Could not detect my DPS and hdd with Esxi 6.0

Similar Questions

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Boot failure: REM could not detect 2 hard drives

  Hello. I bought a HP Pavilion G6 series laptop (LX273EA #ABU) last year and he stopped to load correctly. When I click on "Repair (recommended)" I get an error messaqe saying "REM could not detect 2 hard drives. I tried to start in safe mode and it will not work.

  The laptop is two months out of warranty, and the only support option I found is a phone call from £30 with no guarantee of assistance. Any input would be appreciated.

  Thank you

  Michael McDonald

  You are welcome Michaelmcd85.

  The 305 error indicates that the hard drive has failed. You will need to replace the hard drive.

  This is an easy repair so I'll give you the information you need to fix yourself. It's your interview Guide &. It contains information on how to disassemble the laptop. The guide also contains information that will allow you to choose a replacement hard drive.

  If you do not want to repair the laptop you can contact HP Support directly to the 1-800-4474-6836 if you are in the USA / Canada. If you are in another country, you must first visit HP's Support around the world to find the coordinates for your region.

  I hope this information is useful.

• Bluetooth could not detect any device

  My Device Manager could not detect the bluetooth device. and if I search my bluetooth icon bluetooth device, it pairs with my device bluetooth and shows connected but after awhile, it shows not connected.

  HP model p027tx, windows 8.1

  Please help me.

  Hey Afonso-abs,.

  Thanks for the update.

  Try this:

  1. Go to devices and printers.
  2. Right click on the device icon and select control.
  3. Click on sign out and then sign in.

  Also, make sure that both your phone and Bluetooth hardware is on detectable.

  Your computer may be defined as detectable by right-clicking on the Bluetooth icon in the system tray, click on show settings and check the Allow Bluetooth devices to find this PC box.

  Let me know if it helps.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• Windows could not detect a dial-up modem

  Win 7 trying to get the dial modem to work.  When you try to set up a connection from the network and sharing Center numbering, I have 'Windows could not detect a dial-up modem.

  Modem is properly installed in the Device Manager and power light is on.  I know that the modem works because I tested it on a backup system.

  My research of troubleshooting led me to check Remote Access Connection Manager, which does not start and causes error 1068.

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security/firewall software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable the Windows Firewall:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 2:

  Try to activate the Remote Access Connection Manager dependency services and check if it helps.

  Follow the steps to enable the Remote Access Connection Manager dependency services:

  a. Click Start, type services.msc in the search box and press ENTER.

  (b) in the services window search for addiction services:

  Secure Socket Tunneling Protocol Services

  Telephony

  Internet connection sharing

  Remote Access Auto Connection Manager

  Routing and remote access

  c. right click each service one by one and start the services.

  d. make sure that the problem is solved.

  Also read the following article from Microsoft and check if it helps.

  http://support.Microsoft.com/kb/827328

  Note: it also applies to Windows 7.

  For more information, see the following Microsoft articles and check if that helps.

  Install or remove a modem:

  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-modem

  Advanced dial-up settings:

  http://Windows.Microsoft.com/en-us/Windows7/advanced-dial-up-settings

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Modems: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/modems-frequently-asked-questions

  Hope the information is useful.

• Could not update CC Photoshop and after effects CC

  Could not update CC Photoshop and after effects CC, what to do?

  had problems with Photoshop and after effects CC CC, but received a new deatualizacao of notification for all my applications in 2014 and updated normally now, thank you...

• Desktop computer can not detect the wireless router, even with adapter

  Hello

  I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

  Help, please. I can't afford a new laptop close to Christmas it :(

  Hello

  • You have security software installed on the computer?

  I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/870702

  You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• battery is not detected, plugged in and not charging

  Hello

  I have problems with charging the battery and my Windows 7. When starting, the battery is detected in the BIOS and load (led lit without flashing). As soon as the computer stops on my drive HARD and Windows loads, the light starts flashing, indicating that the battery is not. In Windows, the battery meter displays "no battery detected" or "plugged and no charging current.

  At first I thought that my battery was simply grow old, but accident I forgot to plug in the power adapter and the computer came out of the battery for ~1.5h, even if Windows does not recognize a battery. This still applies, which I have not found a solution for another.

  I tried to run the material off another copy of Win7 and the same thing happens. I did not have time to try Linux or Windows XP, since I don't own or. I also tried to uninstall the battery ACPI Control Manager device, but without success.

  Any suggestion would be great, because I have not found that any forum messages similar to the following. 

  Sincerely, Clarence 

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  ============================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ============================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  =================================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Second SATA hard drive not detected by Bios and Device Manager

  Original title: second SATA hard drive

  Hard drive not detected by the Bios and the device under Vista Home Premiun Manager

  Hi trinitario,.

  Because the hard drive is not detected in the BIOS also, it may be due to a hard drive configuration that should be changed or a rider. If you need to get in touch with a Local tech-store for assistance.

  Note: change in the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is helpful
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My beta1 application does not open when compiled and run with the beta 2

  I somehow updated my alpha and IDE, now my only problem is that when I launch my app it begins to open on the alpha but omits to say could not load library libbb.so.0, I'll do some research, but if anyone has any ideas?

  Thank you as always.

  I also had problems during the upgrade to version BETA 2.

  My application will compile fine but when run in the Simulator, it would break indicating: 'CODE of ERROR 8 '.

  What I have done is to create a new application of Cascades and simply copied over the old files in my new project (with a change of name here and there).

  This fixed the problem.

• BlackBerry Smartphones DM6 does not detect my phone and will not leave!

  Hi, I posted my problem before and have also seen other users posted the similar problem before but the haven had a bit of luck to find a solution...

  I've tried almost everything to try to clean uninstall including deleting the files in the records of the registry etc. etc. of DMs all restart and reinstall. always my DM 6 does not detect my phone but my windows has no problem see my phone.

  I had to just uninstall and go back to DM5, that worked perfectly. Fact that it works on DM5 allows me to avoid any malfunction of the equipment.

  Finally, I noticed that there are out there with this problem, users have also hurt close the DM6. whenever we try to close, it just hangs there and we must close it manually using the Task Manager. I hope that the details given will be able to help technical support troubleshoot a kind of solutions.

  I'm perfectly fine with the help of DM5 but my future plan is to change my phone for the BB Torch. And with this current problem I won't be able to get my torch to work on DM6 on my computer. I hope we can get some sort of solution.  I am running windows XP sp3

  I hope to have news from the blackberry support team soon.

  Hello again,

  I don't know where you got this information... If it is true that perhaps your carrier will not be able to solve the problem, what they can do is to climb your case up to the FRAME. It is the only channel through which you can get a 'free' RIM on any question support (including this one).

  See you soon!