Could not find the meaning of ' ~ ' (followed by a name of file in particular).

Similar Questions

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?

• "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

  #corrected "tehe systerm could not find the environment option" in the title

  "the system could not find the environment option"

  Hi nickzino,

  (1) what is the complete error message you receive?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Method 1: Let flow the fixit available in the link below and then check

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)

  I'm getting the following on my database warning
  Is is a serious question
  Please suggest some solutions...
  
  
  D:\oracle\product\10.2.0\admin\orcl\bdump\orcl_lgwr_4972.TRC dump file
  Mon Jan 21 16:59:27 2013
  ORACLE V10.2.0.4.0 - Production of 64-bit vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Windows NT Version 6.0 Service Pack 1
  CPU: 16 - type 8664, 16 physical cores
  Process affinity: 0 x 0000000000000000
  Memory (success/Total): Ph: 61324 M / 65533 M, Ph + FCP: 176683 M / 193356 M
  Name of the instance: orcl
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 8
  
  Windows thread ID: 4972, image: ORACLE. EXE (LGWR)
  
  
  NAME OF THE SERVICE :() 16:59:27.654 2013-01-21
  SESSION ID: (880.1) 2013-01-21 16:59:27.654
  tkcrrsarc: (WARN) could not find the ARK of message (message: 0 x 1)
  tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0 x 1)
  Maximum record size redo generation = 156160 bytes
  Redo size maximum generation change vector = 150676 bytes
  tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)
  tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0x10)
  23:56:18.591 2013-01-21
  WARNING: Log write time 550 m, size 1 KB
  00:37:43.391 2013-01-22
  WARNING: Log write time 1180ms, size 2 KB
  09:42:03.185 2013-01-22
  WARNING: Log write time 550 m, size 2 KB

  Have a read of metalink 375229.1

  It says that this message is informational only, so it is safe to ignore.
  He also hit the value of log_archive_max_processes to more than 10 can solve the problem
  Finally, they say that it is a bug that is corrected in different versions. Then maybe an upgrade is in order?

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Could not find the ColdFusion component or interface

  I get an error 'Could not find the ColdFusion component or interface' when I try to call CF feed or http methods, for example:

  localtest.httpService = new http();

  Results in the error, 'Cold not find the ColdFusion component or interface http'

  I have two CF 9 instances that are running on the same machine (Windows Server 2008), both running the latest patch (patch 2). The two cases raise the same error. I have another separate server running CF 9 (does not have the hotfix 2 installed) and it can run code very well. I guess feed() and http() are defined in an Adobe ColdFusion cfc in the CFIDE directory somewhere, but I don't know which because they are encrypted.

  When you say "mapped" do you mean "with a CF mapping? If Yes, what is the mapping and where?

  On my install CF9, I've got a custom tag path defined, that points to the cfusion/customTags directory, which in turn contains the com/adobe/coldfusion dir, which is where the CFC is. It's the out-of-the-box config.

  Due to the track being defined custom tag, all files within this subdirectory structure can be treated without any other path, such as:

  new http()

  A mapping to CFIDE won't help you, because the files are not in the dir of CFIDE. And even then, say you had a map to cfusion/customtags called "/ foo", you would need the path access to the CFCS in your code:

  new foo.com.adobe.coldfusion.http)

  (or have an import statement that precedes the new statement)

  --

  Adam

• "Could not find the good (s) below referenced in the catalogue:" error found in the catalog.

  I created a catalog in the catalog for the workspace folder to the same location as the Default.cxml is. I created a library of service interfaces and a library for implementations of service following the instructions in the http://help.adobe.com/en_US/enterpriseplatform/10.0/AEPDeveloperGuide/WSabb771403789c7a3-3 1e63d5312fb7375fac - 8000.html #WSe851854fd1e0856a3adf5f4513046ea7dc4-7ffe. When I use the annotations described my service and the interface library interfaces are added automatically.

  When I deploy my catalog there is no error. I use CRXDE Lite and go to the/content/mosaic/catalogs / [my catalog name] and I can see my interfaces and classes in this service.

  I have create a new Flex for ADEP experience Services and selected the catalogue project that I created. In here, I create a new style sheet in the package of style sheets, and it is created in [project] / src/styleSheets / [name of the style sheet]. I have a right-click on the style sheet and selected "Compile CSS to SWF". My stylesheet is automatically added to the catalog.

  I try to deploy the catalog at this point and it gives me the error "could not find the good (s) below referenced in the catalogue:"and then lists my style sheet. "

  Is that what someone has had this problem and have an idea of what hole I'm fall in?

  I reinstalled Flash Builder and deleted the folder of crx-quickstart on Services of experience so he would have to rebuild.

  I am able to deploy the catalog with a specified pane. I created a stylesheet at the top level of the src folder, it did not appear in the catalog and the catalog deployed.

  I'm not sure what was the causes of the problem with the tiles. I saw it reappear briefly. I deleted the project and re-created and the problem disappeared.

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.