Could not get the list of data centers

Similar Questions

• Get "Windows could not obtain the list of devices from Windows Update, please try again later"

  Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

  Windows Update is set to "Download updates but let me choose whether to install them".
  Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
  Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
  Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
  Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
  Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
  A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
  Thank you.

  .. .the printer I'm trying to install is a HP DeskJet 6122.

  You should have clearly stated that in your first post.

  See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

  more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

  Once again, good luck.

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.

• Windows could not get a list of devices from Windows Update. Try again later

  Original title: Windows 7 list printers cannot be updated
  I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

  I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

  What should I do?

  Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

  What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go back to served, right click on "Windows Update", and then select start

  Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

  Looking for what casues the error

  at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
  2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
  2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
  2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
  2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
  2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
  2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
  2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
  "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
  2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
  2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)

• DJ 6122 installation: Windows could not get a list of devices from Windows Update

  Try to load the printer driver for HP DeskJet 6122 on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say is another driver for DJ 990c driver required and is available by clicking on "Windows Update" in the dialog box, install printer driver. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

  These steps solved the problem:

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go to Manager tasks then Services, right click on "Windows Update", then select start.

  Then, return to the add printer function.   Be patient, it will take several minutes.  You will find that the C:\Windows\SoftwareDistribution folder has been rebuilt.

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• "Windows could not get a list of devices from windows update"

  I've been looking for a solution for several weeks now. Many people seem to have the same problem. But no one has yet been able to solve the problem.

  First of all, let me clarify the problem explicitly:

  In the Add Printer Wizard: "Windows could not get a list of devices from windows update"

  Specifically, the problem is that Windows Update *broken* in the Add Printer Wizard. (Windows Update, otherwise works fine. But not in the Add Printer Wizard.)

  Find a workaround to add the printer, which mostly does not work what I have read, would be only to solve the secondary problem of the addition of this printer. Except, it would not solve the main problem which is Windows Update *broken* in the Add Printer Wizard.

  Details:

  I have been setting up three new PC running Windows 7 Pro 64-bit. I had to add an old LaserJet 5if connected to a former print server. I created the IP Standard port, then clicked on the "Windows Update" button to update the list of printers. It worked on the first perfectly, as it has in the past with other computers to this place. Then I started to work on the other two at the same time. I'm lazy and started to perform several tasks such as installation of MS Office, Security Essentials (less than 10 units at this office, BTW), etc. while the Add Printer Wizard was updating the list of devices. One of these things, I can't remember which, required a reboot.

  And that is where I am certain that things broke. Restart has occurred while the two computers are in the middle of the list of loading from Windows Update System. I not interrupted the first PC. But the other two were interrupted and now they can't get a current list of Windows Update.

  I tried the FixIt tool at http://support.microsoft.com/kb/971058 . He says he detects a problem and claims to have fixed. Except, it isn't - little matter how many times I run.

  Ideally, the FixIt tool above must be updated or a new tool must be created by Microsoft to resolve this particular problem. Type of the error in any search engine, and you will see this question from several years back. It's happens often enough to justify the creation of Microsoft or update a FixIt tool.

  Any thoughts would be helpful.

  I have exactly and that no ONE reads what you say or what other people say everywhere. Only the upgrade Assistant printer does not... The update of the Printer Wizard do not work. Windows Update works fine.

  Ronday,
  You are right that if few people read what they respond to these forums. That's the kind of non-response, I found everywhere on the Internet about this issue. (The value of the community is sometimes over-rated, if you ask me). Apparently, using characters fat is not enough to focus on the fact that the issue is not with the printer compatibility since, as I said clearly A) this printer has installed fine several times in the past with the same OS and in the same office and B) that I clearly THE issue is that updated the list of devices , in the Printer Wizard, *Do NOT*!  
  However, I came across a suggestion on another site. I haven't had the chance to try it at the location of this particular customer - I'll do it later this month. Here is the link to the suggestion for you to try as well. Scroll to the end to ignore any non-response:
  http://www.techsupportforum.com/forums/F217/Windows-Update-not-updating-632025.html
  'Michel' made the following suggestion:
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Hi, most likely caused by one installation failed (not the Wizard), you need to do a bit of detective work, lets first try the easy solution: -.

  1. go to start, run and type regedit.

  2. go to the registry editor for

  HKLM\software\microsoft\windows\current version\installer\inprogress.

  3. click the inprogress key and note the name of the file contained on the

  right to databasepath (must be .msi extension).

  4 rename inprogress oldinprogress.

  5. close the registry editor.

  6. open my computer.

  7. navigate to C:\Windows\Installer (Installer file is hidden by)

  par_defaut, views folder check "show files and folders" also uncheck "Hide protected system files", do not forget to cancel it when you're done)) and rename the file noted in step 3.

  8 restart the computer and try the installation again.
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  If it works, then Michel deserves all the accessories. At least he or she tries to solve the real problem.

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• Spore origans. But they could not get the disc to download

  Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download

  Windows 7 Edition home premium

  Hello

  EA Spore games are you referring?

  If you are referring to the games EA Spore, I suggest you check the link for support:

  https://help.EA.com/en/spore?sso_redirect=1

• •EPMCSS-05261: could not get the information of the Aboriginal group.

  Hello

  Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

  I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

  «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

  Please could you let me know why we get this error message and no impact on the safety of the user.

  Thank you

  Michel K

  Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

  See you soon

  John

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• How can I get the list of data stores in a cluster data store?

  How can I get the list of data stores in a cluster data store? I mean the command line option.

  Hello

  by command line, you mean PowerCLI?

  If so, you can display data with this warehouses:

  Get-DatastoreCluster-name DSClustername | Get-Datastore

  Tim

  Edit: Moved the thread to the PowerCLI community

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.