Five options do not start

Similar Questions

• Power and system restore options will not start

  Hello

  Yesterday I used system restore to restore my computer from a restore point when I had problems burning files to disk. The restoration seems to go smoothly. However, now I can't access power from the taskbar options (I use a laptop) or the control panel. When I click the icon, nothing happens. So, I tried to open the system to always restore in mind to find a different restore point. However, when I right click on "Computer" in the start menu and click on 'Properties', the same thing happens: nothing. It's the same, click "Recovery" in the control panel.
  Therefore, I entered "rstrui.exe" from the command prompt and finally got to come system restore window. However, there are an error message that says:
  "System restore is not seem to work correctly on this system." An element of Volume Shadow Copy Service has encountered an unexpected error. Check the log of events applications for more information. (0 x 80042302)
  So I typed "Services.msc" in the start menu and clicked on it, but yet again, nothing happens.
  Right now I'm running a scan with Malwarebytes malware, after which I intend to try to do a restore of the system in safe mode, but I fear that it won't work because I already tried to start safe mode power options and it did not work (that was before I realized the system restore was not functional).
  Can someone please? Thank you.

  Edit: both pis. I was able to fix the problem with sfc/scannow from an elevated command prompt. There were files corrupt system that have been properly repaired. Now the system restore works, but it is no longer necessary.

  Hello

  I'm glad to know that you have solved the problem of system restore. I really appreciate your efforts to address this problem.

  Able to get to power options are you working now?

  If you are still having the problem with power options, I suggest the following methods and check if it helps to solve the problem.

  Method 1: on troubleshooting in Windows 7 power management http://support.Microsoft.com/kb/980869

  Method 2: when you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel http://support.Microsoft.com/kb/935799

  Registry warning: TThis section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft: http://support.microsoft.com/kb/322756/ Knowledge Base

  Method 3: power options do not work correctly in Windows 7 or in Windows Server 2008 R2 when you use Group Policy to configure the power management in a field to download and install the Microsoft Fixit mentioned in the article. http://support.Microsoft.com/kb/2514376

  We can also refer to the following article and follow the steps there.

  Windows 7 is not going to sleep: http://support.Microsoft.com/kb/976877  

• Home Page layout option does not work. Home page comes down to Modzilla Firefox Start Page.

  Homepage layout option does not work after saving a new or different homepage on Firefox 19.0. When you open a new page (not tab) it always comes back to the default "Modzilla Firefox Start Page" value anything.

  How to fix preferences that will not save help?

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Acer asl3600 will not start only get option is F12 and no data on the recovery drive.

  Hi guys have Acer asl3600 will not start only option get is F12 and no data on the recovery as disc was in vista family 32-bit premium version devastated as being disabled and need for my community work & charity, thought best option would be a recovery disk.

  Concerning

  Dennis

  Hello

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Acer definiterly only reinstall to factory settings, new condition.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• I wish I had my day starts at 08:30, 12: 00 no, but that change in the options does not seem to affect the appearance of my calendar, how can I change this?

  I just started to use Windows Calendar.  I wish I had my day starts at 08:30, 12: 00 no, but that change in 'options' does not seem to affect the appearance of my calendar, how can I change this?

  Hello
   
   
  Exactly why you want to change the start time of day?
   
  If the part highlighted changes in the calendar view, which means that the option is selected.
   
  I suggest you to see the link and check if this is useful:
   
  Customize windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar
   
  I hope this helps.

• Will not start unless I have use EDIT (F10) BOOT OPTIONS to the start screen

  n order to get my laptop running I have to press F10 at startup, which brings me to a screen that says:

  CHANGE STARTUP OPTIONS
  Edit windows boot options for: windows 7
  path: \windows\system32\winload.exe
  score: 3
  hard drive: 350f350f
  [/ NOEXECUTE = /MININT OPTION]
  ]

  To start, I need to erase the text:
  "/ NOEXECUTE = /MININT OPTION.

  After that, I can start.

  My problem with the trunk is the C:\Windows\system32\drivers\Classpnp.sys file. I know because I tried safe mode, but it hung to this file.
  I also tried system restore and Startup Repair with no luck.
  I tried to use cmd to rename the file in Classpnp.old, but he said he could not find the specified file, when this is clearly where I can see it when I go to the folder (once I start with the hack at the above address startup options)
  I checked in the environmental settings, but the problem isn't here. I also tried sfc/scannow in cmd, but the test came back without error.

  Help, please!

  Try this

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Creative cloud does not start starting system even when the option to do so.

  Creative cloud does not start starting system even when the option to do so.

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Dell XPS One 2710 does not start - should I all reasonable options?

  A few weeks ago, my 18 - month, Dell XPS One 2710 has started to act up.  Still not start correctly.

  Ran the Dell diagnostics on their Web site.  Everything was fine - no detected hardware problem.

  Yesterday, the computer completely stopped working.  It would be start, after a sweep of drive long, finally on the desktop, but can hang after 10 minutes.  I'm on Windows 8 (not 8.1).

  Today, I thought I would do a system restore to a point a month ago.   But today I can not get a startup complete, impossible to get on the desktop.  Therefore, can't do a system restore.  Instead, I see this screen.

  I have the options to continue?   I don't have a recovery disk.

  

  You can install 8.1 on top of what you have by a 16 GB or more usb flash drive as a bootable recovery media.

  If it does not recognize the key to your Bios, you can use a generic key for install but not activate.

  All the pre installed 8.x are 64-bit so make sure you download the correct version.

  XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Pro)

  Windows 8.1 334NH-RXG76-64THK-C7CKG-D3VPT (home)

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• C75-A-11j satellite crashed and will not start

  I went to Toshiba in December 2013.
  Never had serious trouble with the other H.P. during all these years, but now five months Toshiba and my laptop Satellite C75 completely crasched.

  I tried to update the system, but it did not work.
  Fortunately, I saved most of my data in the cloud that I did a reset full factury.

  In this process the laptop has a blue screen.
  He said that there was a problem.
  It restarted, and now I can't do anything. Immediately after the start, it gives a blue screen all the time.

  I can't do an another factury reset because I can't select this option. I do not have the productkey, and I don't have a windows DVD, since the feature reset-factury-comes aboard with the laptop.

  Everyone's advice?

  > It restarts and now I can't do anything. Immediately after the start, it gives a blue screen all the time.

  What exactly happens after you have pressed the power button?
  Are you able to access the BIOS by pressing F2?
  You can start the Boot Menu by pressing the F12 key?

  Try it and post comments.
  Where both options are not possible, and don t give no results, I recommend you contact the maintainer authorized Toshiba in your country in order to get the unit fixed.
  The standard of guarantee must be valid and the unit will be attached to a year free of charge.

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• HP Pavilion e020us 17: 10 Windows will not start

  I worked on a portable computer that no longer starts.   If I boot from the hard disk in the recovery partition I can't start there on the Windows partition.  I have a choice of Windows 10 of Volume 4, Windows 10 of Volume 4 (Yes it is listed twice) and the Windows recovery environment.  Picking either 10 Windows starts the computer in a reboot loop that can only be stopped by pressing ESC and returning to the recovery environment.

  Boot from CD and try to repair the operating system does nothing - he says that he cannot repair the computer and goes to the recovery environment.

  Auto repair, recovery Image system and System Restore does not work.

  Command prompt shows everything on the C drive is still in place.  CHKDSK shows that all is well with the drive.  But I can't boot from the drive.

  I have not tried to reset the computer only because I'm going to do as a last resort.

  Any suggestions on what to do next?

  Hi @tedly2,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer gets stuck in a perpetual loop and does not start. I'll be happy to help you with this.

  A remarkable work was done by train to solve the problem. Hats off to you on this point. I am really impressed with your troubleshooting skills and levels of technical expertise, and it's always a privilege to work with a client of enthusiasts like you.

  First, isolate the problem to be hardware or software related by running diagnostics. Please try a hard reset first. Steps to do:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Diagnostics of material:

  • The main menu of hardware for the HP (UEFI) PC Diagnostics is displayed.
  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press the F2 key repeatedly, once every second about.

  Link to run the hardware diagnostics: http://support.hp.com/in-en/document/c03467259

  There is a video partner who shows how it's done. "Please make the step" test using material for the HP (UEFI) PC Diagnostics "from this link. Run full Diagnostics.

  Where it is established that the hardware is fully functional, please try to recover a system from this link: http://support.hp.com/in-en/document/c04758961#AbT4 , choose the right option that best describes your situation. If nothing helps, please order a set of recovery here online media: http://hp.com/drivers

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as "'Accept as Solution". " If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click the ' Thumbs Up ' to give me a Kudos. I really hope that the problem is solved without hassle and things work fine.

  Take care and have a fabulous week ahead.

• CS LR6 of CS LR5 update does not start

  Hi, I have just install CS LR6 by buying the upgrade. Everything seems fine with the process (from download to install), but LR6 does not start when I click on it.

  I've only had this open window: '

  

  Translated, that means, there is a problem with my setup (I don't think while I used LR fair, 5 five minutes ago no problem) and that I should try to uninstall and reinstall... I can't uninstall uninstall link is too broken.

  Any help would be welcome.

  Stone

  OK got it working, but I had to delete all the files Adobe virtually any Mac application, kept only some newspapers (I thought it can't hurt and I'm tired of this mess) and then do a clean installation/configuration in this order:

  -Install the creative cloud with the CreativeCloudInstaller.dmg downloaded from Adobe

  -Disconnect of the CC of the preferences panel and leave CC (after a while of waiting for the "Exit" option to be available on the menu, don't know why).

  -Install Ligthroom 6 LS11 my purchase of upgrade .dmg Installer and download.

  -Launch LR and follow this way to serialized: using Adobe Photoshop Lightroom | Serialize Lightroom trial to activate like Lightroom 6 CC

  Now, I have to install PS CS6 back and all my plugins and settings.

  If you need to do to, be sure to have backups secure (several).

  This solution is really the only one that worked for me, because I think I've tried almost everything I see here (reconnection of the CC, restart, reinstall, delete files, give rights to libraries and so on).

  For the moment, everything is fine (I have no time to seek more internal LR6 bugs) and I got the standalone version works even without connection internet (I tried).