  You do not have.

  You need to unlock and then you can read the messages that comes after unlock it.

• Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Start the OS X App Store, then click on the item toolbar updates. V5.6.1 pages should be available, and this will open documents Pages ' 09, ' 08 and ' 06. In messages to this community, you should always share what version specific pages and OS X that you are currently using.

• Topology change syslog, how to disable messages?

  I have a number of switches BNT/Lenovo (8124, 8052, 8264) and all are connected to our central syslog server. I have quite a few switches in the same vlan, and I get a lot of topology messages of change like this:

  2016 03-11 T 05: 39:01.143556 - 07:00 Mar 11 05:39:07 switch-1 ALERT switch OS : STG 44, changing topology detected

  I don't necessarily need to see this. I would like to delete this message without Gohan other messages such as the STP root bridge changes. Is this possible? These seem to be my options from the side of the switch:

  8052b Journal (config) #logging?
  all all
  BGP BGP
  cfg Configuration
  cfgchg Configuration change notify
  CLI command line interface
  Console Console
  difference of Configuration monitoring difftrak
  dot1x 802. 1 x
  failover failover
  Hyperlinks Hotlinks
  IGMP IGMP-Group
  IGMP-mrouter IGMP mrouter
  applicant applicant IGMP IGMP
  IP Internet protocol address
  IPv6 IPv6
  LACP Link Aggregation Control Protocol
  system port link
  LLDP LLDP
  management management
  MLD MLD
  NETCONF NETCONF Configuration Protocol
  Time protocol NTP network
  OpenFlow enable logging of Protocol Openflow
  OSPF, OSPF
  OSPFv3 Ospfv3
  private - vlan, private VLAN
  RMON remote monitoring
  Syslog server server
  SLP Service Location Protocol
  Spanning-tree-group group Spanning tree
  SSH Secure Shell
  System
  Vlag Virtual Link Aggregation
  VLAN, VLAN
  VM Virtual Machine
  VRRP Virtual Router Redundancy Protocol
  Web Web

  I looked in the CLI guide for "journal of logging", but all I get is the following:

  [None] Journaling log []
  Displays a list of the features for which syslog messages can be generated. You
  can choose to turn on or off specific features (such as VLANs, stg, or ssh).
  or enable/disable syslog on all available functions.
  Control mode: global configuration

  There is no detail on the option does what exactly.

  I know that I probably can filter messages from syslog server-side but I would rather start the level for the switch.

  Thank you.

  Today, there is no way to delete these specific messages.

  They should not be too many and are often very useful to determine the cause of a failure.

  In order to reduce drastically the TCN BPDU is to put all the host ports such as 'edge' or 'portfast '.

  This setting prevent BPDUS and messages production when a host disconnect or connect to the switch.

  Then, only the 'real' TCN is recorded and useful for diagnosis.

  Ciao, Maurizio.

• How to filter the traces of tension TDMS after acquisition?

  Simple question. We have acquired a lot of electrophysiological data with express signal. We now need to filter data after the acquisition for later analysis. I can import the files TDMS tension of previous experiences, but can't seem to run the filters we used on the side of the acquisition to filter the existing traces. Is there a simple way to do this?

  -smb

  Hello Chinchilla,

  I enclose a few screenshots on how to add a step to an analog input filtering. You can select the type of filter and order too.

  

  In this screenshot you can check how to change the configuration of the filter

  

  Finally, you can access the TDMS of LabVIEW file with one of the examples of PDM. Please follow these instructions:

  1. open LabVIEW

  2 - go to help > find examples to open the Finder 'example '.

  3 - Go to Fundamentals > file Input and Output > TDMS > Standard Read and Write and select the VI named TDMS read Events.vi

  

  You will need to know the data present in the file to read correctly. For this, you can use the leading PDM Viewer VI:

  http://zone.NI.com/reference/en-XX/help/371361K-01/Glang/tdms_file_viewer/

  Or you can use the Toolbox for excel: http://www.ni.com/example/27944/en/ (allows you to transfer the data to Microsoft Excel).

  4. After reviewing the data, you will need to apply a filter. You can find the filter functions in the range of Signal Processing.

  

  Please let me know if you have any questions on this subject.

  Kind regards

• HOW TO FILTER DATA IN MICROSOFT ACCESS

  HOW TO FILTER DATA IN MICROSOFT ACCESS BASED ON THE DATE AND TIME AND GIVE THE RESULT IN A TABLE?

  I need a few examples of files, can someone help me please?

  Fix your keyboard. If it has not been broken, be a little more polite and stop screaming.

  Research, are thousands of examples on the web related to the jet and sql database. This is a very basic select statement. Access to a query wizard that can then show the sql code. If you don't know how to design a query in access, you need a Basic for this tutorial. No question of LabVIEW here.

• To free up disk space, Outlook Express can compact messages. This can take up to a few minutes.

  Every few minutes the message:

  "To free up disk space, Outlook Express can compact messages.  This can take up to a few minutes. »

  It is irrelevant for two reasons:

  (1) I do not use Outlook Express and have therefore no messages to be compacted.

  (2) I have not free disk space as I am currently using only five percent of the very large disks.

  Is could someone please tell me how I get rid of this very irritating message.

  Try to reset the compact County in the registry:

  1. Start the registry editor.
  2. Open this key:

     \Software\Microsoft\Outlook Express\5.0 HKEY_CURRENT_USER\Identities\ {identity}

     where the identity is a string of letters, numbers, and dashes.

  3. The value of Compact Check Count to 0.
  4. Close the registry editor.

  For more information, see why you should let Outlook Express Compact Messages when it asks you .

  WARNING: Incorrectly editing the registry can damage your system and prevent Windows to start. Before you do, back up your important data, make a restore point and make sure that you know how to repair a damaged system. Boulder computer Maven
  Most Microsoft Valuable Professional

• I get an error message that Windows can not find a certificate when I try to use my Verizon's MiFI Jetback.

  I have a Verizon Mi - Fi Jetpack.

  I have a Verizon MI-Fi's Jetpack.  It works fine on my Windows 7 computer, but on this computer (Windows XP with Service Pack 3), I get an error message that Windows can not find a certificate.  It won't let me connect even if it shows excellent signal, etc.  Need help.  Thank you

  Hello

  1. when exactly you get this error message?

  2. What is the model of the unit?

  Check if the device is compatible with Windows XP by referring to the user's manual.

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.