Could not write metadata in XAVC S. MP4 (Sony) of prelude or first
Images Sony FDR-AX100, XAVC-S is in. MP4 files.
Bridge can write IPTC Core fields in the. MP4 file.
Prelude and Premiere Pro, July 2015 versions cannot.
It doesn't seem to matter whether UHD size files, or the 720 p files.
It isn't a problem with file permissions, because the bridge is able to write very well.
Someone else has the experience to do this job?
I saw this thread similar subitems disappeared, from 2014, but it ended without any resolution.
Were there no resolution or progress?
Will file the bug report.
End of 2013 Mac Pro, D700, OSX 10.10.4 CC 2015 July 2015 (although I suspect earlier versions had the same problem)
Post edited by: Keith Johnson, correction of typo in the title, specify the text
Hi Swiss and kbjohnson1,
Please install the last update prelude 4.1 of the CC. The problem should be solved. Updated if the problem is still reproducible.
Thank you
Mayjain
Tags: Adobe Prelude
Similar Questions
-
error: could not write the destination file (1 003)
I am trying to export 40 photos of Photos. I just installed OX El Capitan. Only 13 of them get downloadable. For the rest, I get this message: error: could not write the destination file (1 003)
I tried to manually fix the library but still does not work (command + option + opening photos).
And I do not have a backup on icloud photo library I have a backup on an external drive...
You try to export the originals of your photos or revised versions?
When you try to export photos to?
You try to export to a folder on your system drive or a folder on an external drive? If an external drive, which is the file system? And how the player is connected?
You have permissions to write to the folder, when you export to?
-
The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on ok to terminate the program.
Some programs that you have running is a failure. You have to find what it is that you can take appropriate measures such as uninstall/reinstall the program if it is legitimate. The first thing to do is to always make sure that the computer is free of viruses/malware:
http://www.elephantboycomputers.com/page2.html#Removing_Malware
If the computer is clean, you can use a combination of Process Manager, the Configuration system, AutoRuns and boot in diagnostic mode utility to find out what is running and otherwise.
Start > run > msconfig [Enter]
This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".
Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.
How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspxYou can get Process Manager from the same link from Sysinternals above.
Clean boot in Windows XP - http://support.microsoft.com/kb/310353
Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434MS - MVP - Elephant Boy computers - don't panic!
-
Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.
I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.
I tried to restart and it did not help at all. Please, can someone help me? Please?
Hi Alicia,.
1 update you tried to install?
Method 1:
You can try to run a SFC scan and check.
This problem may occur if a system file is missing or damaged.
You can refer to the method-the System File Checker tool in the following article:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Step 1:
Check the updates that are installed recently.
You can view the following link to check the installed updates:
See the Windows updates are installed
Step 2:
You can uninstall these updates and try to install the update one at a time and check for the issue.
Method 3:
You can also try a system restore to a restore point before the updates were installed.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Hope this information is useful.
-
I try to install the codec for the opening of "cr2" RAW files, and a message appears until the installation is complete. It is said:
Could not write value to key Progid
\SOFTWARE\Microsoft\Windows\Current Version\Explorer\FileExts\.sr2\userChoice. Check that you have enough measure to this key, or contact your support team.
I am the "personal support" and I don't have any idea.
I try try again and ignore and they have all two 'ignore' me. Down load always freezes at about 75%, and I have to cancel.
Please stop before I try again!
The answer seems to be on the forum. Try here:
-
Hi all
The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key. Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.Hi Vincentand welcome to the VMware communities!
This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry. Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?
See you soon,.
--
Darius
-
This message appeared at the start. I clicked on Cancel to debug, but it keeps appearing whenever I start my computer. Someone knows why?
What a pity that the forums MS Answers does not prompt for any information system when a new question is asked.
Resolution of the problems would be much faster and without a lot of trial and error and guessing if this was the case.
If you see messages similar to this:
Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".
It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.
Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.
Click Start, run and enter in the box:
services.msc
Click OK to launch the Services Applet
Locate the Windows Driver Foundation - User-mode Driver Framework service, right-click on the service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.
Note that you will not be able to 'Stop' Service first, but it's OK.
Restart your system (the WDF service is now disabled) and check your failure condition now.
-
I could not find an appropriate category to post this question to
I have problems installins SQL Server management Studio
I tried different steps from
Change the permissions of the local user during execution of the registry editor and the installer with administrator
I checked more similar posts here in the forums and followed their steps, but no progress
This is the error message
I could not resolve so far, I am in this problem for 4 days, until now tried various suggestions but no progress, I'm in a hurry, so please help me
Kind regards
Omar
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Setup Skype 6.16 error: could not write value to key
Hello, I have a windows 8 PC and ive been using Skype, because I got it and now all of a sudden when I try to open Skype it says installing version 6.16 then it comes up with an error that says:
"Couldn't write valur Exposeicon key.
\Software\Microsoft\Windows\CurrentVersion\Uninstall\{7a3c7e05-ee37-47D6-99e1-2eb05a3da3f7}.
Check that you have sufficient access to that key. or contact your support perosnnel. »
Please help me with this error, Ive looked all over and I can't find anything for her
Try this to update your Skype to the 6.18.0.105 currently the latest version:
Be aware that if you want to install the 6.18.0.105 currently the latest version, then you must use this msi installer link in order to extract the Skype.exe and Login.cab files:
-
I can't run even system restore!
Hi davidrbaker,
1 are logged as administrator?
2. What is the exact error message you get when the system restore does not work?
3. you remember to make changes to the computer, after which the issue started?
Try the following:
Step 1:
Because of TurboTax, I suggest you try the steps from the following link:
http://TurboTax.Intuit.com/support/IQ/TurboTax/error-1304--error-writing-to-file/SLN12333.html
Step 2:
Due to system restore, you can have a look on the link to the following article:
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
I hope this helps.
-
It was installed earlier was not just
Hi steppie,
Method: 1
Disable security software
For example: Anti Virus software, software spyware, firewall
Clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can perform diagnostic tests to determine what elements of the normal starting procedure are causing problems.
Clean clean boot:
1. click on start, type msconfig in the search box and press ENTER.
The user account control permission.
If you are prompted for an administrator password or confirmation, type
password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load starting points.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click on restart.
Method: 2
Create a new user account with Admin rights
Please visit the following link on how to create a new user account in Windows Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
After creating a new user account.
Restart your computer
You will find the name of the new user account on the Welcome screen. Select the name of the new user account and take it to on the desktop
Try to install the Webcam software
Check whether the problem is resolved.
Thank you and best regards,
Zaki
Microsoft technical support.
-
Windows 7 backup could not write to disc error 0 x 80070005 network "access denied."
I spent the last hour looking at the Knowledge Base. There just aren't clear answers, so let's try again.
I am running Window 7 profressionelle.
I'm doing a return upwards using the backup of Windows 7.
Backup target is a network (Western Digital MyBookLive) drive
I can connect to the drive mapping (z) or by using the path network (\\MyBookLive\Backup)
Using the Explorer, I have AUTHORIZED AND CAN create, delete, and copy files. I can also create or delete directories.
Using Windows 7 backup, I add the network drive when you are prompted, as well as the user name and password. No error on this point.
When I run the backup, a number of xxx movies. TMP files are written to the network drive. So, the app has permission to create files.
However, I get an "Access denied" error with an error code 0 x 80070005
________________________________________________________________
Solutions 1
"I tried a solution of the evolution of the network security: LAN Manager authentication level."
"Send LM and NTLM & - use NTLMv2 session security if negotiated".
It did not work.
Solution 2
I use Avast antivirus. I have it turned off. It did not work.
Solution 3
Turned off the Windows Firewall. It did not work.
Help, please.
Hi phwayne,
Please see the thread with a similar problem and fix possible:
It seems you have tried some of the troubleshooting list, but others you can try.
I hope this helps!
-
So I was playing just these games a month ago and it worked fine but now they wont even load when I try to run the game and other games that require the CD gives me this error in license data. I tried to restart my computer, reinstall games and updated my drivers and still nothing is fixing this.
Any ideas?
RtNVicious,
Please post with more specific information on your problem. Please check the following post to get the necessary information in the gaming forum.What to post in the forum games
Also, these links may have some useful information for you:
Windows 7 Compatibility Center
Windows Vista Compatibility Center
Make older programs run on Windows 7
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I got this message when I try to install software in one of my desktops. but in the other computer, the software has been installed successfully... HELP PLEASE...
Please run a check of system files (SFC)All instructions are in our Wiki article below...
If you have any questions please ask us for . -
Could not find a way to connect my Sony headphones to my TV Bravia KDL-32BX310
My TV Bravia KDL-32BX310 has "Audio In" (red and white) female connectors, but there does appear to be an 'Audio OUT', so I can't find a way to connect my new Sony headphones. (It doesn't seem to have a 'digital output'-looking on the site of the port. Help please!
Hello Gene,
What is the model number of Sony headphones? Most Sony headphones can be plugged into the Audio OUTPUT of a TV port. However, your TV Sony is not any Audio port OUT but has an optical Digital Audio OUT port. Only a few select Sony headphones have the possibility to connect to optical Digital OUT port of the TV.
If your headphones do not have the possibility to connect to the Audio Digital OUT from the TV, then, Alternatively, you can connect the Sony headphones to the Audio OUTPUT of the source device port. For example, if you look at the cable program and the decoder has the Audio OUTPUT port, you can connect the headset to the cable box to listen to the sound.
If my post answered your question, please mark it as an "accepted Solution".
Thank you for your message.
Maybe you are looking for
-
Hello forum,. My first time posting. Just bought a HP SlATE 7 for casual, on the use of GB. I need help to configure the download of pictures from my digital camera, so I have a backup storage or when on a wifi connection can upload them to Picasa
-
Tecra S3 - need drivers for Win XP
Hello world. After formatting with XP Pro, had problems with the computer, do not recognize the hard drive.Sets by slipstreaming with raid drivers. My main problem now is a lot of missing drivers, including the no sound, lan, said as I don't have a m
-
Sype for linux don't remember password
Sype for linux do not remember password and each time when I loged in I have to type it again - any solution for this
-
When you try to open the files of the Axon, I get the following Unable to load the file "C:\Users\Circuit\Desktop\CCF MUSIC\Patient 7\pt7smp3.abf" with the magazine "Axon_ABF". Additional information:"Unable to load the file selected from the
-
How to add values in a textbox control
I work in a 2005 windows form application. I m design a sheet of cricket match, that I have a text box that contains the values (1,2,3,1,3,2,3) like that, now I need get the sum of all these values and display it in another text box. In this i m not