Could not view the logs in the Console of the AAS - AAS crashes

Similar Questions

• MMC could not create the snap-in when you run the Scheduler of tasks or event viewer

  Event Viewer and Task Scheduler are not running.

  Error returned is: mmc could not create the snap

  Someone knows how to solve this problem, I searched and tried everything I can find and it still doesn't work.

  can someone tell me the conditions required for the event viewer for work so I can check?

  I managed to solve this problem in this way on my Windows Server 2008 SP2:

  1. navigate to the following directory:

  For x 64:

  C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\CONFIG

  For x 86:

  C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG

  2 backup 'machine.config' file from somewhere, just in case before you continue.

  3 Rename the machine.config file to machine.config.old in the directory above.

  Fixed a problem!

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Launch KVM console: could not launch the application

  I have a UCS C220 M3S with MMIC 1.5 (4 d). When I try to launch the KVM Console, I get a popup with "unable to launch the application.

  Windows 7

  33.1 Firefox

  Update Java Version 8 25

  Exception:

  com.sun.deploy.net.FailedDownloadException: could not load the resource: https://10.85.162.187:443/software/avctNuova.jar
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Wrapped exception:

  javax.net.ssl.SSLHandshakeException: received fatal alert: handshake_failure
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.SSLSocketImpl.recvAlert (unknown Source)
  at sun.security.ssl.SSLSocketImpl.readRecord (unknown Source)
  at sun.security.ssl.SSLSocketImpl.performInitialHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  to sun.net. www.protocol.https.HttpsClient.afterConnect (unknown Source)
  to sun.net. www.protocol.https.AbstractDelegateHttpsURLConnection.connect (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream0 (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.access$200 (Unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.security.AccessController.doPrivileged (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream (unknown Source)
  to sun.net. www.protocol.https.HttpsURLConnectionImpl.getInputStream (unknown Source)
  at com.sun.deploy.net.HttpUtils.followRedirects (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doGetRequest (unknown Source)
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Downgrade of Java 7 u21 (delete other versions of Java installed) and let us know.

  http://www.Oracle.com/technetwork/Java/javase/downloads/Java-archive-Dow...

  -Kenny

• Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged.

  Several files have been created and they are on my desk. When I try and open the files I have Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged. What can I do?

  It seems to me that your system file associations are out of step and must be properly configured.

  First, you will need to know what to use to open these files. Then you can Google how to set the file associations for any operating system you have and go and put them in the correct application.

  As to why they are generated, not sure, but not something from Adobe.

• Union - generator of grid view layout query error could not create the checkerboard to correct view

  I get the error while I'm trying to run a simple union query below. The query uses simple areas. I use columns the same type of data in the same order in each of the areas and when I run the sql generated backend query, it returns the correct result. Only in obiee front end, it is not showing any result but giving the below error instead. I use version 11.1.1.6.8 Please help!

  The presentation view grid generator could not create the checkerboard to correct view. It lacked the logical column with the following ID: c6d9af7a1de3ca97a.

  Error details

  Error codes: WUSYDB5K

  Geographical area: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.

  handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads

  This is a bug, you must connect your environment to min 11.1.1.6.10 max 11.1.1.6.12/11.1.1.7.x

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• Cannot log on to Windows 7, the error message: could not update the BITMAP ' 6801´:24

  Original title: logon W7 error
   
  When I connect to my home edition W7 (genuine windows) and type my password it happens an error reading box:
  "Could not update the BITMAP"6801´:24"and when I click on enter 6801, 6802 changes all the way to 6812 once everything is back to normal.
  Ive made a clean boot it and I have no restore point system were everythings were very good...
  This somewhat bothers me so promptly!
  Have a nice weekend
  Jonas

  Hello

  Thanks for the update.

  We are pleased to hear that you solved the problem.

  If you have questions about Windows operating systems, help us on this forum. We are pleased to be of assistance.

• Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

  I see this error:

  WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

  pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

  TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

  You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

• MMC could not create the snap.

  Whenever I am trying to change some local security policies I get this message, "MMC could not create the snap" and I can't navigate any further. How can I fix?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you to check in the event viewer for error logs and let us know the error. Follow the steps mentioned in the article below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  For the snap to work properly on the system, you should have the .net framework is installed correctly on the system. Check in the installed updates, what version of the .net framework is installed on the system and whether it is installed correctly.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  I suggest you follow the steps mentioned in the article below.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/dbd9c44d-629C-4188-9d77-7a9a7e5c6244

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Could not load the webapp in deployment

  Hi guys,.
  I'm trying to deploy my adf application.but get this bug.any idea what I am doing wrong.

  [18: 30:38] cannot determine the platform target profile.  Using default

  [18: 30:38]-deployment began.  ----

  [18: 30:38] the target platform's (Weblogic 10.3).

  [18: 30:41] recovery of the existing application information

  [18: 30:41] analysis of the dependence running...

  [18: 30:41] building...

  [18: 30:49] deployment 2 profiles...

  [18: 30:49] wrote on the Web for C:\Users\Fusion\Desktop\demoApp - Copy6\ViewController\deploy\demoApp_Project1_webapp.war application Module

  [18: 30:51] wrote the Module Enterprise Application-C:\Users\Fusion\Desktop\demoApp - Copy6\deploy\demoApp_Project1_demoApp.ear

  [18: 30:52] Application deployment...

  [18: 31:06] [Deployer: 149191] Operation "deploy" on demand "demoApp_Project1_demoApp" boot on 'WLS_FORMS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_REPORTS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : [Deployer: 149145] failed to contact "WLS_REPORTS". Deployment is delayed until 'WLS_REPORTS' becomes available. ; nested exception is:

  java.rmi.UnknownHostException: could not discover the URL of administration for the server 'WLS_REPORTS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "AdminServer.

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_FORMS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet

  [18:31:15] check the server logs or the console of the server for more details.

  [18:31:15] weblogic.application.ModuleException: failed to load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] undeployment.

  [18:31:15] - incomplete deployment.

  [18:31:15] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  Thank you

  Raul

  User, please tell us your jdev version!

  It seems that you have not installed the adf runtime for your version on the server you are trying to deploy.

  Timo

• Could not load the webapp: ' / em'

  Hi, I'm looking to set up a development environment of forms 11g on my desk and I have a problem with Enterprise Manager... From the WLS console / deployments, I see em ' with a State of "down"; in the start window, I see the following error messages.  (I tried the advice in another post - ' delete all files under... domain... \servers\AdminServer\tmp' and restart, nothing done ").  Any help would be greatly appreciated. (Windows 7, 1.6.0_43, WLS 10.3.6, Fusion Middleware 11.1.2.1.0_64 JDK)

  < 18 September 2013 1:26:05 CEST > < error > < HTTP > < BEA-101371 > < there was a failure during the processing of annotations for application C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\AdminServer\tmp\_WL_user\em\hsz5x1\em.war. Please make sure that annotations are valid. The error is >

  < 18 September 2013 1:26:05 CEST > < error > < hats > < BEA-149205 > <failed to initialize the em application ' because of the error weblogic.application.ModuleException: cannot load the webapp: ' / em'.

  weblogic.application.ModuleException: cannot load the webapp: ' / em'

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)

  to weblogic.application.internal.flow.ScopedModuleDriver.prepare (ScopedModuleDriver.java:176)

  to weblogic.application.internal.flow.ModuleListenerInvoker.prepare (ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next (DeploymentCallbackFlow.java:517)

  to weblogic.application.utils.StateMachineDriver.nextState (StateMachineDriver .java: 52)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal

  .taglib. UIXCollectionTag

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  Truncated. check the log file full stacktrace

  >

  < 18 September 2013 1:26:07 CEST > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >

  Hello, pay attention to:

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal

  .taglib. UIXCollectionTag

  The solution is here:

  EM fails to start after Config with BEA-149205 could not initialize the em application ' (Doc ID 1310884.1)