MFP Pro-M125nw: remove printer border (white-margin space)

Similar Questions

• OfficeJet Pro 8625: Remove printer OfficeJet

  I need to remove a printer HP OfficeJet Pro 8625 (8620) laptop.  The printer is a shared Ethernet network device.  I guess I have to remove both the printer itself (via Control Panel) as well as the associated software (drivers HP).  What is the correct order for this (first remove the printer or remove the first HP software)?  Is there anything else I need to do?  I want to completely remove the OfficeJet from the laptop, as it was never there.  I then reinstalled the printer from scratch on the laptop.

  Thanks for your help on this issue.

  Hello

  First remove the HP software from the control panel > Unisntall a program.

  Removing software will remove probably any existing device as well.

  Only if a queue of the remains of printers and printer peripheral slot select Remove an instrument to remove.

  Kind regards

  Shlomi

• Crop many PDFs "Remove white margins" with an AppleScript in Acrobat 10 Pro

  I am just learning to work with applescript, but I'm stuck with the next task. I have a lot of PDF files in a directory for which I have to harvest: "remove white margins." I use Acrobat Pro 10. Any suggestions would be greatly appreciated.

  AppleScript Acrobat of control is described in the Acrobat SDK kit, you absolutely need. But it is very very limited. Most of the features are available in JavaScript. Fortunately, AppleScript can execute JavaScript.

• LaserJet Pro M125nw MFP: Nightmare Web Service Setup for my HP printer

  I want to activate the Web Service for my new printer...

  I connect to the portal of the printer by using its IP address and go to the tab Web of HP Services. When you click on the button Activate I randomly through the following behaviors:

  -"Connecting...". "forever (really, forever)

  -Message "information will be printed a document" and he never gets printed

  -Connection (without other information) error!

  If I use the special button in the pannel for my printer to get the address of electronic mail of course a progress bar keeps here forever...

  I tried the manual IP settings, DHCP settings, wireless and wired connections. Reset the router, printer, as many times as my patient can tolerate.

  I'm really sorry to say this, but I'm furious and I think that such a buggy feature should not be released. I can't believe that such a bad product has reached the market. Very disappointed.

  Hi @mauriciojost

  Welcome to the Forums of HP's Support. I understand that you have a problem with the activation of the Web Services.

  After reading what you have tried, I noticed that you did not mention setting a manual DNS. Try to set the manual DNS and see if it helps.

  Primary DNS address: 209.244.0.3

  Secondary DNS address: 209.244.0.4

  From my experience, this address works best with LaserJet.

  Additional troubleshooting can be found here: Pro Tips: Troubleshooting printing and scanning to Email Issues in e-all-in-one printers

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Where is the function "remove white margins"?

  The previous version of Acrobat was a parameter in the print window that allowed the white margins from a presentation of cultures. This feature went to DC.  Where is he?

  You can find an option for the same establishment:

  Tools-> print-> Set Page boxes Production-> remove white margins

  Please see this link:

  Harvest in Adobe Acrobat DC PDF pages

  Thank you

  Girija

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• MFP HP LaserJet Pro m125nw: MFP HP LaserJet Pro m125nw Scan software for Windows XP

  Hello

  Can I ask you if there is a download location for the scan for the MFP HP LaserJet Pro m125nw HP software as the unit didn't come with a CD.

  On the product page there is a driver listed for Windows XP, but the software is not available for download.

  Product page:

  http://support.HP.com/es-ES/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/solutions

  The product manual:

  http://h10032.www1.HP.com/CTG/manual/c03628466

  Thank you very much.

  Best regards

  Ryan

  Hi Ryan,

  Download and install the full software features below, which include the software of HP scanning as part of the package:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-124819-4&cc=us&DLC=en&LC=en&OS=228&productOid=5303404&sw_lang=&product=5318091

  Kind regards

  Shlomi

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• HP LaserJet MFP M127fw Pro do not print

  Just bought a M127fw of MFP HP LaserJet Pro and is about to return it for a refund.

  While it will print a diagnostics page and the copier seems to work, it will not display a wireless information page, and I can't seem to print a document from my PC, phone, ePrint or any other method.

  I tried to print the information page of the front panel of the printer as well as the web server.  In both cases, clicking the button simply does nothing.  The printer displays no message indicating a problem.

  I have connected the printer to my Ubuntu PC (tried JetDirect/AppSocket and IPP), but the print job hangs just with "treatment" or "stopped".

  I have connected the printer to my Android phone, but just printing crashes.

  I have connected the printer to service of HP ePrint (using the email address listed by my printer).  Here it shows 'Problem with printer', which is my only indication that something is wrong.  The site directs me to check the front panel of the printer for more information, but there is nothing there.

  I don't know what else to try here.

  Resolved in this post: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-LaserJet-Pro-MFP-M127fw-will-not-print-anything-except/m-p/3836740/highlight/false#M52766

• MFP HP LaserJet Pro m125nw Scan software for Windows XP

  Hello

  Can I ask you if there is a download location for the scan for the MFP HP LaserJet Pro m125nw HP software as the unit didn't come with a CD.

  On the product page there is a driver listed for Windows XP, but the software is not available for download.

  Product page:

  http://support.HP.com/es-ES/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/solutions

  The product manual:

  http://h10032.www1.HP.com/CTG/manual/c03628466

  Thank you very much.

  Best regards

  Ryan

  P.S. This thread ahs been moved from Laserjet multifunction and all-in-one. -Hp moderator of the Forum

  It seems that you can order media or download a basic driver, at least for Windows 8.

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/drivers

• OfficeJet Pro 6830: Remove old HP printer connected

  I just received and installed a 6830 JO reconditioned to replace under warranty.  I want to remove the old connected HP printer, but REMOVE PRINTER link is grayed.  Any suggestions?

  Hey @racerbrb,

  I see that you have some problems with the removal of your old connected HP printer. For this issue, you will need to contact HP Cloud Services directly. You can do this by clicking on this link and fill in the form below. If you have an instant account of ink that has been saved to your original printer, make sure you leave the chat or phone agent know immediately so that you get to the correct service.

  Please let me know if they are able to help you with the removal of the printer. If you get all solved, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Color Laserjet M177FW MFP PRO cannot connect to web services

  I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.

  First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.

• How to adjust an image to the size of photo paper to print without white borders

  I have a digital camera coolpix LR26, I am trying to print photo size 5 x 7, when I print border blank sheets of paper and does not match the image of the entire book. I tried the adjustment at the option of the page, print preview and always white and borders even worse on one side. How to adjust it without having to crop the image in windows paint. I have a HP deskjet 3050 printer has in a series of J611.

  I have a digital camera coolpix LR26, I am trying to print photo size 5 x 7, when I print border blank sheets of paper and does not match the image of the entire book. I tried the adjustment at the option of the page, print preview and always white and borders even worse on one side. How to adjust it without having to crop the image in windows paint. I have a HP deskjet 3050 printer has in a series of J611.

  ======================================
  As FoxFifth says... the HP deskjet 3050 a does not support borderless printing.

  See the following HP specification document:

  HP deskjet 3050 has
  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06b/18972-18972-238444-1142650-410635-4311836-5061081-5061083.html?DNR=1
  Scroll waaaay down to: Photo printing

  However... to answer your question... in order to print a specific without size
  distort the photo (compression or stretching) the photo will have to be
  printed with an app that can automatic cutting suitable or you have cultures
  the photo using image editing software.

  Picasa free software can print in specific sizes but if the automatic cropping function
  Removes a part of the photo is unacceptable... you would still
  to make your own size pre-harvest.