Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

Similar Questions

• The host 'POP3' could not be found: error number: 0x800CCC0D

  Original title: the host 'POP3' could not be found. Please check that you have entered the server name correctly. _ account: '1', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  The host 'POP3' could not be found. Please check that you have entered the server name correctly.

  Account: '1', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D.Can't send or receive emails

  1. wrong venue for your question.
  Repost of networking, e-mail and online forum:
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  2. I would assume that you did not have the necessary information to configure an e-mail account.
  Call your ISP (internet service provider) or your mail server. Ask them to give you the following:
  E-mail address
  Your user name
  Password
  Name of the incoming server
  The name of the outgoing server

  Also ask if they can help you set up an e-mail by phone account, or if they have a Web site to show you how.
  They might be able to do.

  If this is not the case, here's a tutorial:
  http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The host 'SMTP' could not be found. Please check that you have entered the server name correctly. _ subject 'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  The host 'SMTP' could not be found. Please check that you have entered the server name correctly.
  'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D.
  I'm answering an ad on craigslist and Windows Live continues to appear, but will not send my email I can be reached at * address email is removed from the privacy * or 614-499-1541.
  Thank you
  Stephen lawless

  Your post has nothing to do with Windows Update.

  You're not even close to have properly configured your e-mail account in Windows Live Mail.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  You will find support for Windows Live Mail in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error number: 0x800CCC0D, the host 'POP3' could not be found. Please make sure you entered the server name correctly in Outlook Express 6.

  Original title: "POP3" server could not be found...

  I get the following error message every time I try to use Outlook Express 6 as my default email: 'the host 'POP3' could not be found.  Please check that you have entered the server name correctly.  "Account: 'POP3', server: 'POP3', Protocol: 'POP3', Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D".  I have a Dell Optiplex GX110 desktop computer with a processor Intel Pentium III (996 MHz, 256 MB RAM).  I already know that I have to increase the amount of RAM, but I don't think this is part of my problem.    I am connected to a local network, Verizon (Internet, cable TV and phone package). I run Microsoft Windows XP Professional (5.1.2600) 2002 with service pack 3 version.  I check frequently that my system is configured to automatically receive all updates for Windows XP more updates from Microsoft.  QUESTION: Is there a version of Microsoft in September 2011 that had something to do with POP3 servers?  Obviously it did not automatically installed in my computer.  I even checked my system twice to make sure that Microsoft was on my list of safe sites.  Please help me.  I really want to use Outlook Express 6 as my default email.

  Thank you!
  George Raynes

  Hi GeorgeRaynes,

  1. were you able to use Outlook Express 6 correctly previously?

  2 have you made any hardware changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  Hope the helps of information.
  Please post back and we do know.

• The host 'SMTP' could not be found. Please check that you have entered the server name correctly.

  What I do when I get this message?

  The host 'SMTP' could not be found. Please check that you have entered the server name correctly.
  'SUBSCRIPTION', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  Hello

  I doubt that the fault lies in Internet Logistics (what this forum is about).

  I guess you have a problem with the configuration in your e-mail software (Outlook? Windows Live Mail? you don't tell us). Find tools, accounts or similar and triple to check the settings for sending server.

  Kind regards

  Hans

• Unable to send/receive emails, error: the host 'smtp' could not be found. Please check that you have entered the server name correctly.

  Original title: outlook.

  The host 'smtp' could not be found. Please check that you have entered the server name correctly.
  'Job', account: 'pop3', server: 'smtp', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D now that I signed up with outlook.com, I wish I had the other implemented to send emails, and anything else I might need to do. Is this possible without too much difficulty?

  If you use a POP3 account, you need an email like Windows Live Mail client to do. Outlook.com is Webmail.
   
   
  Help for Outlook.com is located in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=all
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• errors: the host 'smtp' could not be found

  original title: errors

  my computer is says the host 'smtp' could not be found. Please check that you have entered the server name correctly.

  Topic 'IT' was so hard to find you account 'pop3', server 'smtp' Protocol: SMTP, Port 25, secure (SSL): no, socket Error: 11001, error number: 0x800CCC0D. I don't know how to fix the problem and would appreicate greatly someone to help me.

  If your SMTP server is exactly as posted above, it's at least part of the problem because it is incorrectly shaped - that is certain - and usually identifies the specific server (although what you use may be correct depending on the provider).  Also, which seems to be an unusually worded message - which is exactly what he said or hat a translation?

  I recommend you to contact your email provider and confirm the appropriate settings for your e-mail program (did you guide step by step it) and see if that solves the problem.  They are generally very useful for settings of accounts properly.  It is probably just a typo or a parameter that is marked incorrectly or checked by mistake.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't send or receive messages for the IMAP account. The host 'IMAP' could not be found. Please check that you have entered the server name correctly.

  Can't send or receive messages for the IMAP account. The host 'IMAP' could not be found. Please check that you have entered the server name correctly.

  Server: 'IMAP '.
  Windows Live Mail error ID: 0x800CCC0D
  Protocol: POP3
  Port: 110
  Secure (SSL): No.
  Socket error: 11001

  You are in the wrong forum, if you cannot solve your problem here try

  http://explore.live.com/Windows-Live-Mail-Help-Center
  IMAP is a Protocol, you can use it instead of POP3, something in
  Let's not your e-mail configuration.  A mail server name is something like
  IMAP.example.org or SMTP.exemple.com or similar.

• 'The host 'POP3' could not be found. Check that you have entered the server name correctly. »

  Original title: "e-mail mistakes".

  Recently, we lost all of our information on our laptop and have had to reinstall Windows and unfortunately we lost data, emails etc.

  We are still after the reinstallation, this error to come (see below) when e-mail messages are downloaded.  Don't know what to do at this point, really need help.

  The host 'POP3' could not be found. Please check that you have entered the server name correctly.
  Account: 'POP3 (1)', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  "Trust" has written in the new message: * e-mail address is removed from the privacy... *

  Hi Bruce, I'm setting up account e-mail again, as for the mail server, in my opinion, bigpond is our mail server.

  I found a better link for you:

  http://BigPond.custhelp.com/app/answers/detail/A_ID/12611/kW/Windows%20Mail/SNO/1

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• "The hosted network could not be started."

  I recently bought a Samsung Galaxy S2 and when trying to connect to my Wifi network, I found that the signal from the router was not strong enough to reach the floor, and since I have a laptop connected with a cable that I thought I could make it work like a virtual router. After some research, I found several programs:

  I tried Connectify, which did not work. Then I tried Virtual Router, that does not work either. Then, I found this:

  http://www.techylabs.com/setting-up-a-virtual-router-in-Windows-7.html

  And it worked, the network appeared in the list on my phone. Unfortunately, when you try to connect, it got stuck on ' Optaining IP-address '.

  I tried to use a static IP address, and even with one put in place, it got stuck on ' Optaining IP-address '.

  After that, I have been clicking through the menus a lot and hit accidentally turn off somewhere. Since then, when I try to start the virtual router, it says:

  The hosted network could not be started.

  The group or resource is not in the correct state to perform the requested operation.

  I can't find the place where I hit the turn off, and I don't know what to do more :(

  Hello

  I suggest you to see link below and check if it helps.

  WiFi/SoftAP virtual fails to start with "the hosted network could not start" on Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/2625519

  Hope this information is useful.

• Wi - Fi connection error: the hosted network could not be started.

  Original title: need help Urgent

  I get this error message. I'm not able to start the wifi sharing in my lenovo ideacentre desktop. I'm not able to see the microsoft wifi adapater everywhere in my office, even in the Device Manager and the adapter option Add.

  C:\Windows\System32>netsh wlan start hostednetwork
  The hosted network could not be started.
  The group or resource is not in the correct state to perform the requested operation.

  Hi Siddha,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

• •EPMCSS-05261: could not get the information of the Aboriginal group.

  Hello

  Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

  I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

  «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

  Please could you let me know why we get this error message and no impact on the safety of the user.

  Thank you

  Michel K

  Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

  See you soon

  John

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.