Trying to update my acer aspire driver vga m5 - 583p?

Similar Questions

• I can update my acer aspire 5742G ATI 5470 graphics card

  Can I update my laptop Graphic card

  News of the laptop:

  Acer Aspire 5742G
  Intel Core i3
  15.6 HD Led LCD
  ATI Mobility Radeon HD 5470 graphics card
  4GB Ram DDR3 memory
  HARD DRIVE 320 GB
  DVD-Super Multi DL drive
  Acer Nplify 802.11b/g/n
  6 - cell Li-battery

  Quote your version of Windows.

  Questions like this are best asked of the manufacturer of the laptop.  If the video card is integrated into the motherboard, you will probably not be able to replace it, but the manufacturer must have this information.

• I need Rom update for Acer Aspire 5100 (for Windows7 64 bit!)

  Download available. But downloaded version is 32-bit only other has bad name of Rom, system does not accept it!

  (I think this got posted in the wrong place... Sorry don't know how to move to laptops)

  Hello davidstipek,

  First, I advise you strongly not to Flash on Windows. You will create other problems.

• Aspire drivers VGA Intel V7 - 482PG Error Message

  I raised suspicion that the intel VGA drivers installed cause me a BSOD (which happens when I alt - tab of a video game using the NVIDIA VGA drivers for my deskptop).

  I'm trying to update the drivers for Intel VGA found here http://us.acer.com/ac/en/US/content/drivers, but Im getting the following error message:

  "The driver being installed is not validated for this computer."

  When you try to download the drivers directly on the site to intel, I still get the same error message.

  What I'm doing wrong :/?

  I solved my problem of manually updating the drivers using "have disk".

• downgrade acer aspire 571 - v3 for windows 7

  Hello

  I am trying to downgrade an acer aspire v3 - 571 of windows 7 to windows 8? Anyone know how I can change the boot order to boot from a dvd or usb hd rather than the hard drive?

  See you soon

  Nice day

  1. you press "F2" when you switch on the device.

  2. make sure that you change the secure mode of UEFI in legacy.

  3 disable secure boot.

  4. go to start, press "F6" to take the optical drive to option 1.

  Kind regards

  FReeZA

• Acer Aspire on reformatting receives an error "not customize Windows re to recovery utility.

  I tried to reformat my Acer Aspire 5560. It goes through the system, the 1, 2, 3 and 4 recovery disk disk, then click Disk language toward the end, he receives a 'Fail to Customize Windows re for error recovery utility".

  I've seen this error when people tried to create a partition for recovery for the future, but in this case I need to return my computer working again!

  In the meantime, he will not restart and says BOOTMGR is missing Press Ctrl + Alt + Delete to restart and goes right in a loop. Help, please...

  Download Ubunto and burn the iso, boot from the cd and choose try Ubuntu, install, since a live session start the Editor of Gparted Partition system-> Administration, click on partition and choose delete, choose new and create the new partition, format partition.

• Acer Aspire 5000 XP to Windows 7, cannot detect the audio drivers

  original title: Acer Aspire 5000 XP to Windows 7

  I recently updated my Acer Aspire in XP to Windows 7 5000. The process went well, but now he says it detects all audio devices. I checked the control panel and go to the sound section and it says that no devices are installed. Also, I am having some problems with graphics (a few black lines appear every now and then). I'd appreciate your help with this. Thank you!

  There are no Windows 7 drivers for your model, something that you should have checked before the upgrade.

  There are Vista drivers on the Acer site which may operate, but don't hold your breath...

  http://support.Acer-euro.com/drivers/notebook/as_5000.html

  If they are not, return your machine back to XP, if you want to keep all the features...

• Acer Live Updater can not install the VGA Driver.

  I have an Aspire V5-571, Live Updater indicates a new update for Driver VGA Intel is ready to be installed. However, after you click install, and then 'Finish' button, there is a red icon saying that a system restart is necessary. I tried to restart my computer several times and get the same error message. How to install this? Help, please! Thank you.

  Yes and it's odd live update Acer offers a VGA update for your laptop, because it is not on the list of Acer:

  http://www.Acer.com/AC/en/us/content/Windows10-eligible-models

  can you please check the installed version?

  key of the Windows logo + x

  Device Manager

  Click on graphics card

  Double-click Intel VGA

  Click the tab drivers

  the version of the drivers

• Acer Aspire 8943 G Touchpad does not, the updated driver is installed

  I instaled and uninstalled it a dozen times, used system restore and cannot get the touchpad to work Acer Aspire 8943 G, please can any one help?

  Something strange happened. It would not work no matter what I tried. I was watching a movie on KODI formerly XBMC. I accidentally hit the keyboard and the mouse moved. I pressed the video button and it lit up. The only thing I can find is that it took several hours for updated driver to work, or the video triggered the Touchpad.

  I uninstalled and deleted all instances of the driver including the reserved system created by a MS Tech backup when my Windows Ultimate has become corrupt. Initially, it was Win-7 Edition Home Premium and when it would not install IE10 when MS gave me a free upgrade to Ultimate.Even then it took a week to finally get installed IE10 because the computer did not have Service Pack 1. Congratulations to MS Techs, they called me several times and worked on my computer. Him spoke excellent English and are based in India. Computer laptop is out of warranty and Acer said enough so be it, I have to pay. MS did not charge me a dime.

• Acer Aspire 5560 Dolby Advanced Audio driver issues after updating to Windows 10

  Hello

  I have an Acer Aspire 5560. I've updated to Windows 10 and now I am getting up the following message is displayed at startup.

  The current Dolby audio driver is 7.2.8000.17 and the software application expects that the version of the driver 7.2.700.7. Please install a valid combination of pilot application and software.

  Can any help with a fix for this?

  Try this drivers too:

  http://station-drivers.com/index.php/downloads/func-startdown/1591/

  100% trusted Web site.

  Double click on the exe and then the extracted folder, find setup.exe and run it.

• Updates to driver for Acer Aspire 5750Z help

  I did successfully a full system restore, which worked very well. Bit, I'm sure that some, if not Hello, my drivers should be updated.

  Where can I get the driver for Acer Aspire 5750Z updates.

  I have never done anything like this before advice as to how I do it would be appreciated if someone could give an old man.

  Thank you

  G

  http://us.Acer.com/AC/en/us/content/drivers/3681;-; Longs % 205750Z

  you will find the latest available for your model, just click on the link to download the drivers you need to update, and then unzip the file (just right click and choose Extract), then find the driver folder and double-click install.exe or setup.exe, then follow the instructions on the screen.

• How can I tell which driver or other updates to use? I can't find a list of ACER Aspire components.

  I want to make sure that all my drivers and other things are up to date. However, I can't find a list of components that need drivers etc on my Acer Aspire XC-603. The list of drivers on the download page are about 10-12 and none seem to have names I recognize. I want ACER to download automatically the drivers and software upgrades, so I don't have to understand all the time. Thank you.

  lse872,

  Acer drivers on its support page positions. If you are unsure what drivers to update with, there is a link above the drivers listed that said: need to know the hardware on your system to choose the correct drivers? If you click on that it will do a scan of your device and you say what elements of material you have so that download you the appropriate drivers.

• Video driver problem Acer Aspire 5334

  Acer Aspire 5443 of my child worked well for years, and then she "cleaned things" or run Windows update & the problems started with the video.  I could not solve Windows 7 Home Premium 64 bit crashing.  The best I after factory default charging system, basic VGA.  As soon as the updates are detected and applied for graphics cards, it flashes to black screen / distorted when Windows opens, then crashes, usually with a message that the adapter detected a problem & recovered - all frozen.  Shows Device Manager two instances of the Mobile Intel(r) 45 Express Chipset Family MS Corp - WDDM 1.1.

  I've updated the bios BIOS v1.06 & vga to v1800, ran Windows Update, try to find/load drivers Intel GMA 4500 m, install the updates to intel chipset, all to the same effect - it crashes.  I delete one instance of the device, same thing.  The only thing that I can do so far is to disable graphics cards.  The latest driver from Acer do not fix it.  What is happening with this?

  Have you tried to install this driver (Mobile Intel 4 Series Express Chipset Family):

  Intel GMA driver

• Acer Aspire HD E1 graphics driver - 571-4000

  Hello, I tried to update the HD Graphics 4000 driver in my Acer Aspire E1-571 and I'm able to get the latest version of the driver works very well from the Acer support page. However, this driver is almost 3 and a half years now or dates from 2012 with the fact that every time I encounter a problem with a modern game support always telling me to update my drivers. The latest driver from Intel page is perhaps not more than two months. I am aware that the driver must come from the OEM for him to be recognized, but decided to opt for a workaround see if I could update it in any case.

  I tried the advice from the support page from Intel to uninstall the driver from Acer and do a fresh reinstall with the latest Intel driver instead, but it does not work. It seems that it only allows for Installer try to install it but fails halfway through, as supposed is not at all tell me to go to my OEM. It seems that Acer genuneily uses the custome for its driver software and if the latest driver must be provided.

  I'm I missed something here, this is really the last version supplied by Acer and would it be possible for Acer to release a newer version. I also checked with people who use an HD Graphics 4000 and they do not seem to meet the same problems I did when using DX11. Which none use Acer laptops.

  My characteristics are i5 - 3210 M 2.5 GHz with Turbo boost of 3.1 GHz technology

  8 GB RAM DDR3

  Version number of Intel Graphics HD 4000 9.17.10.2867

  I finally found the solution, you had reason to propose a system reset but that only highlighted the real problem. It was a combination of issues, hive corrupted corrupted windows installer and interference from program files. I recommend to anyone who tries this correction to create a Windows easy transfer file and backup register and license keys.

  First of all, I tried to do a refresh of the system and then install the driver, even though I've updated first he failed and blue screened after the installation of the driver as he had not the necessary DirectX update. Which implies that updates has not really saved. I opened a restore point to back up the system and he projected blue perma then. The system repair tool is not actually grant me access to the restore point to try again. To work around this problem, I opened the disk part via the command prompt in the advanced and then forced Startup Repair tool permissions. To do this, I typed first 'Diskpart', then 'list volume', then select the disk D and C drive by their volume number. For my part D training was 0 and C disk 1, then withdraw their letters and assign again so that the primary drive is drive C (even if it does not change letters volume the end of it, it will always be you grants the permissions you need). This love so much "select volume 0", "Remove letter = d','select volume 1','Remove letter = c','select volume 1','affect letter = c',"select volume 0", " affect letter = d'. "" "" Then type 'exit' and 'rstrui.exe'. Perform the restore from here point and you should be able to continue the restore point.

  With myself however, the restore point has been so severely altered it could not load up, worse yet, I was not able to make an another refresh or reset. I discovered that this was due to corrupt hive files, I renamed to solve this problem through the command-line as follows, ""C: ', 'cd %windir%\system32\config', "ren system system.001", "ren software software.001', 'exit'." This then allowed me to perform a system reset.

  The first thing I tried to do was last updated in the system and even once, it has failed, it is constantly necessary to restart and wouldn't install anything. After you perform a clean boot, I realized that it was interference program McAfee and after he could not afford to be disabled I uninstalled it completely (I might have updated to see if he would settle the matter, but at this point, I was losing patience). Procceded updates until the end of the first batch. After that, the update has been stuck in a loop of always trying to find updates but never finished. It was because corrupt windows files from the installer, to solve this problem, I restarted the machine to make sure that the update has been closed and I opened as an admin command prompt so I could rename them and force the system to make new files by typing the following. "net stop wuauserv", "net stop cryptsvc", "net stop bits. Then type "ren SoftwareDistribution.old C:\Windows\SoftwareDistribution", "ren C:\Windows\System32\catroot2 catroot2.old. Then type 'net start wuauserv', 'net start cryptsvc', 'net start bits' reactivate the update and then restart the computer. The update then worked fine until he hit Security Windows KB2756872 solve this I used a manual installation.

  Available to the Update for Windows 8 for x 64 systems (KB2756872) - Microsoft and then select Windows8-RT-KB2756872-x 64.msu (162.8 MB).

  After this all updates completed fine, I created my restore points (and a backup just in case restore point) and continued to install the driver manually. It worked the first time after having solved the problems. I use Windows easy transfer to restore all the files and after I re - install my programs, I'll be as good news.

• ACER ASPIRE 471 - E1: UPDATE THE BIOS CRASH

  HELLO, I NEED HELP ON THIS.

  I WAS updating THE BIOS ACER ASPIRE E1 - 471 VERSION 2.11 to 2.18 BUT GOT IN FAILURE, WITHOUT NORMAL MORE to IGNITE.

  WHEN UPDATING THE FILE ORIGINAL WITH THE HELP OF THE ACER SUPPORT WEB SITE, RESTART THE LAPTOP TO WINDOWS POWER ON A BACK PAGE AND DISPLAY IT ON THE SCREEN...

  UPTATING:

  TRUE BIOS VERSION: ZQS 2.11

  NEW VERSION OF BIOS: ZQS 2.18

  PROGRESS...: 0% AND SCOPE WITH A 100% SUCCESS

  AFTER THIS, THE LAPTOP REBOOT AGAIN AND POWER BLUE LED LIGHTS UP BUT NO SCREEN...

  AT THE START OF THE LAPTOP, HARD DRIVE MAKING NOISE OF POWER ON AND.

  NO SCREEN, THE COMPUTER PHONE IS FREEZE.

  ON THE BACK THE INFORMATION OF THIS LAPTOP, THE BOOK SAYS:

  Aspire E1-471-6683

  MODEL NO.: ZQT

  .....

  SNIDS: 31300078979

  So Original BIOS was ZQS but the model said ZQT?

  I have not found a repair for this model, so cannot move too much by myself.

  I found some instructions on the use of USB with the FCN + ESC + Power Buttom combo...

  The use of files with. FD extension inside the USB key.

  I tried 1 for the test and the thing happens as users said.

  Power Led flashes, USB Stick will blink for a few seconds, and then restart laptop.

  BUT STILL FREZZY.

  I think I use the wrog. FD file.

  ACER support website has none. This model in the FD file (or any other type of file, hit. EXE, a)

  You can with ACER Support me?

  Thanks, it is a client of the portable computer of mine, I'm kind of scared at the moment.

  OK, thanks for the reply.

  I got the sollution and will share with you now.

  [edited to conform to the guidelines]

  YOU WILL NEED TO FORMAT A USB STICK WITH FAT (16) PARTITION STYLE.

  -------

  NOW, THE SECRET OF. FD FILE

  YOU MUST PUT IN THE USB THIS FILE WITH THE EXTENSION. FD, BUT THE ACER DOWNLOAD SITE IS ENOUGH. EXE TO THE INSTALLATION, SO YOU GO ON ANOTHER COMPUTER (INCOMPATIBLE WITH ASPIRE E1 VERSION) AND RUN THE FILE...

  YOU RECEIVE AN ERROR MESSAGE, BUT NOT CLICK NOW ON ANY BUTTON.

  NOW, OPEN WINDOWS EXPLORER AND GO TO C:\USERS\(USER ACCOUNT)\AppData\Local\temp\7zS4F0C.tmp

  INSIDE THIS FOLDER, YOU CAN GET THE ST. FD FILE (PERHAPS ZQS.) FD)

  THAT COPY ON USB KEY AND CLOSE THE ERROR MESSAGE. (FOLDER WILL DISAPEAR AFTER THAT)

  WITH THE FILE INSIDE OF THE SECONDARY KEY, FOLLOW THE MANUAL INSTRUCTIONS.

  BASICALLY:

  Steps for the USB storage device BIOS recovery

  To create a crisis USB key, perform the following steps:
  1. format the USB storage drive using the Quick Format option.
  2. save the ROM file (filename: ZQS.fd) in the root directory of the USB storage device. Make sure that there are no other file BIOS stored in the same directory.
  3. plug the USB storage on USB device.
  4. press the button, then connect power cable.
  5. the power button flashes once.
  6. press the Power button to start the CRISIS of the system mode.
  7. when the CRISIS is over, the system auto restarts with a possible BIOS.

  AFTER THAT

  8. update the latest BIOS version for this machine of normal BIOS flashing process.

  YOU MAY HAVE ANOTHER PROBLEM LIKE ME, AFTER RECOVERING FROM CRISIS, BIOS NOW SEE THE ANY HARD DISK, SO YOU MUST UPDATE THE BIOS AGAIN WITH THE HELP OF ANOTHER TOOL LIKE HIRENSBOOT HELP FIXITURE MINI_XP.

  BUT IT IS ANOTHER CONVERSATION.

  THANKS FELLOWS.