Could not import photos

Similar Questions

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Cannot import songs in Windows Movie Maker, we get an error "could not import.

  Original title: wrong to import the music after hard drive now

  I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem.  I had to put in a new hard drive on my computer and now I cannot import new songs.  Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import.  Any ideas what I am doing wrong?

  Hi SHennessey,

  (1) what is the complete error message you receive?

  (2) what is the format of the file?

  Method 1: For files that can be imported into Windows Movie Maker, see the link below.

  Can what types of files I import?

  Method 2: To check your video filter settings, follow the steps mentioned below

  (a) in Windows Movie Maker go to the Tools menu

  (b) click on Optionsand then click the compatibility tab

  Now, check if the problem persists

  See the link below

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

• Could not import title animation After effects Bridge

  In Adobe Bridge, I click on an animation effect I like, and there's a window saying to burst: after effects error: could not import the random word shuffle in.ffx: unsupported file type or extension (0::1)

  If anyone is familiar on how to solve the problem, it would be very useful!

  Geneviève

  We need the details of the version and the operating system. If you use 13.8 - do you have installed the update on 13.8.1?

  After Effects 2015.3 CC (13.8.1) corrections update is now available. Creative blog Cloud by Adobe

• Could not import raw NEF images in items 10

  Can someone help me please? I have already installed an update of the plugin and restarted my computer.

  I have a Nikon D 750, which had to be supported with the latest plugin download.

  Could not import raw NEF images in items 10

  Melissa,

  I did some googling, and it seems that your D750 needs 8.7 ACR (Adobe Camera Raw version 8.7).  My camera needs ACR 8.3, but apparently 11 elements does not support this update. I have a feeling that your 10 PES is the same (no support ACR 8.7) for your camera.

  So, we can:

  (1) use the supplied software to Nikon for RAW files, convert to jpeg, and then open in PSE,

  (2) download: free Adobe, something called a converter DNG (?) that creates a DNG file to open to post-secondary studies, or

  (3) buy a newer version of elements, where the version supported with ACR IS compatible with your camera

  I'm not sure 100% accuracy of this info, but so far, that's what I found. Personally, I do not have these options.  I want to be able to work in PSE raw, but having to spend ANOTHER $100 or so just for this feature seems wrong.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import any type of audio file in my project in AECS5 files

  I am trying to add sound effects to an animation of titles for the first time. When I tried to import a .wav file, I got this error:

  after effects error. Could not import the file (filename.wav) not taken supported filetype or extension

  I have converted the file to .mp3. Still did not work. I converted the file .aiff, wma and nothing worked.

  What is the problem? Better to simply animate in AE and sound effects of entry into first?

  Help, please!

  Z

  > Why is it better to have the project files on an external drive?

  It is best to have your operating system and the applications running a disc, your source media read on the other, and written to another export your files. In this way, the hard drive doesn't have to jump around to read and write from several different locations at the same time essentially.

  There are many tips to improve performance here, including a response to your question about proxies.

  > Can you put the link where I can dl the AE 10.0.1 update

  Choose Help > updates. You should do quite often. Here is a page with the details of the recent updates.

  Regarding your first question: you can't import audio files? This type of video files that you have imported successfully?

• Could not import raw Nikon photos... what to do?

  I got the message "the following files were imported not because they could not be read."  I am able to see the nice preview images (raw format).

  I noticed someone suggested to change the import location.  I am "no techno" but I changed import automatic and also tried another location of file as well but got the same message.

  Really bummed.  Any help would be appreciated.

  Claudia

  I don't know what makes the difference... but with the new battery, it worked very well this morning.  Thank you for your help.

• Photos of the iPhone would not import Photos on Macbook

  I went to download my photos from my iphone to my macbook and I continue to make 'unreadable file' and ' database error: could not persist version. I download my photos several times in the past and a few weeks ago, I have download some pictures before I updated my mac to the latest version of the software. No idea how to fix this error? I am able to put the photos on my computer very well and in a snippet view, but will not import into mac photos. I even tried to import other images (not my iphone) and nothing will not import pictures for mac.

  As a test Pictures of launch with down option and create a new test library.  Import photos and a test to see if the same problem persists. T it?  If he doesn't want to say that your current library is damaged.

  So, try to repair the library according to the instructions in this document from Apple: Repair Your Library.

  Warning: If you use iCloud photo library with Photos, this operation will lead to Photos to upload all your pictures again (of difficulty missing or incorrect thumbnails in photo - Apple Support).

  

• Impossible to import / not import photos

  Hi, apologies if this has already been answered. I did a quick search and could not find my answer.

  Everything worked fine in LR 4, but the upgrade to 5.3 LR and using the Mavericks I was able to import the photos once. After tinkering for a week and frustrated, I updated to LR 5.4 and still have the same question. I have uninstalled/reinstalled without success.

  My setup is LR 5.4, with the Mavericks and try to import images directly from my Lumix LX7 (connected via USB) card.

  The questions are:

  -When I click on importing, thumbnails for the first dozen or so images fill. These are the same miniatures that are initially visible in the window when I go to the Import module. But then, when I scroll through all other thumnails are white. Not "preview of the Image is not available." All grey squares with the file name. I have to click around on these squares and load different images to see where I want to start my import.

  -When I select a range of close to 50 images/videos and hit import files, it does not work. The screen changes to a gray screen that says "Import files" or something like that. But the progress bar in the top left corner does not move. No thumbnails not developed in active import window. Essentially, nothing happens. After 20 minutes, I click the button cancel on the progress bar and it confirms that no photos have been imported.

  The images are set to be extracted from card LX7 and saveed on an external drive, reinforcement of the Standard previews and intelligent previews in the catalog by using the import settings.

  -Just try to import five stills does not work either. Same questions.

  Any import this dilemma is further complicated because the LX7 card has about 500 images on it. When I did imports previously in LR 4, I would choose to import only new images. However, it does not recognize the previous pictures I imported, despite them with LR 5 in my library with the same file name and my import preference being to ignore duplicates. Instead, when I installed LR 5 first I was able to do an import and had to eliminate duplicates from my library by using a search for '-2' filter in file names. Now, I can't even LR 5 to import anything.

  The only time wherever I was never successful import of images with LR 5, was the first time that I used it. The thumbnails in the import window and I scrolled down as they populated, keep pace wth my Macbook Pro build each row of thumbnails. Then, when I saw the photos for all images on my LX7 card, I hit Import and it worked fine with the same import settings. Subsequently, I can't see the pictures for the first 10 images only and based on accurate results import into LR 5 stalled.

  Does anyone have any advice on how I can get import working again?

  *********************************************************

  I HAVE THE SAME PROBLEM, BUT FOUND A WORKAROUND THAT CAN HELP SOMEONE

  I have a 810 Nikon that captures video and files NAVE and a GOPRO which also captures the JPG and MP4 files.  The described problem ALWAYS happens when I still have pictures and video on the same card.  If I only take still pictures and then there is no problem.  Using a card reader the DIFFERENCE of NO FACT.   Put the files on another led the first FACT NO DIFFERENCE.

  I tried to separate the JPG files and MP4 files in different folders, but this did not help.  Here take a tip from one of the messages that MP4 files could still be connected somehow to the catalog, I deleted the folder with MP4 files, ejected from the card reader that have the SD card with the MP4 files and closed Lightroom (I checked the card Force Quit to be sure that Lightroom did no more work).  Now, I got the JPG files on an external drive of 3 USB, not MP4 files, none of the THM sidecar files.  I restarted Lightroom, held my breath, and the problem was gone.

  I hope this helps.  Why this help I have no idea.

  Bob R.

• Could not import all of the files in Lightroom

  I've been using Lightroom since Beta 3, but never meet this problem before. He apparently don't ingest photos. (I usually ingest RAW and convert to .dng but it won't let me even copy without converting them to .dng.)

  I tried two readers of different cards, two different cards, with pictures (one CFDC, a SDHC), most copied photos of CF card on my desk and tried to eat there. I also have an auto import to my desktop folder (to put in the files scanned my scanner) will not import. :-( It's used to work like a charm.

  I use LR v3.4.1 on a Mac Pro with 14 GB of RAM. I ran Apple disk First Aid, as well as the latest version of Diskwarrior on this hard drive: no problems found.

  The photos can be viewed on both cameras, they came. I can see them in Lightroom before I attempt ingestion.

  The error message that appears when I click on to ingest is: 'some import operations was made' and inside this window: 'the following files were not imported because they could not be read. (466),"then it shows the folder structure. All of the photos I am trying to import are RAW files, but those sent to my folder to auto import on the desktop of my scanner was RAW, tiff and jpeg. None would have the auto import. :-(

  Any solution for me?

  Only, I have solved my problem.  For reasons that I don't understand, I didn't write permissions to the folder where to put my LR library.

  To solve this (Mac)-, I selected the folder that is located at the top of my directory structure of library (in fact - at the top of the directory tree) and made a command-i.

  From there on, I opened the "sharing & permissions" section and made sure that I have and reading and writing.  Then, I selected "apply to the elements included...". "in the menu of gear below and now, everything is good.

  I hope this helps others who run on this issue.

  Steve

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Computer will not import photos

  Computer will not import pictures either from camera or SD reader - there are 1,000 images this size would be too heavy for my laptop? I am running Windows Vista Home Premium 2 GB. I click on Photo Gallery - click on file - click the Pictures dialog box - then import appears - no new images on the device.  Any ideas?

  Hi silverfox16,

  1. were you able to import photos before without any problem?

  This error message occurs when you try to transfer the same pictures again.

  You can try to cut and paste the images using Windows Explorer and check.

  Alternatively, you can try to delete or rename the database file that checks the duplicates.

  Navigate to the location next and Pictures.pd4 and rename it to Pictures.pd4.old or remove the file and check.

  C:\Users\[username]\AppData\Local\Microsoft\Windows Photo Gallery\Pictures.pd4 (or sometimes.pd5) and rename

  For more information, see the links:

  Select the pictures and videos are displayed in Windows Photo Gallery

  http://Windows.Microsoft.com/en-us/Windows-Vista/choose-which-pictures-and-videos-are-displayed-in-Windows-Photo-Gallery

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Hope this information is useful.

• Could not import a subscriber unit

  Unit 4.05, Exchange 2000 offbox. I'm trying to re - add a user. When I add the Subscriber I get an unrecognized error 0 x 80010105 occurred: the server threw an exception. The new Subscriber has not been addded.

  The event history is like that. We had a 4.0 Server unit. This subscriber was part of this area of the unit. The Subscriber has left the company and we have removed the user of the unit and disabled the account. In the meantime, the unit was upgraded to 4.05 under a new server name. Active Directory has not changed. Last week the Subscriber a re-joined the company. If we add the disabled account previously, we get the above message.

  I ran Diagnostics of directory as the unit AD DIR SVC account against the capricious Subscriber. All read/write tests came back with a YES.

  I tried to use the bulk import Subscriber and received this error message: started on November 20, 2005 at 09:27:10.

  (Error)

  Synchronization failed: KVonStriver. Error: 0 x 80010105

  Objects that failed to synchronize: 1.

  Completed November 20, 2005 at 09:27:12.

  I then tried the Global subscriber Manager and received this error message in the SQLSYNC.txt:

  Sun Nov 20 09:55:45.649 GCFindDirObject enter \ConnectorClientBase.cpp (line 301)

  Sun Nov 20 09:55:46.290 GC could not find of Rdn (KVonStriver). \ConnectorClientBase.cpp (line 376)

  Sun Nov 20 09:55:46.962 object found in GC by Alias/MailNickname (KVonStriver). \ConnectorClientBase.cpp (line 399)

  Sun Nov 20 09:55:47.8 leave GCFindDirObject \ConnectorClientBase.cpp (line 439)

  Sun Nov 20 09:55:47.55 object found in \ConnectorClientBase.cpp area XXXXX.com (line 238)

  Sun Nov 20 09:55:47.87 could not find by DirectoryId. \ConnectorClientBase.cpp 0 x 80010105 (line 258)

  Sun Nov 20 09:55:47.133 could not find of Rdn (KVonStriver). \ConnectorClientBase.cpp 0 x 80010105 (line 273)

  Sun Nov 20 09:55:47.180 leave FindDirObject \ConnectorClientBase.cpp (line 285)

  Sun Nov 20 09:55:47.212 no voice no name given for object. \DbSync.cpp (line 1877)

  Sun Nov 20 09:55:47.258 CreateDirObject enter \ConnectorClientBase.cpp (line 454)

  Sun Nov 20 09:55:47.305 monitor Create failed 0 x 80010105 \ConnectorClientBase.cpp (line 466)

  Sun Nov 20 09:55:47.352 leave CreateDirObject \ConnectorClientBase.cpp (line 473)

  Sun Nov 20 09:55:47.399 cannot create the Mailuser KVonStriver in \DbSync.cpp store 0 x 80010105 (line 886)

  Sun Nov 20 09:55:47.430 Exiting SyncSubscribers, return \DbSync.cpp 0 x 80010105 (line 950)

  Sun Nov 20 09:55:47.477 could not synchronize \DbSync.cpp subscribers 0 x 80010105 (line 347)

  I restarted the permissions wizard to verify that those are correct. I went to the user in AD and makes sure that security rights had inherit permissions and I gave the UnityDirSVC a full control to the account.

  I compared with other well-known accounts work, permissions and others, and they are identical.

  The name of the server before the upgrade was ACC-unit. The new name is CAC-unity1. Could there be something in the properties in Active directory that refers to this? Something to change the account using ADSI Edit?

  Successfully, I can send and receive e-mail messages to this mailbox using Outlook.

  Try to restart the AvDSAD service on the unit. Make sure that the UnityDirSVC account is used to start the services AvDsAd and AvDsGlobalCatalog.