Could not connect to the desktop PC.

Similar Questions

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• "Could not connect to the server Game Center"

  OK, so here's the deal:

  Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?

  iPhone 3GS, iOS 6.1.6

  Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!

  Nevermind, it seems to have fixed itself.

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.